提交 40478455 编写于 作者: V Ville Syrjälä 提交者: Jani Nikula

drm/i915: Allow user modes to exceed DVI 165MHz limit

In commit
 commit 6375b768
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Mon Mar 3 11:33:36 2014 +0200

    drm/i915: Reject >165MHz modes w/ DVI monitors

the driver started to filter out display modes which exceed the
single-link DVI 165Mz dotclock limits when the monitor doesn't report
itself as being HDMI compliant. The intent was to filter out all
EDID derived modes that require dual-link DVI to operate since we
don't support dual-link.

However the patch went a bit too far and also causes the driver to reject
such modes even when specified by the user. Normally we don't check the
sink limitations when setting a mode from the user. This allows the user
to specify any mode whether the sink reports to support it or not. This
can be useful since often the sinks support more modes than they report
in the EDID.

So relax the checks a bit, and apply the single-link DVI dotclock limit
only when filtering the mode list, and ignore the limit when setting
a user specified mode.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=72961Tested-by: NNicholas Vinson <nvinson@comcast.net>
Cc: stable@vger.kernel.org [3.14]
Reviewed-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
上级 a798c10f
...@@ -821,11 +821,11 @@ static void intel_disable_hdmi(struct intel_encoder *encoder) ...@@ -821,11 +821,11 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
} }
} }
static int hdmi_portclock_limit(struct intel_hdmi *hdmi) static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
{ {
struct drm_device *dev = intel_hdmi_to_dev(hdmi); struct drm_device *dev = intel_hdmi_to_dev(hdmi);
if (!hdmi->has_hdmi_sink || IS_G4X(dev)) if ((respect_dvi_limit && !hdmi->has_hdmi_sink) || IS_G4X(dev))
return 165000; return 165000;
else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8)
return 300000; return 300000;
...@@ -837,7 +837,8 @@ static enum drm_mode_status ...@@ -837,7 +837,8 @@ static enum drm_mode_status
intel_hdmi_mode_valid(struct drm_connector *connector, intel_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode) struct drm_display_mode *mode)
{ {
if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector))) if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector),
true))
return MODE_CLOCK_HIGH; return MODE_CLOCK_HIGH;
if (mode->clock < 20000) if (mode->clock < 20000)
return MODE_CLOCK_LOW; return MODE_CLOCK_LOW;
...@@ -879,7 +880,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, ...@@ -879,7 +880,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct drm_device *dev = encoder->base.dev; struct drm_device *dev = encoder->base.dev;
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
int clock_12bpc = pipe_config->adjusted_mode.crtc_clock * 3 / 2; int clock_12bpc = pipe_config->adjusted_mode.crtc_clock * 3 / 2;
int portclock_limit = hdmi_portclock_limit(intel_hdmi); int portclock_limit = hdmi_portclock_limit(intel_hdmi, false);
int desired_bpp; int desired_bpp;
if (intel_hdmi->color_range_auto) { if (intel_hdmi->color_range_auto) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册