提交 3e5b0851 编写于 作者: S Sebastian Reichel 提交者: Dmitry Torokhov

Input: add a driver for PWM controllable vibrators

Provide a simple driver for PWM controllable vibrators.
It will be used by Motorola Droid 4.
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
上级 1bf21b33
* PWM vibrator device tree bindings
Registers a PWM device as vibrator. It is expected, that the vibrator's
strength increases based on the duty cycle of the enable PWM channel
(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
The binding supports an optional direction PWM channel, that can be
driven at fixed duty cycle. If available this is can be used to increase
the vibration effect of some devices.
Required properties:
- compatible: should contain "pwm-vibrator"
- pwm-names: Should contain "enable" and optionally "direction"
- pwms: Should contain a PWM handle for each entry in pwm-names
Optional properties:
- vcc-supply: Phandle for the regulator supplying power
- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
nanoseconds, defaults to 50% of the channel's
period.
Example from Motorola Droid 4:
&omap4_pmx_core {
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
>;
};
vibrator_enable_pin: pinmux_vibrator_enable_pin {
pinctrl-single,pins = <
OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
>;
};
};
/ {
pwm8: dmtimer-pwm {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_direction_pin>;
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
ti,timers = <&timer8>;
ti,clock-source = <0x01>;
};
pwm9: dmtimer-pwm {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_enable_pin>;
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
ti,timers = <&timer9>;
ti,clock-source = <0x01>;
};
vibrator {
compatible = "pwm-vibrator";
pwms = <&pwm8 0 1000000000 0>,
<&pwm9 0 1000000000 0>;
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <1000000000>;
};
};
......@@ -581,6 +581,18 @@ config INPUT_PWM_BEEPER
To compile this driver as a module, choose M here: the module will be
called pwm-beeper.
config INPUT_PWM_VIBRA
tristate "PWM vibrator support"
depends on PWM
select INPUT_FF_MEMLESS
help
Say Y here to get support for PWM based vibrator devices.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called pwm-vibra.
config INPUT_RK805_PWRKEY
tristate "Rockchip RK805 PMIC power key support"
depends on MFD_RK808
......
......@@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o
obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
......
/*
* PWM vibrator driver
*
* Copyright (C) 2017 Collabora Ltd.
*
* Based on previous work from:
* Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com>
*
* Based on PWM beeper driver:
* Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
struct pwm_vibrator {
struct input_dev *input;
struct pwm_device *pwm;
struct pwm_device *pwm_dir;
struct regulator *vcc;
struct work_struct play_work;
u16 level;
u32 direction_duty_cycle;
};
static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
{
struct device *pdev = vibrator->input->dev.parent;
struct pwm_state state;
int err;
err = regulator_enable(vibrator->vcc);
if (err) {
dev_err(pdev, "failed to enable regulator: %d", err);
return err;
}
pwm_get_state(vibrator->pwm, &state);
pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
state.enabled = true;
err = pwm_apply_state(vibrator->pwm, &state);
if (err) {
dev_err(pdev, "failed to apply pwm state: %d", err);
return err;
}
if (vibrator->pwm_dir) {
pwm_get_state(vibrator->pwm_dir, &state);
state.duty_cycle = vibrator->direction_duty_cycle;
state.enabled = true;
err = pwm_apply_state(vibrator->pwm_dir, &state);
if (err) {
dev_err(pdev, "failed to apply dir-pwm state: %d", err);
pwm_disable(vibrator->pwm);
return err;
}
}
return 0;
}
static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
{
regulator_disable(vibrator->vcc);
if (vibrator->pwm_dir)
pwm_disable(vibrator->pwm_dir);
pwm_disable(vibrator->pwm);
}
static void pwm_vibrator_play_work(struct work_struct *work)
{
struct pwm_vibrator *vibrator = container_of(work,
struct pwm_vibrator, play_work);
if (vibrator->level)
pwm_vibrator_start(vibrator);
