提交 3dcc4c7d 编写于 作者: L Linus Torvalds

Merge branch 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
 "Dan found a really old bug where libata hotplug code wasn't sanitizing
  index value from userland and may end up indexing with a negative
  number. It is scary but fortunately can only be triggered by root.

  Other than that, minor fixes"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: fix a couple of doc build warnings
  libata: array underflow in ata_find_dev()
  ata: sata_rcar: add gen[23] fallback compatibility strings
  libata: remove unused rc in ata_eh_handle_port_resume
  libata: Cleanup ata_read_log_page()
  ata: fix gemini Kconfig dependencies
* Renesas R-Car SATA
Required properties:
- compatible : should contain one of the following:
- compatible : should contain one or more of the following:
- "renesas,sata-r8a7779" for R-Car H1
("renesas,rcar-sata" is deprecated)
- "renesas,sata-r8a7790-es1" for R-Car H2 ES1
- "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2-W
- "renesas,sata-r8a7793" for R-Car M2-N
- "renesas,sata-r8a7795" for R-Car H3
- "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
- "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
- "renesas,rcar-sata" is deprecated
When compatible with the generic version nodes
must list the SoC-specific version corresponding
to the platform first followed by the generic
version.
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
- clocks : must contain a reference to the functional clock.
......@@ -16,7 +24,7 @@ Required properties:
Example:
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7791";
compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -215,7 +215,7 @@ config SATA_FSL
config SATA_GEMINI
tristate "Gemini SATA bridge support"
depends on PATA_FTIDE010
depends on ARCH_GEMINI || COMPILE_TEST
default ARCH_GEMINI
help
This enabled support for the FTIDE010 to SATA bridge
......@@ -613,7 +613,7 @@ config PATA_FTIDE010
tristate "Faraday Technology FTIDE010 PATA support"
depends on OF
depends on ARM
default ARCH_GEMINI
depends on SATA_GEMINI
help
This option enables support for the Faraday FTIDE010
PATA controller found in the Cortina Gemini SoCs.
......
......@@ -2083,7 +2083,7 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
retry:
ata_tf_init(dev, &tf);
if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
!(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) {
!(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
tf.command = ATA_CMD_READ_LOG_DMA_EXT;
tf.protocol = ATA_PROT_DMA;
dma = true;
......@@ -2102,8 +2102,8 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
buf, sectors * ATA_SECT_SIZE, 0);
if (err_mask && dma) {
dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG;
ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n");
dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
ata_dev_warn(dev, "READ LOG DMA EXT failed, trying PIO\n");
goto retry;
}
......
......@@ -1434,7 +1434,7 @@ void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
/**
* ata_eh_done - EH action complete
* @ap: target ATA port
* @link: ATA link for which EH actions are complete
* @dev: target ATA dev for per-dev action (can be NULL)
* @action: action just completed
*
......@@ -1576,7 +1576,7 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
/**
* ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
* @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
* @qc: qc to perform REQUEST_SENSE_SENSE_DATA_EXT to
* @cmd: scsi command for which the sense code should be set
*
* Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
......@@ -4175,7 +4175,6 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
struct ata_link *link;
struct ata_device *dev;
unsigned long flags;
int rc = 0;
/* are we resuming? */
spin_lock_irqsave(ap->lock, flags);
......@@ -4202,7 +4201,7 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
ata_acpi_set_state(ap, ap->pm_mesg);
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
ap->ops->port_resume(ap);
/* tell ACPI that we're resuming */
ata_acpi_on_resume(ap);
......
......@@ -3030,10 +3030,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
static struct ata_device *ata_find_dev(struct ata_port *ap, int devno)
{
if (!sata_pmp_attached(ap)) {
if (likely(devno < ata_link_max_devices(&ap->link)))
if (likely(devno >= 0 &&
devno < ata_link_max_devices(&ap->link)))
return &ap->link.device[devno];
} else {
if (likely(devno < ap->nr_pmp_links))
if (likely(devno >= 0 &&
devno < ap->nr_pmp_links))
return &ap->pmp_link[devno].device[0];
}
......
......@@ -858,6 +858,14 @@ static const struct of_device_id sata_rcar_match[] = {
.compatible = "renesas,sata-r8a7795",
.data = (void *)RCAR_GEN2_SATA
},
{
.compatible = "renesas,rcar-gen2-sata",
.data = (void *)RCAR_GEN2_SATA
},
{
.compatible = "renesas,rcar-gen3-sata",
.data = (void *)RCAR_GEN2_SATA
},
{ },
};
MODULE_DEVICE_TABLE(of, sata_rcar_match);
......
......@@ -435,7 +435,7 @@ enum {
ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */
ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */
ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */
ATA_HORKAGE_NO_DMA_LOG = (1 << 23), /* don't use DMA for log read */
ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */
ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册