提交 3ead1ba3 编写于 作者: M Matt Gomboc 提交者: Mauro Carvalho Chehab

[media] cx231xx : Add support for OTG102 aka EZGrabber2

Thanks for the response, I have done as you suggested.
Below is an updated patch for the OTG102 device against http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx, kernel version 3.8.
With further testing it appears the extra clauses in cx231xx-cards.c were not necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so those have been also been removed.
Signed-off-by: NMatt Gomboc <gomboc0@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 a2262508
......@@ -357,6 +357,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
case CX231XX_BOARD_OTG102:
if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
FLD_PWRDN_ENABLE_PLL)) {
......@@ -1720,6 +1721,7 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
case CX231XX_BOARD_CNXT_RDU_250:
case CX231XX_BOARD_CNXT_VIDEO_GRABBER:
case CX231XX_BOARD_HAUPPAUGE_EXETER:
case CX231XX_BOARD_OTG102:
func_mode = 0x03;
break;
case CX231XX_BOARD_CNXT_RDE_253S:
......
......@@ -634,6 +634,39 @@ struct cx231xx_board cx231xx_boards[] = {
.gpio = NULL,
} },
},
[CX231XX_BOARD_OTG102] = {
.name = "Geniatech OTG102",
.tuner_type = TUNER_ABSENT,
.decoder = CX231XX_AVDECODER,
.output_mode = OUT_MODE_VIP11,
.ctl_pin_status_mask = 0xFFFFFFC4,
.agc_analog_digital_select_gpio = 0x0c,
/* According with PV CxPlrCAP.inf file */
.gpio_pin_status_mask = 0x4001000,
.norm = V4L2_STD_NTSC,
.no_alt_vanc = 1,
.external_av = 1,
.dont_use_port_3 = 1,
/*.has_417 = 1, */
/* This board is believed to have a hardware encoding chip
* supporting mpeg1/2/4, but as the 417 is apparently not
* working for the reference board it is not here either. */
.input = {{
.type = CX231XX_VMUX_COMPOSITE1,
.vmux = CX231XX_VIN_2_1,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = NULL,
}, {
.type = CX231XX_VMUX_SVIDEO,
.vmux = CX231XX_VIN_1_1 |
(CX231XX_VIN_1_2 << 8) |
CX25840_SVIDEO_ON,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = NULL,
}
},
},
};
const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
......@@ -675,6 +708,8 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_ICONBIT_U100},
{USB_DEVICE(0x0fd9, 0x0037),
.driver_info = CX231XX_BOARD_ELGATO_VIDEO_CAPTURE_V2},
{USB_DEVICE(0x1f4d, 0x0102),
.driver_info = CX231XX_BOARD_OTG102},
{},
};
......
......@@ -71,6 +71,7 @@
#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL 14
#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC 15
#define CX231XX_BOARD_ELGATO_VIDEO_CAPTURE_V2 16
#define CX231XX_BOARD_OTG102 17
/* Limits minimum and default number of buffers */
#define CX231XX_MIN_BUF 4
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册