Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 424852f4 编写于 作者: H Hans Verkuil 提交者： Mauro Carvalho Chehab
浏览文件
操作

[media] radio-gemtek-pci: remove duplicate driver 

The radio-gemtek-pci driver is for the same hardware as the radio-maxiradio
driver which uses the same GemTek PR103 and tea5757 combination and the two
drivers are identical. I chose the maxiradio over the gemtek-pci driver since
the maxiradio has support for mono/stereo detection.

Tested with my gemtek-pci card.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 90d873a7
隐藏空白更改
内联 并排
Showing with 0 addition and 493 deletion
drivers/media/radio/Kconfig
浏览文件 @ 424852f4
......@@ -151,20 +151,6 @@ config RADIO_GEMTEK_PROBE
following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
0x28c.
config RADIO_GEMTEK_PCI
tristate "GemTek PCI Radio Card support"
depends on VIDEO_V4L2 && PCI
---help---
Choose Y here if you have this PCI FM radio card.
In order to control your radio card, you will need to use programs
that are compatible with the Video for Linux API. Information on
this API and pointers to "v4l" programs may be found at
<file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-gemtek-pci.
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
depends on VIDEO_V4L2 && PCI
......
drivers/media/radio/Makefile
浏览文件 @ 424852f4
......@@ -13,7 +13,6 @@ obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o
obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o
obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o
......
drivers/media/radio/radio-gemtek-pci.c 已删除 100644 → 0
浏览文件 @ 90d873a7
/*
***************************************************************************
*
* radio-gemtek-pci.c - Gemtek PCI Radio driver
* (C) 2001 Vladimir Shebordaev <vshebordaev@mail.ru>
*
***************************************************************************
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the Free
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
* USA.
*
***************************************************************************
*
* Gemtek Corp still silently refuses to release any specifications
* of their multimedia devices, so the protocol still has to be
* reverse engineered.
*
* The v4l code was inspired by Jonas Munsin's Gemtek serial line
* radio device driver.
*
* Please, let me know if this piece of code was useful :)
*
* TODO: multiple device support and portability were not tested
*
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
*
***************************************************************************
*/
#include <linux/types.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/videodev2.h>
#include <linux/errno.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#include <linux/io.h>
#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
MODULE_AUTHOR("Vladimir Shebordaev <vshebordaev@mail.ru>");
MODULE_DESCRIPTION("The video4linux driver for the Gemtek PCI Radio Card");
MODULE_LICENSE("GPL");
static int nr_radio = -1;
static int mx = 1;
module_param(mx, bool, 0);
MODULE_PARM_DESC(mx, "single digit: 1 - turn off the turner upon module exit (default), 0 - do not");
module_param(nr_radio, int, 0);
MODULE_PARM_DESC(nr_radio, "video4linux device number to use");
#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
#ifndef PCI_VENDOR_ID_GEMTEK
#define PCI_VENDOR_ID_GEMTEK 0x5046
#endif
#ifndef PCI_DEVICE_ID_GEMTEK_PR103
#define PCI_DEVICE_ID_GEMTEK_PR103 0x1001
#endif
#ifndef GEMTEK_PCI_RANGE_LOW
#define GEMTEK_PCI_RANGE_LOW (87*16000)
#endif
#ifndef GEMTEK_PCI_RANGE_HIGH
#define GEMTEK_PCI_RANGE_HIGH (108*16000)
#endif
struct gemtek_pci {
struct v4l2_device v4l2_dev;
