提交 3f3e7313 编写于 作者: U Uwe Koziolek 提交者: Jeff Garzik

[PATCH] sata_sis: support SiS966/966L

The SiS966/966L has different PCI-IDs for native mode and AHCI mode.
The SiS966 supports four SATA ports only in native mode.

Added additional PCI-ID 0x0183 for SiS965/965L.

this patch is based on the code from David Wang from SiS Corporation published on SiS Website.
Signed-off-by: NUwe Koziolek <uwe.koziolek@gmx.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 eaefd5fb
...@@ -42,7 +42,7 @@ ...@@ -42,7 +42,7 @@
#include <linux/libata.h> #include <linux/libata.h>
#define DRV_NAME "sata_sis" #define DRV_NAME "sata_sis"
#define DRV_VERSION "0.6" #define DRV_VERSION "0.7"
enum { enum {
sis_180 = 0, sis_180 = 0,
...@@ -67,9 +67,12 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg); ...@@ -67,9 +67,12 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static const struct pci_device_id sis_pci_tbl[] = { static const struct pci_device_id sis_pci_tbl[] = {
{ PCI_VDEVICE(SI, 0x180), sis_180 }, { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */
{ PCI_VDEVICE(SI, 0x181), sis_180 }, { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
{ PCI_VDEVICE(SI, 0x182), sis_180 }, { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
{ PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
{ PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */
{ PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */
{ } /* terminate list */ { } /* terminate list */
}; };
...@@ -142,24 +145,32 @@ MODULE_LICENSE("GPL"); ...@@ -142,24 +145,32 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sis_pci_tbl); MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
MODULE_VERSION(DRV_VERSION); MODULE_VERSION(DRV_VERSION);
static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, struct pci_dev *pdev)
{ {
unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
if (port_no) { if (port_no) {
if (device == 0x182) switch (pdev->device) {
addr += SIS182_SATA1_OFS; case 0x0180:
else case 0x0181:
addr += SIS180_SATA1_OFS; addr += SIS180_SATA1_OFS;
break;
case 0x0182:
case 0x0183:
case 0x1182:
case 0x1183:
addr += SIS182_SATA1_OFS;
break;
}
} }
return addr; return addr;
} }
static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
{ {
struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev);
u32 val, val2 = 0; u32 val, val2 = 0;
u8 pmr; u8 pmr;
...@@ -170,7 +181,8 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) ...@@ -170,7 +181,8 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
pci_read_config_dword(pdev, cfg_addr, &val); pci_read_config_dword(pdev, cfg_addr, &val);
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
pci_read_config_dword(pdev, cfg_addr+0x10, &val2); pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */ return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */
...@@ -179,7 +191,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) ...@@ -179,7 +191,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
{ {
struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev);
u8 pmr; u8 pmr;
if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */
...@@ -189,7 +201,8 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) ...@@ -189,7 +201,8 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
pci_write_config_dword(pdev, cfg_addr, val); pci_write_config_dword(pdev, cfg_addr, val);
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
pci_write_config_dword(pdev, cfg_addr+0x10, val); pci_write_config_dword(pdev, cfg_addr+0x10, val);
} }
...@@ -209,7 +222,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) ...@@ -209,7 +222,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); val = inl(ap->ioaddr.scr_addr + (sc_reg * 4));
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
return (val | val2) & 0xfffffffb; return (val | val2) & 0xfffffffb;
...@@ -229,7 +243,8 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) ...@@ -229,7 +243,8 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
sis_scr_cfg_write(ap, sc_reg, val); sis_scr_cfg_write(ap, sc_reg, val);
else { else {
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
} }
} }
...@@ -243,7 +258,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ...@@ -243,7 +258,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi }; struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
int pci_dev_busy = 0; int pci_dev_busy = 0;
u8 pmr; u8 pmr;
u8 port2_start; u8 port2_start = 0x20;
if (!printed_version++) if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
...@@ -282,28 +297,42 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ...@@ -282,28 +297,42 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
} }
pci_read_config_byte(pdev, SIS_PMR, &pmr); pci_read_config_byte(pdev, SIS_PMR, &pmr);
if (ent->device != 0x182) { switch (ent->device) {
case 0x0180:
case 0x0181:
if ((pmr & SIS_PMR_COMBINED) == 0) { if ((pmr & SIS_PMR_COMBINED) == 0) {
dev_printk(KERN_INFO, &pdev->dev, dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181/964 chipset in SATA mode\n"); "Detected SiS 180/181/964 chipset in SATA mode\n");
port2_start = 64; port2_start = 64;
} } else {
else {
dev_printk(KERN_INFO, &pdev->dev, dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n"); "Detected SiS 180/181 chipset in combined mode\n");
port2_start=0; port2_start=0;
pi.flags |= ATA_FLAG_SLAVE_POSS; pi.flags |= ATA_FLAG_SLAVE_POSS;
} }
} break;
else {
case 0x0182:
case 0x0183:
pci_read_config_dword ( pdev, 0x6C, &val); pci_read_config_dword ( pdev, 0x6C, &val);
if (val & (1L << 31)) { if (val & (1L << 31)) {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n"); dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
pi.flags |= ATA_FLAG_SLAVE_POSS; pi.flags |= ATA_FLAG_SLAVE_POSS;
} } else {
else
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n"); dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
port2_start = 0x20; }
break;
case 0x1182:
case 0x1183:
pci_read_config_dword(pdev, 0x64, &val);
if (val & 0x10000000) {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n");
} else {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
break;
} }
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册