提交 42b64a45 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Consolidate autoneg advertisement setup code

Autonegotiation setup has gotten a little more complicated since the tg3
driver was created.  This patch consolidates autoneg setup into one
routine and modifies the call sites accordingly.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 b0c5943f
......@@ -2929,102 +2929,54 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
}
}
static void tg3_phy_copper_begin(struct tg3 *tp)
static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl)
{
u32 new_adv;
int i;
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
/* Entering low power mode. Disable gigabit and
* 100baseT advertisements.
*/
tg3_writephy(tp, MII_TG3_CTRL, 0);
int err = 0;
u32 val, new_adv;
new_adv = (ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
if (tg3_flag(tp, WOL_SPEED_100MB))
new_adv |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
new_adv = ADVERTISE_CSMA;
if (advertise & ADVERTISED_10baseT_Half)
new_adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
new_adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
new_adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
new_adv |= ADVERTISE_100FULL;
tg3_writephy(tp, MII_ADVERTISE, new_adv);
} else if (tp->link_config.speed == SPEED_INVALID) {
if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
tp->link_config.advertising &=
~(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
new_adv |= tg3_advert_flowctrl_1000T(flowctrl);
new_adv = ADVERTISE_CSMA;
if (tp->link_config.advertising & ADVERTISED_10baseT_Half)
new_adv |= ADVERTISE_10HALF;
if (tp->link_config.advertising & ADVERTISED_10baseT_Full)
new_adv |= ADVERTISE_10FULL;
if (tp->link_config.advertising & ADVERTISED_100baseT_Half)
new_adv |= ADVERTISE_100HALF;
if (tp->link_config.advertising & ADVERTISED_100baseT_Full)
new_adv |= ADVERTISE_100FULL;
new_adv |= tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (tp->link_config.advertising &
(ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
new_adv = 0;
if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
if (tp->link_config.advertising & ADVERTISED_1000baseT_Full)
new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY) &&
(tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0))
new_adv |= (MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
} else {
tg3_writephy(tp, MII_TG3_CTRL, 0);
}
} else {
new_adv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
new_adv |= ADVERTISE_CSMA;
err = tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (err)
goto done;
/* Asking for a specific link mode. */
if (tp->link_config.speed == SPEED_1000) {
tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
goto done;
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv = MII_TG3_CTRL_ADV_1000_FULL;
else
new_adv = MII_TG3_CTRL_ADV_1000_HALF;
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
new_adv |= (MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
} else {
if (tp->link_config.speed == SPEED_100) {
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv |= ADVERTISE_100FULL;
else
new_adv |= ADVERTISE_100HALF;
} else {
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv |= ADVERTISE_10FULL;
else
new_adv |= ADVERTISE_10HALF;
}
tg3_writephy(tp, MII_ADVERTISE, new_adv);
new_adv = 0;
if (advertise & ADVERTISED_1000baseT_Half)
new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
if (advertise & ADVERTISED_1000baseT_Full)
new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
new_adv = 0;
}
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
new_adv |= (MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
}
err = tg3_writephy(tp, MII_TG3_CTRL, new_adv);
if (err)
goto done;
if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
u32 val;
if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
goto done;
tw32(TG3_CPMU_EEE_MODE,
tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
tw32(TG3_CPMU_EEE_MODE,
tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
TG3_PHY_AUXCTL_SMDSP_ENABLE(tp);
err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp);
if (!err) {
u32 err2;
switch (GET_ASIC_REV(tp->pci_chip_rev_id)) {
case ASIC_REV_5717:
......@@ -3041,19 +2993,66 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
}
val = 0;
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
/* Advertise 100-BaseTX EEE ability */
if (tp->link_config.advertising &
ADVERTISED_100baseT_Full)
val |= MDIO_AN_EEE_ADV_100TX;
/* Advertise 1000-BaseT EEE ability */
if (tp->link_config.advertising &
ADVERTISED_1000baseT_Full)
val |= MDIO_AN_EEE_ADV_1000T;
/* Advertise 100-BaseTX EEE ability */
if (advertise & ADVERTISED_100baseT_Full)
val |= MDIO_AN_EEE_ADV_100TX;
/* Advertise 1000-BaseT EEE ability */
if (advertise & ADVERTISED_1000baseT_Full)
val |= MDIO_AN_EEE_ADV_1000T;
err = tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
err2 = TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
if (!err)
err = err2;
}
done:
return err;
}
static void tg3_phy_copper_begin(struct tg3 *tp)
{
u32 new_adv;
int i;
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
new_adv = ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full;
if (tg3_flag(tp, WOL_SPEED_100MB))
new_adv |= ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full;
tg3_phy_autoneg_cfg(tp, new_adv,
FLOW_CTRL_TX | FLOW_CTRL_RX);
} else if (tp->link_config.speed == SPEED_INVALID) {
if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
tp->link_config.advertising &=
~(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
tg3_phy_autoneg_cfg(tp, tp->link_config.advertising,
tp->link_config.flowctrl);
} else {
/* Asking for a specific link mode. */
if (tp->link_config.speed == SPEED_1000) {
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv = ADVERTISED_1000baseT_Full;
else
new_adv = ADVERTISED_1000baseT_Half;
} else if (tp->link_config.speed == SPEED_100) {
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv = ADVERTISED_100baseT_Full;
else
new_adv = ADVERTISED_100baseT_Half;
} else {
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv = ADVERTISED_10baseT_Full;
else
new_adv = ADVERTISED_10baseT_Half;
}
tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
tg3_phy_autoneg_cfg(tp, new_adv,
tp->link_config.flowctrl);
}
if (tp->link_config.autoneg == AUTONEG_DISABLE &&
......@@ -12953,7 +12952,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
!tg3_flag(tp, ENABLE_APE) &&
!tg3_flag(tp, ENABLE_ASF)) {
u32 bmsr, adv_reg, tg3_ctrl, mask;
u32 bmsr, mask;
tg3_readphy(tp, MII_BMSR, &bmsr);
if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
......@@ -12964,36 +12963,18 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
if (err)
return err;
adv_reg = (ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL |
ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
tg3_ctrl = 0;
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
tg3_ctrl = (MII_TG3_CTRL_ADV_1000_HALF |
MII_TG3_CTRL_ADV_1000_FULL);
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
tg3_ctrl |= (MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
}
tg3_phy_set_wirespeed(tp);
mask = (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full);
if (!tg3_copper_is_advertising_all(tp, mask)) {
tg3_writephy(tp, MII_ADVERTISE, adv_reg);
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
tg3_phy_autoneg_cfg(tp, tp->link_config.advertising,
tp->link_config.flowctrl);
tg3_writephy(tp, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART);
}
tg3_phy_set_wirespeed(tp);
tg3_writephy(tp, MII_ADVERTISE, adv_reg);
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
}
skip_phy_reset:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册