struct video_device vdev;
struct mutex lock;
struct pci_dev *pdev;
u32 iobase;
u32 length;
u32 current_frequency;
u8 mute;
};
static inline struct gemtek_pci *to_gemtek_pci(struct v4l2_device *v4l2_dev)
{
return container_of(v4l2_dev, struct gemtek_pci, v4l2_dev);
}
static inline u8 gemtek_pci_out(u16 value, u32 port)
{
outw(value, port);
return (u8)value;
}
#define _b0(v) (*((u8 *)&v))
static void __gemtek_pci_cmd(u16 value, u32 port, u8 *last_byte, int keep)
{
u8 byte = *last_byte;
if (!value) {
if (!keep)
value = (u16)port;
byte &= 0xfd;
} else
byte |= 2;
_b0(value) = byte;
outw(value, port);
byte |= 1;
_b0(value) = byte;
outw(value, port);
byte &= 0xfe;
_b0(value) = byte;
outw(value, port);
*last_byte = byte;
}
static inline void gemtek_pci_nil(u32 port, u8 *last_byte)
{
__gemtek_pci_cmd(0x00, port, last_byte, false);
}
static inline void gemtek_pci_cmd(u16 cmd, u32 port, u8 *last_byte)
{
__gemtek_pci_cmd(cmd, port, last_byte, true);
}
static void gemtek_pci_setfrequency(struct gemtek_pci *card, unsigned long frequency)
{
int i;
u32 value = frequency / 200 + 856;
u16 mask = 0x8000;
u8 last_byte;
u32 port = card->iobase;
mutex_lock(&card->lock);
card->current_frequency = frequency;
last_byte = gemtek_pci_out(0x06, port);
i = 0;
do {
gemtek_pci_nil(port, &last_byte);
i++;
} while (i < 9);
i = 0;
do {
gemtek_pci_cmd(value & mask, port, &last_byte);
mask >>= 1;
i++;
} while (i < 16);
outw(0x10, port);
mutex_unlock(&card->lock);
}
static void gemtek_pci_mute(struct gemtek_pci *card)
{
mutex_lock(&card->lock);
outb(0x1f, card->iobase);
card->mute = true;
mutex_unlock(&card->lock);
}
static void gemtek_pci_unmute(struct gemtek_pci *card)
{
if (card->mute) {
gemtek_pci_setfrequency(card, card->current_frequency);
card->mute = false;
}
}
static int gemtek_pci_getsignal(struct gemtek_pci *card)
{
int sig;
mutex_lock(&card->lock);
sig = (inb(card->iobase) & 0x08) ? 0 : 1;
mutex_unlock(&card->lock);
return sig;
}
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
struct gemtek_pci *card = video_drvdata(file);
strlcpy(v->driver, "radio-gemtek-pci", sizeof(v->driver));
strlcpy(v->card, "GemTek PCI Radio", sizeof(v->card));
snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(card->pdev));
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
return 0;
}
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
struct gemtek_pci *card = video_drvdata(file);
if (v->index > 0)
return -EINVAL;
strlcpy(v->name, "FM", sizeof(v->name));
v->type = V4L2_TUNER_RADIO;
v->rangelow = GEMTEK_PCI_RANGE_LOW;
v->rangehigh = GEMTEK_PCI_RANGE_HIGH;
v->rxsubchans = V4L2_TUNER_SUB_MONO;
v->capability = V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal = 0xffff * gemtek_pci_getsignal(card);
return 0;
}
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
return v->index ? -EINVAL : 0;
}
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct gemtek_pci *card = video_drvdata(file);
if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
return -EINVAL;
if (f->frequency < GEMTEK_PCI_RANGE_LOW ||
f->frequency > GEMTEK_PCI_RANGE_HIGH)
return -EINVAL;
gemtek_pci_setfrequency(card, f->frequency);
card->mute = false;
return 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct gemtek_pci *card = video_drvdata(file);
if (f->tuner != 0)
return -EINVAL;
f->type = V4L2_TUNER_RADIO;
f->frequency = card->current_frequency;
return 0;
}
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
switch (qc->id) {
case V4L2_CID_AUDIO_MUTE:
return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
case V4L2_CID_AUDIO_VOLUME:
return v4l2_ctrl_query_fill(qc, 0, 65535, 65535, 65535);
}
return -EINVAL;
