OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support

FB_OMAP_BOOTLOADER_INIT does not work, and it was only partially
implemented for SDI.

This patch removes support for FB_OMAP_BOOTLOADER_INIT to clean up the
code and to remove any assumptions that FB_OMAP_BOOTLOADER_INIT would
work.

Proper implementation is much more complex, requiring early boot time
register and clock handling to keep the DSS running.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/omap2/dss/core.c

@@ -166,7 +166,6 @@ static inline void dss_uninitialize_debugfs(void)
 static int omap_dss_probe(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
-	int skip_init = 0;
 	int r;
 	int i;
 
@@ -210,13 +209,8 @@ static int omap_dss_probe(struct platform_device *pdev)
 		goto err_venc;
 	}
 
-#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
-	/* DISPC_CONTROL */
-	if (omap_readl(0x48050440) & 1)	/* LCD enabled? */
-		skip_init = 1;
-#endif
 	if (cpu_is_omap34xx()) {
-		r = sdi_init(skip_init);
+		r = sdi_init();
 		if (r) {
 			DSSERR("Failed to initialize SDI\n");
 			goto err_sdi;

drivers/video/omap2/dss/dss.c

@@ -559,7 +559,7 @@ void dss_set_dac_pwrdn_bgz(bool enable)
 	REG_FLD_MOD(DSS_CONTROL, enable, 5, 5);	/* DAC Power-Down Control */
 }
 
-static int dss_init(bool skip_init)
+static int dss_init(void)
 {
 	int r;
 	u32 rev;
@@ -578,22 +578,20 @@ static int dss_init(bool skip_init)
 		goto fail0;
 	}
 
-	if (!skip_init) {
-		/* disable LCD and DIGIT output. This seems to fix the synclost
-		 * problem that we get, if the bootloader starts the DSS and
-		 * the kernel resets it */
-		omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
-
-		/* We need to wait here a bit, otherwise we sometimes start to
-		 * get synclost errors, and after that only power cycle will
-		 * restore DSS functionality. I have no idea why this happens.
-		 * And we have to wait _before_ resetting the DSS, but after
-		 * enabling clocks.
-		 */
-		msleep(50);
-
-		_omap_dss_reset();
-	}
+	/* disable LCD and DIGIT output. This seems to fix the synclost
+	 * problem that we get, if the bootloader starts the DSS and
+	 * the kernel resets it */
+	omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
+
+	/* We need to wait here a bit, otherwise we sometimes start to
+	 * get synclost errors, and after that only power cycle will
+	 * restore DSS functionality. I have no idea why this happens.
+	 * And we have to wait _before_ resetting the DSS, but after
+	 * enabling clocks.
+	 */
+	msleep(50);
+
+	_omap_dss_reset();
 
 	/* autoidle */
 	REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
@@ -954,7 +952,6 @@ void dss_debug_dump_clocks(struct seq_file *s)
 static int omap_dsshw_probe(struct platform_device *pdev)
 {
 	int r;
-	int skip_init = 0;
 
 	dss.pdev = pdev;
 
@@ -967,13 +964,7 @@ static int omap_dsshw_probe(struct platform_device *pdev)
 	dss.ctx_id = dss_get_ctx_id();
 	DSSDBG("initial ctx id %u\n", dss.ctx_id);
 
-#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
-	/* DISPC_CONTROL */
-	if (omap_readl(0x48050440) & 1)	/* LCD enabled? */
-		skip_init = 1;
-#endif
-
-	r = dss_init(skip_init);
+	r = dss_init();
 	if (r) {
 		DSSERR("Failed to initialize DSS\n");
 		goto err_dss;

drivers/video/omap2/dss/dss.h

@@ -251,11 +251,11 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
 
 /* SDI */
 #ifdef CONFIG_OMAP2_DSS_SDI
-int sdi_init(bool skip_init);
+int sdi_init(void);
 void sdi_exit(void);
 int sdi_init_display(struct omap_dss_device *display);
 #else
-static inline int sdi_init(bool skip_init)
+static inline int sdi_init(void)
 {
 	return 0;
 }

drivers/video/omap2/dss/sdi.c

@@ -30,7 +30,6 @@
 #include "dss.h"
 
 static struct {
-	bool skip_init;
 	bool update_enabled;
 	struct regulator *vdds_sdi_reg;
 } sdi;
@@ -68,9 +67,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err1;
 
-	/* In case of skip_init sdi_init has already enabled the clocks */
-	if (!sdi.skip_init)
-		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
 
 	sdi_basic_init(dssdev);
 
@@ -80,14 +77,8 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
 			dssdev->panel.acbi, dssdev->panel.acb);
 
-	if (!sdi.skip_init) {
-		r = dss_calc_clock_div(1, t->pixel_clock * 1000,
-				&dss_cinfo, &dispc_cinfo);
-	} else {
-		r = dss_get_clock_div(&dss_cinfo);
-		r = dispc_get_clock_div(dssdev->manager->id, &dispc_cinfo);
-	}
-
+	r = dss_calc_clock_div(1, t->pixel_clock * 1000,
+			&dss_cinfo, &dispc_cinfo);
 	if (r)
 		goto err2;
 
@@ -116,18 +107,14 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err2;
 
-	if (!sdi.skip_init) {
-		dss_sdi_init(dssdev->phy.sdi.datapairs);
-		r = dss_sdi_enable();
-		if (r)
-			goto err1;
-		mdelay(2);
-	}
+	dss_sdi_init(dssdev->phy.sdi.datapairs);
+	r = dss_sdi_enable();
+	if (r)
+		goto err1;
+	mdelay(2);
 
 	dssdev->manager->enable(dssdev->manager);
 
-	sdi.skip_init = 0;
-
 	return 0;
 err2:
 	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
@@ -173,17 +160,8 @@ int sdi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-int sdi_init(bool skip_init)
+int sdi_init(void)
 {
-	/* we store this for first display enable, then clear it */
-	sdi.skip_init = skip_init;
-
-	/*
-	 * Enable clocks already here, otherwise there would be a toggle
-	 * of them until sdi_display_enable is called.
-	 */
-	if (skip_init)
-		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
 	return 0;
 }