scsi: smartpqi: add smartpqi.txt

added Documentation/scsi/smartpqi.txt

[mkp: applied by hand]
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Documentation/scsi/smartpqi.txt

+
+SMARTPQI - Microsemi Smart PQI Driver
+-----------------------------------------
+
+This file describes the smartpqi SCSI driver for Microsemi
+(http://www.microsemi.com) PQI controllers. The smartpqi driver
+is the next generation SCSI driver for Microsemi Corp. The smartpqi
+driver is the first SCSI driver to implement the PQI queuing model.
+
+The smartpqi driver will replace the aacraid driver for Adaptec Series 9
+controllers. Customers running an older kernel (Pre-4.9) using an Adaptec
+Series 9 controller will have to configure the smartpqi driver or their
+volumes will not be added to the OS.
+
+For Microsemi smartpqi controller support, enable the smartpqi driver
+when configuring the kernel.
+
+For more information on the PQI Queuing Interface, please see:
+http://www.t10.org/drafts.htm
+http://www.t10.org/members/w_pqi2.htm
+
+Supported devices:
+------------------
+<Controller names to be added as they become publically available.>
+
+smartpqi specific entries in /sys
+-----------------------------
+
+  smartpqi host attributes:
+  -------------------------
+  /sys/class/scsi_host/host*/rescan
+  /sys/class/scsi_host/host*/version
+
+  The host rescan attribute is a write only attribute. Writing to this
+  attribute will trigger the driver to scan for new, changed, or removed
+  devices and notify the SCSI mid-layer of any changes detected.
+
+  The version attribute is read-only and will return the driver version
+  and the controller firmware version.
+  For example:
+              driver: 0.9.13-370
+              firmware: 0.01-522
+
+  smartpqi sas device attributes
+  ------------------------------
+  HBA devices are added to the SAS transport layer. These attributes are
+  automatically added by the SAS transport layer.
+
+  /sys/class/sas_device/end_device-X:X/sas_address
+  /sys/class/sas_device/end_device-X:X/enclosure_identifier
+  /sys/class/sas_device/end_device-X:X/scsi_target_id
+
+smartpqi specific ioctls:
+-------------------------
+
+  For compatibility with applications written for the cciss protocol.
+
+  CCISS_DEREGDISK
+  CCISS_REGNEWDISK
+  CCISS_REGNEWD
+
+  The above three ioctls all do exactly the same thing, which is to cause the driver
+  to rescan for new devices.  This does exactly the same thing as writing to the
+  smartpqi specific host "rescan" attribute.
+
+  CCISS_GETPCIINFO
+
+	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
+
+  CCISS_GETDRIVVER
+
+	Returns driver version in three bytes encoded as:
+	(DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;
+
+  CCISS_PASSTHRU
+
+	Allows "BMIC" and "CISS" commands to be passed through to the Smart Storage Array.
+	These are used extensively by the SSA Array Configuration Utility, SNMP storage
+	agents, etc.
+

MAINTAINERS

@@ -7829,6 +7829,7 @@ F:	drivers/scsi/smartpqi/Kconfig
 F:	drivers/scsi/smartpqi/Makefile
 F:	include/linux/cciss*.h
 F:	include/uapi/linux/cciss*.h
+F:	Documentation/scsi/smartpqi.txt
 
 MN88472 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>