Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 4196b918 编写于 作者: I Imre Deak 提交者： Daniel Vetter
浏览文件
操作

drm/i915/gen9+: Unify the HSW/BDW and GEN9+ power well helpers 

After the previous refactorings the HSW/BDW and GEN9+ power well helpers
are practically identical, so use the HSW power well helpers for GEN9+
too. This means using the HSW power well ops instead of the SKL one and
setting the irq_pipe_mask, has_vga and has_fuses attributes as needed.

v2:
- Rebased on v2 of patch 15.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170711204236.5618-7-imre.deak@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 b2891eb2
隐藏空白更改
内联 并排
Showing with 43 addition and 188 deletion
drivers/gpu/drm/i915/intel_runtime_pm.c
浏览文件 @ 4196b918
......@@ -313,38 +313,6 @@ static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv,
gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask);
}
static void skl_power_well_post_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
struct pci_dev *pdev = dev_priv->drm.pdev;
/*
* After we re-enable the power well, if we touch VGA register 0x3d5
* we'll get unclaimed register interrupts. This stops after we write
* anything to the VGA MSR register. The vgacon module uses this
* register all the time, so if we unbind our driver and, as a
* consequence, bind vgacon, we'll get stuck in an infinite loop at
* console_unlock(). So make here we touch the VGA MSR register, making
* sure vgacon can keep working normally without triggering interrupts
* and error messages.
*/
if (power_well->id == SKL_DISP_PW_2) {
vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO);
outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
vga_put(pdev, VGA_RSRC_LEGACY_IO);
gen8_irq_power_well_post_enable(dev_priv,
1 << PIPE_C | 1 << PIPE_B);
}
}
static void skl_power_well_pre_disable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
if (power_well->id == SKL_DISP_PW_2)
gen8_irq_power_well_pre_disable(dev_priv,
1 << PIPE_C | 1 << PIPE_B);
}
static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
......@@ -823,91 +791,6 @@ void skl_disable_dc6(struct drm_i915_private *dev_priv)
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
}
static void skl_set_power_well(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well, bool enable)
{
uint32_t tmp, fuse_status;
uint32_t req_mask, state_mask;
bool check_fuse_status = false;
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
fuse_status = I915_READ(SKL_FUSE_STATUS);
switch (power_well->id) {
case SKL_DISP_PW_1:
if (intel_wait_for_register(dev_priv,
SKL_FUSE_STATUS,
SKL_FUSE_PG_DIST_STATUS(SKL_PG0),
SKL_FUSE_PG_DIST_STATUS(SKL_PG0),
1)) {
DRM_ERROR("PG0 not enabled\n");
return;
}
break;
case SKL_DISP_PW_2:
if (!(fuse_status & SKL_FUSE_PG_DIST_STATUS(SKL_PG1))) {
DRM_ERROR("PG1 in disabled state\n");
return;
}
break;
case SKL_DISP_PW_MISC_IO:
case SKL_DISP_PW_DDI_A_E: /* GLK_DISP_PW_DDI_A, CNL_DISP_PW_DDI_A */
case SKL_DISP_PW_DDI_B:
case SKL_DISP_PW_DDI_C:
case SKL_DISP_PW_DDI_D:
case GLK_DISP_PW_AUX_A: /* CNL_DISP_PW_AUX_A */
case GLK_DISP_PW_AUX_B: /* CNL_DISP_PW_AUX_B */
case GLK_DISP_PW_AUX_C: /* CNL_DISP_PW_AUX_C */
case CNL_DISP_PW_AUX_D:
break;
default:
WARN(1, "Unknown power well %u\n", power_well->id);
return;
}
req_mask = HSW_PWR_WELL_CTL_REQ(power_well->id);
state_mask = HSW_PWR_WELL_CTL_STATE(power_well->id);
if (!enable)
skl_power_well_pre_disable(dev_priv, power_well);
if (enable) {
I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
DRM_DEBUG_KMS("Enabling %s\n", power_well->name);
check_fuse_status = true;
hsw_wait_for_power_well_enable(dev_priv, power_well);
} else {
I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask);
POSTING_READ(HSW_PWR_WELL_DRIVER);
DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
hsw_wait_for_power_well_disable(dev_priv, power_well);
}
if (check_fuse_status) {
if (power_well->id == SKL_DISP_PW_1) {
if (intel_wait_for_register(dev_priv,
SKL_FUSE_STATUS,
SKL_FUSE_PG_DIST_STATUS(SKL_PG1),
SKL_FUSE_PG_DIST_STATUS(SKL_PG1),
1))
DRM_ERROR("PG1 distributing status timeout\n");
} else if (power_well->id == SKL_DISP_PW_2) {
if (intel_wait_for_register(dev_priv,
SKL_FUSE_STATUS,
SKL_FUSE_PG_DIST_STATUS(SKL_PG2),
SKL_FUSE_PG_DIST_STATUS(SKL_PG2),
1))
DRM_ERROR("PG2 distributing status timeout\n");
}
}
if (enable)
skl_power_well_post_enable(dev_priv, power_well);
}
static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
......@@ -925,43 +808,6 @@ static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
}
}
static bool skl_power_well_enabled(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
uint32_t mask = HSW_PWR_WELL_CTL_REQ(power_well->id) |
HSW_PWR_WELL_CTL_STATE(power_well->id);
return (I915_READ(HSW_PWR_WELL_DRIVER) & mask) == mask;
}
static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
uint32_t mask = HSW_PWR_WELL_CTL_REQ(power_well->id);
uint32_t bios_req = I915_READ(HSW_PWR_WELL_BIOS);
/* Take over the request bit if set by BIOS. */
if (bios_req & mask) {
uint32_t drv_req = I915_READ(HSW_PWR_WELL_DRIVER);
if (!(drv_req & mask))
I915_WRITE(HSW_PWR_WELL_DRIVER, drv_req | mask);
I915_WRITE(HSW_PWR_WELL_BIOS, bios_req & ~mask);
}
}
static void skl_power_well_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
skl_set_power_well(dev_priv, power_well, true);
}
static void skl_power_well_disable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
