提交 42d54689 编写于 作者: B Borislav Petkov 提交者: Bartlomiej Zolnierkiewicz

ide-tape: remove pipelined mode tape control flags

[bart: sync patch with current code and fix idetape_init_read()]
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 0aa4b01e
......@@ -221,19 +221,15 @@ enum {
/* 0 When the tape position is unknown */
IDETAPE_FLAG_ADDRESS_VALID = (1 << 1),
/* Device already opened */
IDETAPE_FLAG_BUSY = (1 << 2),
/* Error detected in a pipeline stage */
IDETAPE_FLAG_PIPELINE_ERR = (1 << 3),
IDETAPE_FLAG_BUSY = (1 << 2),
/* Attempt to auto-detect the current user block size */
IDETAPE_FLAG_DETECT_BS = (1 << 4),
IDETAPE_FLAG_DETECT_BS = (1 << 3),
/* Currently on a filemark */
IDETAPE_FLAG_FILEMARK = (1 << 5),
IDETAPE_FLAG_FILEMARK = (1 << 4),
/* DRQ interrupt device */
IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 6),
/* pipeline active */
IDETAPE_FLAG_PIPELINE_ACTIVE = (1 << 7),
IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 5),
/* 0 = no tape is loaded, so we don't rewind after ejecting */
IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 8),
IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 6),
};
/* A pipeline stage. */
......@@ -695,7 +691,6 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
ide_end_drive_cmd(drive, 0, 0);
clear_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
spin_unlock_irqrestore(&tape->lock, flags);
return 0;
}
......@@ -1728,8 +1723,6 @@ static int __idetape_discard_read_pipeline(ide_drive_t *drive)
tape->merge_stage = NULL;
}
/* Clear pipeline flags. */
clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
tape->chrdev_dir = IDETAPE_DIR_NONE;
/* Remove pipeline stages. */
......@@ -1808,12 +1801,6 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) {
printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n",
__func__);
return (0);
}
idetape_init_rq(&rq, cmd);
rq.rq_disk = tape->disk;
rq.special = (void *)bh;
......@@ -1931,7 +1918,6 @@ static void idetape_empty_write_pipeline(ide_drive_t *drive)
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
}
clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
tape->chrdev_dir = IDETAPE_DIR_NONE;
/*
......@@ -1993,14 +1979,13 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
}
}
if (!test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) {
if (tape->nr_pending_stages >= 3 * max_stages / 4) {
tape->measure_insert_time = 1;
tape->insert_time = jiffies;
tape->insert_size = 0;
tape->insert_speed = 0;
}
if (tape->nr_pending_stages >= 3 * max_stages / 4) {
tape->measure_insert_time = 1;
tape->insert_time = jiffies;
tape->insert_size = 0;
tape->insert_speed = 0;
}
return 0;
}
......@@ -2020,9 +2005,6 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
idetape_init_read(drive, tape->max_stages);
if (test_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags))
return 0;
return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
tape->merge_stage->bh);
}
......@@ -2604,9 +2586,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags))
(void)idetape_rewind_tape(drive);
if (tape->chrdev_dir != IDETAPE_DIR_READ)
clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
/* Read block size and write protect status from drive. */
ide_tape_get_bsize_from_bdesc(drive);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册