else
pwm_vibrator_stop(vibrator);
}
static int pwm_vibrator_play_effect(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct pwm_vibrator *vibrator = input_get_drvdata(dev);
vibrator->level = effect->u.rumble.strong_magnitude;
if (!vibrator->level)
vibrator->level = effect->u.rumble.weak_magnitude;
schedule_work(&vibrator->play_work);
return 0;
}
static void pwm_vibrator_close(struct input_dev *input)
{
struct pwm_vibrator *vibrator = input_get_drvdata(input);
cancel_work_sync(&vibrator->play_work);
pwm_vibrator_stop(vibrator);
}
static int pwm_vibrator_probe(struct platform_device *pdev)
{
struct pwm_vibrator *vibrator;
struct pwm_state state;
int err;
vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
if (!vibrator)
return -ENOMEM;
vibrator->input = devm_input_allocate_device(&pdev->dev);
if (!vibrator->input)
return -ENOMEM;
vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
err = PTR_ERR_OR_ZERO(vibrator->vcc);
if (err) {
if (err != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to request regulator: %d",
err);
return err;
}
vibrator->pwm = devm_pwm_get(&pdev->dev, "enable");
err = PTR_ERR_OR_ZERO(vibrator->pwm);
if (err) {
if (err != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to request main pwm: %d",
err);
return err;
}
INIT_WORK(&vibrator->play_work, pwm_vibrator_play_work);
/* Sync up PWM state and ensure it is off. */
pwm_init_state(vibrator->pwm, &state);
state.enabled = false;
err = pwm_apply_state(vibrator->pwm, &state);
if (err) {
dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
err);
return err;
}
vibrator->pwm_dir = devm_pwm_get(&pdev->dev, "direction");
err = PTR_ERR_OR_ZERO(vibrator->pwm_dir);
switch (err) {
case 0:
/* Sync up PWM state and ensure it is off. */
pwm_init_state(vibrator->pwm_dir, &state);
state.enabled = false;
err = pwm_apply_state(vibrator->pwm_dir, &state);
if (err) {
dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
err);
return err;
}
vibrator->direction_duty_cycle =
pwm_get_period(vibrator->pwm_dir) / 2;
device_property_read_u32(&pdev->dev, "direction-duty-cycle-ns",
&vibrator->direction_duty_cycle);
break;
case -ENODATA:
/* Direction PWM is optional */
vibrator->pwm_dir = NULL;
break;
default:
dev_err(&pdev->dev, "Failed to request direction pwm: %d", err);
/* Fall through */
case -EPROBE_DEFER:
return err;
}
vibrator->input->name = "pwm-vibrator";
vibrator->input->id.bustype = BUS_HOST;
vibrator->input->dev.parent = &pdev->dev;
vibrator->input->close = pwm_vibrator_close;
input_set_drvdata(vibrator->input, vibrator);
input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
err = input_ff_create_memless(vibrator->input, NULL,
pwm_vibrator_play_effect);
if (err) {
dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
return err;
}
err = input_register_device(vibrator->input);
if (err) {
dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
return err;
}
platform_set_drvdata(pdev, vibrator);
return 0;
}
static int __maybe_unused pwm_vibrator_suspend(struct device *dev)
{
struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
cancel_work_sync(&vibrator->play_work);
if (vibrator->level)
pwm_vibrator_stop(vibrator);
return 0;
}
static int __maybe_unused pwm_vibrator_resume(struct device *dev)
{
struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
if (vibrator->level)
pwm_vibrator_start(vibrator);
return 0;
}
static SIMPLE_DEV_PM_OPS(pwm_vibrator_pm_ops,
pwm_vibrator_suspend, pwm_vibrator_resume);
#ifdef CONFIG_OF
static const struct of_device_id pwm_vibra_dt_match_table[] = {
{ .compatible = "pwm-vibrator" },
{},
};
MODULE_DEVICE_TABLE(of, pwm_vibra_dt_match_table);
#endif
static struct platform_driver pwm_vibrator_driver = {
.probe = pwm_vibrator_probe,
.driver = {
.name = "pwm-vibrator",
.pm = &pwm_vibrator_pm_ops,
.of_match_table = of_match_ptr(pwm_vibra_dt_match_table),
},
};
module_platform_driver(pwm_vibrator_driver);
MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
MODULE_DESCRIPTION("PWM vibrator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pwm-vibrator");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册