提交 3dc4b7af 编写于 作者: M Mark Brown

Merge remote-tracking branch 'asoc/topic/wm2000' into asoc-next

......@@ -15,9 +15,6 @@ struct wm2000_platform_data {
/** Filename for system-specific image to download to device. */
const char *download_file;
/** Divide MCLK by 2 for system clock? */
unsigned int mclkdiv2:1;
/** Disable speech clarity enhancement, for use when an
* external algorithm is used. */
unsigned int speech_enh_disable:1;
......
......@@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
......@@ -62,6 +63,7 @@ enum wm2000_anc_mode {
struct wm2000_priv {
struct i2c_client *i2c;
struct regmap *regmap;
struct clk *mclk;
struct regulator_bulk_data supplies[WM2000_NUM_SUPPLIES];
......@@ -71,7 +73,6 @@ struct wm2000_priv {
unsigned int anc_eng_ena:1;
unsigned int spk_ena:1;
unsigned int mclk_div:1;
unsigned int speech_clarity:1;
int anc_download_size;
......@@ -133,6 +134,7 @@ static int wm2000_poll_bit(struct i2c_client *i2c,
static int wm2000_power_up(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
unsigned long rate;
int ret;
BUG_ON(wm2000->anc_mode != ANC_OFF);
......@@ -145,7 +147,8 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
return ret;
}
if (!wm2000->mclk_div) {
rate = clk_get_rate(wm2000->mclk);
if (rate <= 13500000) {
dev_dbg(&i2c->dev, "Disabling MCLK divider\n");
wm2000_write(i2c, WM2000_REG_SYS_CTL2,
WM2000_MCLK_DIV2_ENA_CLR);
......@@ -552,6 +555,15 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000,
return -EINVAL;
}
/* Maintain clock while active */
if (anc_transitions[i].source == ANC_OFF) {
ret = clk_prepare_enable(wm2000->mclk);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable MCLK: %d\n", ret);
return ret;
}
}
for (j = 0; j < ARRAY_SIZE(anc_transitions[j].step); j++) {
if (!anc_transitions[i].step[j])
break;
......@@ -561,7 +573,10 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000,
return ret;
}
return 0;
if (anc_transitions[i].dest == ANC_OFF)
clk_disable_unprepare(wm2000->mclk);
return ret;
}
static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)
......@@ -651,6 +666,7 @@ static int wm2000_speaker_put(struct snd_kcontrol *kcontrol,
}
static const struct snd_kcontrol_new wm2000_controls[] = {
SOC_SINGLE("ANC Volume", WM2000_REG_ANC_GAIN_CTRL, 0, 255, 0),
SOC_SINGLE_BOOL_EXT("WM2000 ANC Switch", 0,
wm2000_anc_mode_get,
wm2000_anc_mode_put),
......@@ -725,6 +741,9 @@ static bool wm2000_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM2000_REG_SYS_START:
case WM2000_REG_ANC_GAIN_CTRL:
case WM2000_REG_MSE_TH1:
case WM2000_REG_MSE_TH2:
case WM2000_REG_SPEECH_CLARITY:
case WM2000_REG_SYS_WATCHDOG:
case WM2000_REG_ANA_VMID_PD_TIME:
......@@ -760,6 +779,8 @@ static int wm2000_probe(struct snd_soc_codec *codec)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
snd_soc_codec_set_cache_io(codec, 16, 8, SND_SOC_REGMAP);
/* This will trigger a transition to standby mode by default */
wm2000_anc_set_mode(wm2000);
......@@ -848,10 +869,16 @@ static int wm2000_i2c_probe(struct i2c_client *i2c,
reg = wm2000_read(i2c, WM2000_REG_REVISON);
dev_info(&i2c->dev, "revision %c\n", reg + 'A');
wm2000->mclk = devm_clk_get(&i2c->dev, "MCLK");
if (IS_ERR(wm2000->mclk)) {
ret = PTR_ERR(wm2000->mclk);
dev_err(&i2c->dev, "Failed to get MCLK: %d\n", ret);
goto err_supplies;
}
filename = "wm2000_anc.bin";
pdata = dev_get_platdata(&i2c->dev);
if (pdata) {
wm2000->mclk_div = pdata->mclkdiv2;
wm2000->speech_clarity = !pdata->speech_enh_disable;
if (pdata->download_file)
......
......@@ -10,6 +10,9 @@
#define _WM2000_H
#define WM2000_REG_SYS_START 0x8000
#define WM2000_REG_ANC_GAIN_CTRL 0x8fa2
#define WM2000_REG_MSE_TH2 0x8fdf
#define WM2000_REG_MSE_TH1 0x8fe0
#define WM2000_REG_SPEECH_CLARITY 0x8fef
#define WM2000_REG_SYS_WATCHDOG 0x8ff6
#define WM2000_REG_ANA_VMID_PD_TIME 0x8ff7
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册