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct gemtek_pci *card = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = card->mute;
return 0;
case V4L2_CID_AUDIO_VOLUME:
if (card->mute)
ctrl->value = 0;
else
ctrl->value = 65535;
return 0;
}
return -EINVAL;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct gemtek_pci *card = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value)
gemtek_pci_mute(card);
else
gemtek_pci_unmute(card);
return 0;
case V4L2_CID_AUDIO_VOLUME:
if (ctrl->value)
gemtek_pci_unmute(card);
else
gemtek_pci_mute(card);
return 0;
}
return -EINVAL;
}
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
*i = 0;
return 0;
}
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
return i ? -EINVAL : 0;
}
static int vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
a->index = 0;
strlcpy(a->name, "Radio", sizeof(a->name));
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
return a->index ? -EINVAL : 0;
}
enum {
GEMTEK_PR103
};
static char *card_names[] __devinitdata = {
"GEMTEK_PR103"
};
static struct pci_device_id gemtek_pci_id[] =
{
{ PCI_VENDOR_ID_GEMTEK, PCI_DEVICE_ID_GEMTEK_PR103,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, GEMTEK_PR103 },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, gemtek_pci_id);
static const struct v4l2_file_operations gemtek_pci_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
};
static int __devinit gemtek_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
struct gemtek_pci *card;
struct v4l2_device *v4l2_dev;
int res;
card = kzalloc(sizeof(struct gemtek_pci), GFP_KERNEL);
if (card == NULL) {
dev_err(&pdev->dev, "out of memory\n");
return -ENOMEM;
}
v4l2_dev = &card->v4l2_dev;
mutex_init(&card->lock);
card->pdev = pdev;
strlcpy(v4l2_dev->name, "gemtek_pci", sizeof(v4l2_dev->name));
res = v4l2_device_register(&pdev->dev, v4l2_dev);
if (res < 0) {
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
kfree(card);
return res;
}
if (pci_enable_device(pdev))
goto err_pci;
card->iobase = pci_resource_start(pdev, 0);
card->length = pci_resource_len(pdev, 0);
if (request_region(card->iobase, card->length, card_names[pci_id->driver_data]) == NULL) {
v4l2_err(v4l2_dev, "i/o port already in use\n");
goto err_pci;
}
strlcpy(card->vdev.name, v4l2_dev->name, sizeof(card->vdev.name));
card->vdev.v4l2_dev = v4l2_dev;
card->vdev.fops = &gemtek_pci_fops;
card->vdev.ioctl_ops = &gemtek_pci_ioctl_ops;
card->vdev.release = video_device_release_empty;
video_set_drvdata(&card->vdev, card);
gemtek_pci_mute(card);
if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0)
goto err_video;
v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
pdev->revision, card->iobase, card->iobase + card->length - 1);
return 0;
err_video:
release_region(card->iobase, card->length);
err_pci:
v4l2_device_unregister(v4l2_dev);
kfree(card);
return -ENODEV;
}
static void __devexit gemtek_pci_remove(struct pci_dev *pdev)
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
struct gemtek_pci *card = to_gemtek_pci(v4l2_dev);
video_unregister_device(&card->vdev);
v4l2_device_unregister(v4l2_dev);
release_region(card->iobase, card->length);
if (mx)
gemtek_pci_mute(card);
kfree(card);
}
static struct pci_driver gemtek_pci_driver = {
.name = "gemtek_pci",
.id_table = gemtek_pci_id,
.probe = gemtek_pci_probe,
.remove = __devexit_p(gemtek_pci_remove),
};
static int __init gemtek_pci_init(void)
{
return pci_register_driver(&gemtek_pci_driver);
}
static void __exit gemtek_pci_exit(void)
{
pci_unregister_driver(&gemtek_pci_driver);
}
module_init(gemtek_pci_init);
module_exit(gemtek_pci_exit);
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或