PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823

Commit 15bed0f2 added a quirk for the e823 Ricoh card reader to lower the
base frequency.  However, the quirk first checks to see if the proprietary
MMC controller is disabled, and returns if so.  On some devices, such as the
Lenovo X220, the MMC controller is already disabled by firmware it seems,
but the frequency change is still needed so sdhci-pci can talk to the cards.
Since the MMC controller is disabled, the frequency fixup was never being run
on these machines.

This moves the e823 check above the MMC controller check so that it always
gets run.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=722509Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

drivers/pci/quirks.c

@@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 	/* disable must be done via function #0 */
 	if (PCI_FUNC(dev->devfn))
 		return;
-
-	pci_read_config_byte(dev, 0xCB, &disable);
-
-	if (disable & 0x02)
-		return;
-
-	pci_read_config_byte(dev, 0xCA, &write_enable);
-	pci_write_config_byte(dev, 0xCA, 0x57);
-	pci_write_config_byte(dev, 0xCB, disable | 0x02);
-	pci_write_config_byte(dev, 0xCA, write_enable);
-
-	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
-	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-
 	/*
 	 * RICOH 0xe823 SD/MMC card reader fails to recognize
 	 * certain types of SD/MMC cards. Lowering the SD base
@@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 
 		dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
 	}
+
+	pci_read_config_byte(dev, 0xCB, &disable);
+
+	if (disable & 0x02)
+		return;
+
+	pci_read_config_byte(dev, 0xCA, &write_enable);
+	pci_write_config_byte(dev, 0xCA, 0x57);
+	pci_write_config_byte(dev, 0xCB, disable | 0x02);
+	pci_write_config_byte(dev, 0xCA, write_enable);
+
+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);