x86/entry/64: Move the IST stacks into struct cpu_entry_area

The IST stacks are needed when an IST exception occurs and are accessed
before any kernel code at all runs.  Move them into struct cpu_entry_area.

The IST stacks are unlike the rest of cpu_entry_area: they're used even for
entries from kernel mode.  This means that they should be set up before we
load the final IDT.  Move cpu_entry_area setup to trap_init() for the boot
CPU and set it up for all possible CPUs at once in native_smp_prepare_cpus().
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Link: https://lkml.kernel.org/r/20171204150606.480598743@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

arch/x86/include/asm/fixmap.h

@@ -63,10 +63,22 @@ struct cpu_entry_area {
 	struct tss_struct tss;
 
 	char entry_trampoline[PAGE_SIZE];
+
+#ifdef CONFIG_X86_64
+	/*
+	 * Exception stacks used for IST entries.
+	 *
+	 * In the future, this should have a separate slot for each stack
+	 * with guard pages between them.
+	 */
+	char exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ];
+#endif
 };
 
 #define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
 
+extern void setup_cpu_entry_areas(void);
+
 /*
  * Here we define all the compile-time 'special' virtual
  * addresses. The point is to have a constant address at

arch/x86/kernel/cpu/common.c

@@ -466,24 +466,36 @@ void load_percpu_segment(int cpu)
 	load_stack_canary_segment();
 }
 
-static void set_percpu_fixmap_pages(int fixmap_index, void *ptr,
-				    int pages, pgprot_t prot)
-{
-	int i;
-
-	for (i = 0; i < pages; i++) {
-		__set_fixmap(fixmap_index - i,
-			     per_cpu_ptr_to_phys(ptr + i * PAGE_SIZE), prot);
-	}
-}
-
 #ifdef CONFIG_X86_32
 /* The 32-bit entry code needs to find cpu_entry_area. */
 DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
 #endif
 
+#ifdef CONFIG_X86_64
+/*
+ * Special IST stacks which the CPU switches to when it calls
+ * an IST-marked descriptor entry. Up to 7 stacks (hardware
+ * limit), all of them are 4K, except the debug stack which
+ * is 8K.
+ */
+static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
+	  [0 ... N_EXCEPTION_STACKS - 1]	= EXCEPTION_STKSZ,
+	  [DEBUG_STACK - 1]			= DEBUG_STKSZ
+};
+
+static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
+	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
+#endif
+
+static void __init
+set_percpu_fixmap_pages(int idx, void *ptr, int pages, pgprot_t prot)
+{
+	for ( ; pages; pages--, idx--, ptr += PAGE_SIZE)
+		__set_fixmap(idx, per_cpu_ptr_to_phys(ptr), prot);
+}
+
 /* Setup the fixmap mappings only once per-processor */
-static inline void setup_cpu_entry_area(int cpu)
+static void __init setup_cpu_entry_area(int cpu)
 {
 #ifdef CONFIG_X86_64
 	extern char _entry_trampoline[];
@@ -532,15 +544,31 @@ static inline void setup_cpu_entry_area(int cpu)
 				PAGE_KERNEL);
 
 #ifdef CONFIG_X86_32
-	this_cpu_write(cpu_entry_area, get_cpu_entry_area(cpu));
+	per_cpu(cpu_entry_area, cpu) = get_cpu_entry_area(cpu);
 #endif
 
 #ifdef CONFIG_X86_64
+	BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0);
+	BUILD_BUG_ON(sizeof(exception_stacks) !=
+		     sizeof(((struct cpu_entry_area *)0)->exception_stacks));
+	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, exception_stacks),
+				&per_cpu(exception_stacks, cpu),
+				sizeof(exception_stacks) / PAGE_SIZE,
+				PAGE_KERNEL);
+
 	__set_fixmap(get_cpu_entry_area_index(cpu, entry_trampoline),
 		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
 #endif
 }
 
+void __init setup_cpu_entry_areas(void)
+{
+	unsigned int cpu;
+
+	for_each_possible_cpu(cpu)
+		setup_cpu_entry_area(cpu);
+}
+
 /* Load the original GDT from the per-cpu structure */
 void load_direct_gdt(int cpu)
 {
@@ -1385,20 +1413,6 @@ DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
 DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
 EXPORT_PER_CPU_SYMBOL(__preempt_count);
 
-/*
- * Special IST stacks which the CPU switches to when it calls
- * an IST-marked descriptor entry. Up to 7 stacks (hardware
- * limit), all of them are 4K, except the debug stack which
- * is 8K.
- */
-static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
-	  [0 ... N_EXCEPTION_STACKS - 1]	= EXCEPTION_STKSZ,
-	  [DEBUG_STACK - 1]			= DEBUG_STKSZ
-};
-
-static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
-	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
-
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
@@ -1607,7 +1621,7 @@ void cpu_init(void)
 	 * set up and load the per-CPU TSS
 	 */
 	if (!oist->ist[0]) {
-		char *estacks = per_cpu(exception_stacks, cpu);
+		char *estacks = get_cpu_entry_area(cpu)->exception_stacks;
 
 		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
 			estacks += exception_stack_sizes[v];
@@ -1633,8 +1647,6 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, me);
 
-	setup_cpu_entry_area(cpu);
-
 	/*
 	 * Initialize the TSS.  sp0 points to the entry trampoline stack
 	 * regardless of what task is running.
@@ -1694,8 +1706,6 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, curr);
 
-	setup_cpu_entry_area(cpu);
-
 	/*
 	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
 	 * task never enters user mode.

arch/x86/kernel/traps.c

@@ -947,6 +947,9 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
 
 void __init trap_init(void)
 {
+	/* Init cpu_entry_area before IST entries are set up */
+	setup_cpu_entry_areas();
+
 	idt_setup_traps();
 
 	/*