提交 4010fe21 编写于 作者: C Christian Lamparter 提交者: John W. Linville

p54usb: add USBIDs for two more p54usb devices

This patch adds USBIDs for:
	- DrayTek Vigor 530
	- Zoom 4410a

It also adds a note about Gemtek WUBI-100GW
and SparkLAN WL-682 USBID conflict [WUBI-100GW
is a ISL3886+NET2280 (LM86 firmare) solution,
whereas WL-682 is a ISL3887 (LM87 firmware)]
device.

Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows>

Cc: <stable@vger.kernel.org>
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 1474a898
......@@ -47,6 +47,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */
{USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
{USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */
{USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
{USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
{USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */
......@@ -82,6 +83,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
{USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
{USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
{USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
......@@ -102,6 +104,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
/* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */
{USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
{USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册