net: pch_gbe: Remove init_hw HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the init_hw abstraction in favor of inlining its
single implementation (pch_gbe_plat_init_hw) into its single caller
(pch_gbe_reset).
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h

@@ -331,11 +331,9 @@ struct pch_gbe_hw;
 /**
  * struct  pch_gbe_functions - HAL APi function pointer
  * @get_bus_info:	for pch_gbe_hal_get_bus_info
- * @init_hw:		for pch_gbe_hal_init_hw
  */
 struct pch_gbe_functions {
 	void (*get_bus_info) (struct pch_gbe_hw *);
-	s32 (*init_hw) (struct pch_gbe_hw *);
 };
 
 /**

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c

@@ -57,35 +57,8 @@ static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw)
 	hw->bus.width = pch_gbe_bus_width_pcie_x1;
 }
 
-/**
- * pch_gbe_plat_init_hw - Initialize hardware
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:		Successfully
- *	Negative value:	Failed-EBUSY
- */
-static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
-{
-	s32 ret_val;
-
-	ret_val = pch_gbe_phy_get_id(hw);
-	if (ret_val) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
-		return ret_val;
-	}
-	pch_gbe_phy_init_setting(hw);
-	/* Setup Mac interface option RGMII */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
-	pch_gbe_phy_set_rgmii(hw);
-#endif
-	return ret_val;
-}
-
 static const struct pch_gbe_functions pch_gbe_ops = {
 	.get_bus_info      = pch_gbe_plat_get_bus_info,
-	.init_hw           = pch_gbe_plat_init_hw,
 };
 
 /**
@@ -133,21 +106,3 @@ void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
 	}
 	hw->func->get_bus_info(hw);
 }
-
-/**
- * pch_gbe_hal_init_hw - Initialize hardware
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->init_hw) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return -ENOSYS;
-	}
-	return hw->func->init_hw(hw);
-}

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h

@@ -23,6 +23,5 @@
 
 s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
 void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
-s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
 
 #endif

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c

@@ -760,14 +760,25 @@ void pch_gbe_reinit_locked(struct pch_gbe_adapter *adapter)
 void pch_gbe_reset(struct pch_gbe_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct pch_gbe_hw *hw = &adapter->hw;
+	s32 ret_val;
 
-	pch_gbe_mac_reset_hw(&adapter->hw);
+	pch_gbe_mac_reset_hw(hw);
 	/* reprogram multicast address register after reset */
 	pch_gbe_set_multi(netdev);
 	/* Setup the receive address. */
-	pch_gbe_mac_init_rx_addrs(&adapter->hw, PCH_GBE_MAR_ENTRIES);
-	if (pch_gbe_hal_init_hw(&adapter->hw))
-		netdev_err(netdev, "Hardware Error\n");
+	pch_gbe_mac_init_rx_addrs(hw, PCH_GBE_MAR_ENTRIES);
+
+	ret_val = pch_gbe_phy_get_id(hw);
+	if (ret_val) {
+		netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
+		return;
+	}
+	pch_gbe_phy_init_setting(hw);
+	/* Setup Mac interface option RGMII */
+#ifdef PCH_GBE_MAC_IFOP_RGMII
+	pch_gbe_phy_set_rgmii(hw);
+#endif
 }
 
 /**