提交 40ce972d 编写于 作者: D David Anders 提交者: Linus Torvalds

rtc: ds1307: comment and format cleanup

Do some cleanup of the comment sections as well as correct some
formatting issues reported by checkpatch.pl.
Signed-off-by: NDavid Anders <x0132446@ti.com>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Austin Boyle <Austin.Boyle@aviatnet.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 b24a7267
......@@ -20,7 +20,8 @@
/* We can't determine type by probing, but if we expect pre-Linux code
/*
* We can't determine type by probing, but if we expect pre-Linux code
* to have set the chip up as a clock (turning on the oscillator and
* setting the date and time), Linux can ignore the non-clock features.
* That's a natural job for a factory or repair bench.
......@@ -37,7 +38,7 @@ enum ds_type {
mcp7941x,
rx_8025,
last_ds_type /* always last */
// rs5c372 too? different address...
/* rs5c372 too? different address... */
};
......@@ -59,7 +60,8 @@ enum ds_type {
# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
#define DS1307_REG_YEAR 0x06 /* 00-99 */
/* Other registers (control, status, alarms, trickle charge, NVRAM, etc)
/*
* Other registers (control, status, alarms, trickle charge, NVRAM, etc)
* start at 7, and they differ a LOT. Only control and status matter for
* basic RTC date and time functionality; be careful using them.
*/
......@@ -366,6 +368,11 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
| DS1340_BIT_CENTURY;
break;
case mcp7941x:
/*
* these bits were cleared when preparing the date/time
* values and need to be set again before writing the
* buffer out to the device.
*/
buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST;
buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN;
break;
......@@ -411,7 +418,8 @@ static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
ds1307->regs[6], ds1307->regs[7],
ds1307->regs[8]);
/* report alarm time (ALARM1); assume 24 hour and day-of-month modes,
/*
* report alarm time (ALARM1); assume 24 hour and day-of-month modes,
* and that all four fields are checked matches
*/
t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
......@@ -439,7 +447,7 @@ static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
unsigned char *buf = ds1307->regs;
u8 control, status;
......@@ -602,8 +610,6 @@ static struct bin_attribute nvram = {
/*----------------------------------------------------------------------*/
static struct i2c_driver ds1307_driver;
static int __devinit ds1307_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -624,7 +630,8 @@ static int __devinit ds1307_probe(struct i2c_client *client,
&& !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
return -EIO;
if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL)))
ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL);
if (!ds1307)
return -ENOMEM;
i2c_set_clientdata(client, ds1307);
......@@ -659,7 +666,8 @@ static int __devinit ds1307_probe(struct i2c_client *client,
if (ds1307->regs[0] & DS1337_BIT_nEOSC)
ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
/* Using IRQ? Disable the square wave and both alarms.
/*
* Using IRQ? Disable the square wave and both alarms.
* For some variants, be sure alarms can trigger when we're
* running on Vbackup (BBSQI/BBSQW)
*/
......@@ -765,7 +773,8 @@ static int __devinit ds1307_probe(struct i2c_client *client,
goto exit_free;
}
/* minimal sanity checking; some chips (like DS1340) don't
/*
* minimal sanity checking; some chips (like DS1340) don't
* specify the extra bits as must-be-zero, but there are
* still a few values that are clearly out-of-range.
*/
......@@ -837,7 +846,8 @@ static int __devinit ds1307_probe(struct i2c_client *client,
switch (ds1307->type) {
case ds_1340:
case m41t00:
/* NOTE: ignores century bits; fix before deploying
/*
* NOTE: ignores century bits; fix before deploying
* systems that will run through year 2100.
*/
break;
......@@ -847,7 +857,8 @@ static int __devinit ds1307_probe(struct i2c_client *client,
if (!(tmp & DS1307_BIT_12HR))
break;
/* Be sure we're in 24 hour mode. Multi-master systems
/*
* Be sure we're in 24 hour mode. Multi-master systems
* take note...
*/
tmp = bcd2bin(tmp & 0x1f);
......@@ -902,7 +913,7 @@ static int __devinit ds1307_probe(struct i2c_client *client,
static int __devexit ds1307_remove(struct i2c_client *client)
{
struct ds1307 *ds1307 = i2c_get_clientdata(client);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) {
free_irq(client->irq, client);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册