提交 42973159 编写于 作者: R Roger Quadros

ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)

Let's have a single platform data structure for the OMAP's High-Speed
USB host subsystem instead of having 3 separate ones i.e. one for
board data, one for USB Host (UHH) module and one for USB-TLL module.

This makes the code much simpler and avoids creating multiple copies of
platform data.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
上级 7f07863e
......@@ -424,7 +424,7 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
......
......@@ -53,7 +53,7 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
......
......@@ -40,7 +40,7 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -274,7 +274,7 @@ static __init void am3517_evm_mcbsp1_init(void)
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
......
......@@ -418,7 +418,7 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -166,7 +166,7 @@ static inline void cm_t3517_init_rtc(void) {}
#define HSUSB2_RESET_GPIO (147)
#define USB_HUB_RESET_GPIO (152)
static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -435,7 +435,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
&omap_dm9000_dev,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -526,7 +526,7 @@ static void __init igep_i2c_init(void)
omap3_pmic_init("twl4030", &igep_twldata);
}
static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......@@ -537,7 +537,7 @@ static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
.reset_gpio_port[2] = -EINVAL,
};
static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -430,7 +430,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
&madc_hwmon,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
......
......@@ -538,7 +538,7 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
......
......@@ -567,7 +567,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_backlight,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
......
......@@ -361,7 +361,7 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
static struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -309,7 +309,7 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = {
&keys_gpio,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
......
......@@ -139,7 +139,7 @@ static struct platform_device *panda_devices[] __initdata = {
&btwilink_device,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -457,7 +457,7 @@ static int __init overo_spi_init(void)
return 0;
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -92,7 +92,7 @@ static struct mtd_partition zoom_nand_partitions[] = {
},
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
......
......@@ -37,11 +37,6 @@
#define USBHS_UHH_HWMODNAME "usb_host_hs"
#define USBHS_TLL_HWMODNAME "usb_tll_hs"
static struct usbhs_omap_platform_data usbhs_data;
static struct usbtll_omap_platform_data usbtll_data;
static struct ehci_hcd_omap_platform_data ehci_data;
static struct ohci_hcd_omap_platform_data ohci_data;
static struct omap_device_pm_latency omap_uhhtll_latency[] = {
{
.deactivate_func = omap_device_idle_hwmods,
......@@ -485,32 +480,18 @@ void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
}
}
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
{
struct omap_hwmod *uhh_hwm, *tll_hwm;
struct platform_device *pdev;
int bus_id = -1;
int i;
for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
usbhs_data.port_mode[i] = pdata->port_mode[i];
usbtll_data.port_mode[i] = pdata->port_mode[i];
ohci_data.port_mode[i] = pdata->port_mode[i];
ehci_data.port_mode[i] = pdata->port_mode[i];
ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
ehci_data.regulator[i] = pdata->regulator[i];
}
ehci_data.phy_reset = pdata->phy_reset;
ohci_data.es2_compatibility = pdata->es2_compatibility;
usbhs_data.ehci_data = &ehci_data;
usbhs_data.ohci_data = &ohci_data;
if (cpu_is_omap34xx()) {
setup_ehci_io_mux(pdata->port_mode);
setup_ohci_io_mux(pdata->port_mode);
if (omap_rev() <= OMAP3430_REV_ES2_1)
usbhs_data.single_ulpi_bypass = true;
pdata->single_ulpi_bypass = true;
} else if (cpu_is_omap44xx()) {
setup_4430ehci_io_mux(pdata->port_mode);
......@@ -530,7 +511,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
}
pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
&usbtll_data, sizeof(usbtll_data),
pdata, sizeof(*pdata),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
if (IS_ERR(pdev)) {
......@@ -540,7 +521,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
}
pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
&usbhs_data, sizeof(usbhs_data),
pdata, sizeof(*pdata),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
if (IS_ERR(pdev)) {
......@@ -552,7 +533,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
#else
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
{
}
......
......@@ -53,26 +53,8 @@
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
struct usbhs_omap_board_data {
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
/* have to be valid if phy_reset is true and portx is in phy mode */
int reset_gpio_port[OMAP3_HS_USB_PORTS];
/* Set this to true for ES2.x silicon */
unsigned es2_compatibility:1;
unsigned phy_reset:1;
/*
* Regulators for USB PHYs.
* Each PHY can have a separate regulator.
*/
struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册