提交 3ff1ec27 编写于 作者: M Mark Brown

ASoC: wm2000: Always use a 4s timeout for the firmware

Rather than having varying timeouts depending on the transition always
use a 4s timeout. This provides better diagnostics for clocking errors
and ensures compatibility with current calibration firmwares.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 90c6ce0d
......@@ -99,8 +99,9 @@ static void wm2000_reset(struct wm2000_priv *wm2000)
}
static int wm2000_poll_bit(struct i2c_client *i2c,
unsigned int reg, u8 mask, int timeout)
unsigned int reg, u8 mask)
{
int timeout = 4000;
int val;
val = wm2000_read(i2c, reg);
......@@ -119,7 +120,7 @@ static int wm2000_poll_bit(struct i2c_client *i2c,
static int wm2000_power_up(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
int ret, timeout;
int ret;
BUG_ON(wm2000->anc_mode != ANC_OFF);
......@@ -140,13 +141,13 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
/* Wait for ANC engine to become ready */
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE, 1)) {
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "ANC engine failed to reset\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_BOOT_COMPLETE, 1)) {
WM2000_STATUS_BOOT_COMPLETE)) {
dev_err(&i2c->dev, "ANC engine failed to initialise\n");
return -ETIMEDOUT;
}
......@@ -173,16 +174,13 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
dev_dbg(&i2c->dev, "Download complete\n");
if (analogue) {
timeout = 248;
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
} else {
timeout = 10;
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
......@@ -201,9 +199,8 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
dev_err(&i2c->dev, "Timed out waiting for device after %dms\n",
timeout * 10);
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for device\n");
return -ETIMEDOUT;
}
......@@ -218,28 +215,25 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
static int wm2000_power_down(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
int timeout;
if (analogue) {
timeout = 248;
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_POWER_DOWN);
} else {
timeout = 10;
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_POWER_DOWN);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_POWER_DOWN_COMPLETE, timeout)) {
WM2000_STATUS_POWER_DOWN_COMPLETE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE, 1)) {
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
......@@ -268,13 +262,13 @@ static int wm2000_enter_bypass(struct i2c_client *i2c, int analogue)
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_ANC_DISABLED, 10)) {
WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE, 1)) {
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
......@@ -311,7 +305,7 @@ static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue)
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE, 10)) {
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
......@@ -325,38 +319,32 @@ static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue)
static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
int timeout;
BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
if (analogue) {
timeout = 248;
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
} else {
timeout = 10;
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_ANC_DISABLED, timeout)) {
WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev,
"Timed out waiting for ANC disable after 1ms\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE,
1)) {
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev,
"Timed out waiting for standby after %dms\n",
timeout * 10);
"Timed out waiting for standby\n");
return -ETIMEDOUT;
}
......@@ -374,23 +362,19 @@ static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
int timeout;
BUG_ON(wm2000->anc_mode != ANC_STANDBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
if (analogue) {
timeout = 248;
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
} else {
timeout = 10;
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
......@@ -400,9 +384,8 @@ static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE after %dms\n",
timeout * 10);
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册