skl_set_power_well(dev_priv, power_well, false);
}
static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
......@@ -2049,13 +1895,6 @@ static const struct i915_power_well_ops hsw_power_well_ops = {
.is_enabled = hsw_power_well_enabled,
};
static const struct i915_power_well_ops skl_power_well_ops = {
.sync_hw = skl_power_well_sync_hw,
.enable = skl_power_well_enable,
.disable = skl_power_well_disable,
.is_enabled = skl_power_well_enabled,
};
static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
.sync_hw = i9xx_power_well_sync_hw_noop,
.enable = gen9_dc_off_power_well_enable,
......@@ -2241,14 +2080,15 @@ static struct i915_power_well skl_power_wells[] = {
.name = "power well 1",
/* Handled by the DMC firmware */
.domains = 0,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_1,
.hsw.has_fuses = true,
},
{
.name = "MISC IO power well",
/* Handled by the DMC firmware */
.domains = 0,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_MISC_IO,
},
{
......@@ -2260,31 +2100,34 @@ static struct i915_power_well skl_power_wells[] = {
{
.name = "power well 2",
.domains = SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_2,
.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
.hsw.has_vga = true,
.hsw.has_fuses = true,
},
{
.name = "DDI A/E IO power well",
.domains = SKL_DISPLAY_DDI_IO_A_E_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_A_E,
},
{
.name = "DDI B IO power well",
.domains = SKL_DISPLAY_DDI_IO_B_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_B,
},
{
.name = "DDI C IO power well",
.domains = SKL_DISPLAY_DDI_IO_C_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_C,
},
{
.name = "DDI D IO power well",
.domains = SKL_DISPLAY_DDI_IO_D_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_D,
},
};
......@@ -2300,8 +2143,9 @@ static struct i915_power_well bxt_power_wells[] = {
{
.name = "power well 1",
.domains = 0,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_1,
.hsw.has_fuses = true,
},
{
.name = "DC off",
......@@ -2312,8 +2156,11 @@ static struct i915_power_well bxt_power_wells[] = {
{
.name = "power well 2",
.domains = BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_2,
.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
.hsw.has_vga = true,
.hsw.has_fuses = true,
},
{
.name = "dpio-common-a",
......@@ -2343,8 +2190,9 @@ static struct i915_power_well glk_power_wells[] = {
.name = "power well 1",
/* Handled by the DMC firmware */
.domains = 0,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_1,
.hsw.has_fuses = true,
},
{
.name = "DC off",
......@@ -2355,8 +2203,11 @@ static struct i915_power_well glk_power_wells[] = {
{
.name = "power well 2",
.domains = GLK_DISPLAY_POWERWELL_2_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_2,
.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
.hsw.has_vga = true,
.hsw.has_fuses = true,
},
{
.name = "dpio-common-a",
......@@ -2382,37 +2233,37 @@ static struct i915_power_well glk_power_wells[] = {
{
.name = "AUX A",
.domains = GLK_DISPLAY_AUX_A_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = GLK_DISP_PW_AUX_A,
},
{
.name = "AUX B",
.domains = GLK_DISPLAY_AUX_B_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = GLK_DISP_PW_AUX_B,
},
{
.name = "AUX C",
.domains = GLK_DISPLAY_AUX_C_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = GLK_DISP_PW_AUX_C,
},
{
.name = "DDI A IO power well",
.domains = GLK_DISPLAY_DDI_IO_A_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = GLK_DISP_PW_DDI_A,
},
{
.name = "DDI B IO power well",
.domains = GLK_DISPLAY_DDI_IO_B_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_B,
},
{
.name = "DDI C IO power well",
.domains = GLK_DISPLAY_DDI_IO_C_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_C,
},
};
......@@ -2429,31 +2280,32 @@ static struct i915_power_well cnl_power_wells[] = {
.name = "power well 1",
/* Handled by the DMC firmware */
.domains = 0,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_1,
.hsw.has_fuses = true,
},
{
.name = "AUX A",
.domains = CNL_DISPLAY_AUX_A_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = CNL_DISP_PW_AUX_A,
},
{
.name = "AUX B",
.domains = CNL_DISPLAY_AUX_B_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = CNL_DISP_PW_AUX_B,
},
{
.name = "AUX C",
.domains = CNL_DISPLAY_AUX_C_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = CNL_DISP_PW_AUX_C,
},
{
.name = "AUX D",
.domains = CNL_DISPLAY_AUX_D_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = CNL_DISP_PW_AUX_D,
},
{
......@@ -2465,31 +2317,34 @@ static struct i915_power_well cnl_power_wells[] = {
{
.name = "power well 2",
.domains = CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_2,
.hsw.irq_pipe_mask = BIT(PIPE_B) | BIT(PIPE_C),
.hsw.has_vga = true,
.hsw.has_fuses = true,
},
{
.name = "DDI A IO power well",
.domains = CNL_DISPLAY_DDI_A_IO_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = CNL_DISP_PW_DDI_A,
},
{
.name = "DDI B IO power well",
.domains = CNL_DISPLAY_DDI_B_IO_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_B,
},
{
.name = "DDI C IO power well",
.domains = CNL_DISPLAY_DDI_C_IO_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_C,
},
{
.name = "DDI D IO power well",
.domains = CNL_DISPLAY_DDI_D_IO_POWER_DOMAINS,
.ops = &skl_power_well_ops,
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_D,
},
};
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或