提交 4003dff4 编写于 作者: R Rick Koch 提交者: Dmitry Torokhov

Input: add driver for Touchright serial touchscreens

Signed-off-by: NRick Koch <n1gp@hotmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
上级 ee479999
......@@ -120,4 +120,16 @@ config TOUCHSCREEN_PENMOUNT
To compile this driver as a module, choose M here: the
module will be called penmount.
config TOUCHSCREEN_TOUCHRIGHT
tristate "Touchright serial touchscreen"
select SERIO
help
Say Y here if you have a Touchright serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called touchright.
endif
......@@ -13,3 +13,4 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
/*
* Touchright serial touchscreen driver
*
* Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
*
* Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
* Copyright (c) 2004 Vojtech Pavlik
* and Dan Streetman <ddstreet@ieee.org>
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Touchright serial touchscreen driver"
MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Definitions & global arrays.
*/
#define TR_FORMAT_TOUCH_BIT 0x01
#define TR_FORMAT_STATUS_BYTE 0x40
#define TR_FORMAT_STATUS_MASK ~TR_FORMAT_TOUCH_BIT
#define TR_LENGTH 5
#define TR_MIN_XC 0
#define TR_MAX_XC 0x1ff
#define TR_MIN_YC 0
#define TR_MAX_YC 0x1ff
/*
* Per-touchscreen data.
*/
struct tr {
struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[TR_LENGTH];
char phys[32];
};
static irqreturn_t tr_interrupt(struct serio *serio,
unsigned char data, unsigned int flags, struct pt_regs *regs)
{
struct tr *tr = serio_get_drvdata(serio);
struct input_dev *dev = tr->dev;
tr->data[tr->idx] = data;
if ((tr->data[0] & TR_FORMAT_STATUS_MASK) == TR_FORMAT_STATUS_BYTE) {
if (++tr->idx == TR_LENGTH) {
input_regs(dev, regs);
input_report_abs(dev, ABS_X,
(tr->data[1] << 5) | (tr->data[2] >> 1));
input_report_abs(dev, ABS_Y,
(tr->data[3] << 5) | (tr->data[4] >> 1));
input_report_key(dev, BTN_TOUCH,
tr->data[0] & TR_FORMAT_TOUCH_BIT);
input_sync(dev);
tr->idx = 0;
}
}
return IRQ_HANDLED;
}
/*
* tr_disconnect() is the opposite of tr_connect()
*/
static void tr_disconnect(struct serio *serio)
{
struct tr *tr = serio_get_drvdata(serio);
input_get_device(tr->dev);
input_unregister_device(tr->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_put_device(tr->dev);
kfree(tr);
}
/*
* tr_connect() is the routine that is called when someone adds a
* new serio device that supports the Touchright protocol and registers it as
* an input device.
*/
static int tr_connect(struct serio *serio, struct serio_driver *drv)
{
struct tr *tr;
struct input_dev *input_dev;
int err;
tr = kzalloc(sizeof(struct tr), GFP_KERNEL);
input_dev = input_allocate_device();
if (!tr || !input_dev) {
err = -ENOMEM;
goto fail1;
}
tr->serio = serio;
tr->dev = input_dev;
snprintf(tr->phys, sizeof(tr->phys), "%s/input0", serio->phys);
input_dev->private = tr;
input_dev->name = "Touchright Serial TouchScreen";
input_dev->phys = tr->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_TOUCHRIGHT;
input_dev->id.product = 0;
input_dev->id.version = 0x0100;
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
input_set_abs_params(tr->dev, ABS_X, TR_MIN_XC, TR_MAX_XC, 0, 0);
input_set_abs_params(tr->dev, ABS_Y, TR_MIN_YC, TR_MAX_YC, 0, 0);
serio_set_drvdata(serio, tr);
err = serio_open(serio, drv);
if (err)
goto fail2;
err = input_register_device(tr->dev);
if (err)
goto fail3;
return 0;
fail3: serio_close(serio);
fail2: serio_set_drvdata(serio, NULL);
fail1: input_free_device(input_dev);
kfree(tr);
return err;
}
/*
* The serio driver structure.
*/
static struct serio_device_id tr_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_TOUCHRIGHT,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, tr_serio_ids);
static struct serio_driver tr_drv = {
.driver = {
.name = "touchright",
},
.description = DRIVER_DESC,
.id_table = tr_serio_ids,
.interrupt = tr_interrupt,
.connect = tr_connect,
.disconnect = tr_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init tr_init(void)
{
serio_register_driver(&tr_drv);
return 0;
}
static void __exit tr_exit(void)
{
serio_unregister_driver(&tr_drv);
}
module_init(tr_init);
module_exit(tr_exit);
......@@ -218,5 +218,6 @@ static inline void serio_unpin_driver(struct serio *serio)
#define SERIO_ELO 0x29
#define SERIO_MICROTOUCH 0x30
#define SERIO_PENMOUNT 0x31
#define SERIO_TOUCHRIGHT 0x32
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册