[SCSI] qla2xxx: Swap enablement order of EFT and FCE.

The firmware group has suggested that FCE (Fibre Channel Event)
tracing be enabled prior to EFT (Extended Firmware Tracing) to
maximize the capturing of data on the wire.  This change has no
real semantic effect on driver operation, as it's mostly a
shuffling of code.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/qla2xxx/qla_init.c

@@ -768,42 +768,16 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		mem_size = (ha->fw_memory_size - 0x100000 + 1) *
 		    sizeof(uint32_t);
 
-		/* Allocate memory for Extended Trace Buffer. */
-		tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
-		    GFP_KERNEL);
-		if (!tc) {
-			qla_printk(KERN_WARNING, ha, "Unable to allocate "
-			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
-			goto cont_alloc;
-		}
-
-		memset(tc, 0, EFT_SIZE);
-		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
-		if (rval) {
-			qla_printk(KERN_WARNING, ha, "Unable to initialize "
-			    "EFT (%d).\n", rval);
-			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
-			    tc_dma);
-			goto cont_alloc;
-		}
-
-		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
-		    EFT_SIZE / 1024);
-
-		eft_size = EFT_SIZE;
-		ha->eft_dma = tc_dma;
-		ha->eft = tc;
-
 		/* Allocate memory for Fibre Channel Event Buffer. */
 		if (!IS_QLA25XX(ha))
-			goto cont_alloc;
+			goto try_eft;
 
 		tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
 		    GFP_KERNEL);
 		if (!tc) {
 			qla_printk(KERN_WARNING, ha, "Unable to allocate "
 			    "(%d KB) for FCE.\n", FCE_SIZE / 1024);
-			goto cont_alloc;
+			goto try_eft;
 		}
 
 		memset(tc, 0, FCE_SIZE);
@@ -815,7 +789,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 			dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
 			    tc_dma);
 			ha->flags.fce_enabled = 0;
-			goto cont_alloc;
+			goto try_eft;
 		}
 
 		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
@@ -825,6 +799,32 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		ha->flags.fce_enabled = 1;
 		ha->fce_dma = tc_dma;
 		ha->fce = tc;
+try_eft:
+		/* Allocate memory for Extended Trace Buffer. */
+		tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
+		    GFP_KERNEL);
+		if (!tc) {
+			qla_printk(KERN_WARNING, ha, "Unable to allocate "
+			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
+			goto cont_alloc;
+		}
+
+		memset(tc, 0, EFT_SIZE);
+		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
+		if (rval) {
+			qla_printk(KERN_WARNING, ha, "Unable to initialize "
+			    "EFT (%d).\n", rval);
+			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
+			    tc_dma);
+			goto cont_alloc;
+		}
+
+		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
+		    EFT_SIZE / 1024);
+
+		eft_size = EFT_SIZE;
+		ha->eft_dma = tc_dma;
+		ha->eft = tc;
 	}
 cont_alloc:
 	req_q_size = ha->request_q_length * sizeof(request_t);
@@ -3286,17 +3286,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 			ha->isp_abort_cnt = 0;
 			clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
 
-			if (ha->eft) {
-				memset(ha->eft, 0, EFT_SIZE);
-				rval = qla2x00_enable_eft_trace(ha,
-				    ha->eft_dma, EFT_NUM_BUFFERS);
-				if (rval) {
-					qla_printk(KERN_WARNING, ha,
-					    "Unable to reinitialize EFT "
-					    "(%d).\n", rval);
-				}
-			}
-
 			if (ha->fce) {
 				ha->flags.fce_enabled = 1;
 				memset(ha->fce, 0,
@@ -3311,6 +3300,17 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 					ha->flags.fce_enabled = 0;
 				}
 			}
+
+			if (ha->eft) {
+				memset(ha->eft, 0, EFT_SIZE);
+				rval = qla2x00_enable_eft_trace(ha,
+				    ha->eft_dma, EFT_NUM_BUFFERS);
+				if (rval) {
+					qla_printk(KERN_WARNING, ha,
+					    "Unable to reinitialize EFT "
+					    "(%d).\n", rval);
+				}
+			}
 		} else {	/* failed the ISP abort */
 			ha->flags.online = 1;
 			if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {