Input: add support for mma8450 accelerometer

Signed-off-by: NSammy He <r62914@freescale.com>
Signed-off-by: NEric Miao <eric.miao@linaro.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

drivers/input/misc/Kconfig

@@ -100,6 +100,17 @@ config INPUT_MAX8925_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called max8925_onkey.
 
+config INPUT_MMA8450
+	tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
+	depends on I2C
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support Freescale's MMA8450 Accelerometer
+	  through I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mma8450.
+
 config INPUT_APANEL
 	tristate "Fujitsu Lifebook Application Panel buttons"
 	depends on X86 && I2C && LEDS_CLASS

drivers/input/misc/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
+obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
@@ -45,4 +46,3 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
-

drivers/input/misc/mma8450.c

+/*
+ *  Driver for Freescale's 3-Axis Accelerometer MMA8450
+ *
+ *  Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input-polldev.h>
+
+#define MMA8450_DRV_NAME	"mma8450"
+
+#define MODE_CHANGE_DELAY_MS	100
+#define POLL_INTERVAL		100
+#define POLL_INTERVAL_MAX	500
+
+/* register definitions */
+#define MMA8450_STATUS		0x00
+#define MMA8450_STATUS_ZXYDR	0x08
+
+#define MMA8450_OUT_X8		0x01
+#define MMA8450_OUT_Y8		0x02
+#define MMA8450_OUT_Z8		0x03
+
+#define MMA8450_OUT_X_LSB	0x05
+#define MMA8450_OUT_X_MSB	0x06
+#define MMA8450_OUT_Y_LSB	0x07
+#define MMA8450_OUT_Y_MSB	0x08
+#define MMA8450_OUT_Z_LSB	0x09
+#define MMA8450_OUT_Z_MSB	0x0a
+
+#define MMA8450_XYZ_DATA_CFG	0x16
+
+#define MMA8450_CTRL_REG1	0x38
+#define MMA8450_CTRL_REG2	0x39
+
+/* mma8450 status */
+struct mma8450 {
+	struct i2c_client	*client;
+	struct input_polled_dev	*idev;
+};
+
+static int mma8450_read(struct mma8450 *m, unsigned off)
+{
+	struct i2c_client *c = m->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(c, off);
+	if (ret < 0)
+		dev_err(&c->dev,
+			"failed to read register 0x%02x, error %d\n",
+			off, ret);
+
+	return ret;
+}
+
+static int mma8450_write(struct mma8450 *m, unsigned off, u8 v)
+{
+	struct i2c_client *c = m->client;
+	int error;
+
+	error = i2c_smbus_write_byte_data(c, off, v);
+	if (error < 0) {
+		dev_err(&c->dev,
+			"failed to write to register 0x%02x, error %d\n",
+			off, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int mma8450_read_xyz(struct mma8450 *m, int *x, int *y, int *z)
+{
+	struct i2c_client *c = m->client;
+	u8 buff[6];
+	int err;
+
+	err = i2c_smbus_read_i2c_block_data(c, MMA8450_OUT_X_LSB, 6, buff);
+	if (err < 0) {
+		dev_err(&c->dev,
+			"failed to read block data at 0x%02x, error %d\n",
+			MMA8450_OUT_X_LSB, err);
+		return err;
+	}
+
+	*x = ((buff[1] << 4) & 0xff0) | (buff[0] & 0xf);
+	*y = ((buff[3] << 4) & 0xff0) | (buff[2] & 0xf);
+	*z = ((buff[5] << 4) & 0xff0) | (buff[4] & 0xf);
+
+	return 0;
+}
+
+static void mma8450_poll(struct input_polled_dev *dev)
+{
+	struct mma8450 *m = dev->private;
+	int x, y, z;
+	int ret;
+	int err;
+
+	ret = mma8450_read(m, MMA8450_STATUS);
+	if (ret < 0)
+		return;
+
+	if (!(ret & MMA8450_STATUS_ZXYDR))
+		return;
+
+	err = mma8450_read_xyz(m, &x, &y, &z);
+	if (err)
+		return;
+
+	input_report_abs(dev->input, ABS_X, x);
+	input_report_abs(dev->input, ABS_Y, y);
+	input_report_abs(dev->input, ABS_Z, z);
+	input_sync(dev->input);
+}
+
+/* Initialize the MMA8450 chip */
+static void mma8450_open(struct input_polled_dev *dev)
+{
+	struct mma8450 *m = dev->private;
+	int err;
+
+	/* enable all events from X/Y/Z, no FIFO */
+	err = mma8450_write(m, MMA8450_XYZ_DATA_CFG, 0x07);
+	if (err)
+		return;
+
+	/*
+	 * Sleep mode poll rate - 50Hz
+	 * System output data rate - 400Hz
+	 * Full scale selection - Active, +/- 2G
+	 */
+	err = mma8450_write(m, MMA8450_CTRL_REG1, 0x01);
+	if (err < 0)
+		return;
+
+	msleep(MODE_CHANGE_DELAY_MS);
+}
+
+static void mma8450_close(struct input_polled_dev *dev)
+{
+	struct mma8450 *m = dev->private;
+
+	mma8450_write(m, MMA8450_CTRL_REG1, 0x00);
+	mma8450_write(m, MMA8450_CTRL_REG2, 0x01);
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int __devinit mma8450_probe(struct i2c_client *c,
+				   const struct i2c_device_id *id)
+{
+	struct input_polled_dev *idev;
+	struct mma8450 *m;
+	int err;
+
+	m = kzalloc(sizeof(struct mma8450), GFP_KERNEL);
+	idev = input_allocate_polled_device();
+	if (!m || !idev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	m->client = c;
+	m->idev = idev;
+
+	idev->private		= m;
+	idev->input->name	= MMA8450_DRV_NAME;
+	idev->input->id.bustype	= BUS_I2C;
+	idev->poll		= mma8450_poll;
+	idev->poll_interval	= POLL_INTERVAL;
+	idev->poll_interval_max	= POLL_INTERVAL_MAX;
+	idev->open		= mma8450_open;
+	idev->close		= mma8450_close;
+
+	__set_bit(EV_ABS, idev->input->evbit);
+	input_set_abs_params(idev->input, ABS_X, -2048, 2047, 32, 32);
+	input_set_abs_params(idev->input, ABS_Y, -2048, 2047, 32, 32);
+	input_set_abs_params(idev->input, ABS_Z, -2048, 2047, 32, 32);
+
+	err = input_register_polled_device(idev);
+	if (err) {
+		dev_err(&c->dev, "failed to register polled input device\n");
+		goto err_free_mem;
+	}
+
+	return 0;
+
+err_free_mem:
+	input_free_polled_device(idev);
+	kfree(m);
+	return err;
+}
+
+static int __devexit mma8450_remove(struct i2c_client *c)
+{
+	struct mma8450 *m = i2c_get_clientdata(c);
+	struct input_polled_dev *idev = m->idev;
+
+	input_unregister_polled_device(idev);
+	input_free_polled_device(idev);
+	kfree(m);
+
+	return 0;
+}
+
+static const struct i2c_device_id mma8450_id[] = {
+	{ MMA8450_DRV_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, mma8450_id);
+
+static struct i2c_driver mma8450_driver = {
+	.driver = {
+		.name	= MMA8450_DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mma8450_probe,
+	.remove		= __devexit_p(mma8450_remove),
+	.id_table	= mma8450_id,
+};
+
+static int __init mma8450_init(void)
+{
+	return i2c_add_driver(&mma8450_driver);
+}
+module_init(mma8450_init);
+
+static void __exit mma8450_exit(void)
+{
+	i2c_del_driver(&mma8450_driver);
+}
+module_exit(mma8450_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MMA8450 3-Axis Accelerometer Driver");
+MODULE_LICENSE("GPL");