Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Michael Turquette:
 "The first set of clk fixes for 4.1 are all driver bugs, with the
  exception of a single locking fix in the core code.

  All driver fixes are for code that was merged recently.  The Samsung
  stuff is mostly fixes around suspend/resume, the Qualcomm fixes are
  for invalid hardware configuration data and the Silicon Labs patches
  are fixes following their move away from platform_data to Device Tree"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: si5351: Do not pass struct clk in platform_data
  clk: si5351: Mention clock-names in the binding documentation
  clk: add missing lock when call clk_core_enable in clk_set_parent
  clk: exynos5420: Restore GATE_BUS_TOP on suspend
  clk: qcom: Fix MSM8916 gfx3d_clk_src configuration
  clk: qcom: Fix MSM8916 venus divider value
  clk: exynos5433: Fix wrong PMS value of exynos5433_pll_rates
  clk: exynos5433: Fix wrong parent clock of sclk_apollo clock
  clk: exynos5433: Fix CLK_PCLK_MONOTONIC_CNT clk register assignment
  clk: exynos5433: Fix wrong offset of PCLK_MSCL_SECURE_SMMU_JPEG
  clk: Use CONFIG_ARCH_EXYNOS instead of CONFIG_ARCH_EXYNOS5433

Documentation/devicetree/bindings/clock/silabs,si5351.txt

@@ -17,7 +17,8 @@ Required properties:
 - #clock-cells: from common clock binding; shall be set to 1.
 - clocks: from common clock binding; list of parent clock
   handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only.
+  si5351c only. Corresponding clock input names are "xtal" and
+  "clkin" respectively.
 - #address-cells: shall be set to 1.
 - #size-cells: shall be set to 0.
 
@@ -71,6 +72,7 @@ i2c-master-node {
 
 		/* connect xtal input to 25MHz reference */
 		clocks = <&ref25>;
+		clock-names = "xtal";
 
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;

drivers/clk/clk-si5351.c

@@ -1128,13 +1128,6 @@ static int si5351_dt_parse(struct i2c_client *client,
 	if (!pdata)
 		return -ENOMEM;
 
-	pdata->clk_xtal = of_clk_get(np, 0);
-	if (!IS_ERR(pdata->clk_xtal))
-		clk_put(pdata->clk_xtal);
-	pdata->clk_clkin = of_clk_get(np, 1);
-	if (!IS_ERR(pdata->clk_clkin))
-		clk_put(pdata->clk_clkin);
-
 	/*
 	 * property silabs,pll-source : <num src>, [<..>]
 	 * allow to selectively set pll source
@@ -1328,8 +1321,22 @@ static int si5351_i2c_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, drvdata);
 	drvdata->client = client;
 	drvdata->variant = variant;
-	drvdata->pxtal = pdata->clk_xtal;
-	drvdata->pclkin = pdata->clk_clkin;
+	drvdata->pxtal = devm_clk_get(&client->dev, "xtal");
+	drvdata->pclkin = devm_clk_get(&client->dev, "clkin");
+
+	if (PTR_ERR(drvdata->pxtal) == -EPROBE_DEFER ||
+	    PTR_ERR(drvdata->pclkin) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	/*
+	 * Check for valid parent clock: VARIANT_A and VARIANT_B need XTAL,
+	 *   VARIANT_C can have CLKIN instead.
+	 */
+	if (IS_ERR(drvdata->pxtal) &&
+	    (drvdata->variant != SI5351_VARIANT_C || IS_ERR(drvdata->pclkin))) {
+		dev_err(&client->dev, "missing parent clock\n");
+		return -EINVAL;
+	}
 
 	drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config);
 	if (IS_ERR(drvdata->regmap)) {
@@ -1393,6 +1400,11 @@ static int si5351_i2c_probe(struct i2c_client *client,
 		}
 	}
 
+	if (!IS_ERR(drvdata->pxtal))
+		clk_prepare_enable(drvdata->pxtal);
+	if (!IS_ERR(drvdata->pclkin))
+		clk_prepare_enable(drvdata->pclkin);
+
 	/* register xtal input clock gate */
 	memset(&init, 0, sizeof(init));
 	init.name = si5351_input_names[0];
@@ -1407,7 +1419,8 @@ static int si5351_i2c_probe(struct i2c_client *client,
 	clk = devm_clk_register(&client->dev, &drvdata->xtal);
 	if (IS_ERR(clk)) {
 		dev_err(&client->dev, "unable to register %s\n", init.name);
-		return PTR_ERR(clk);
+		ret = PTR_ERR(clk);
+		goto err_clk;
 	}
 
 	/* register clkin input clock gate */
@@ -1425,7 +1438,8 @@ static int si5351_i2c_probe(struct i2c_client *client,
 		if (IS_ERR(clk)) {
 			dev_err(&client->dev, "unable to register %s\n",
 				init.name);
-			return PTR_ERR(clk);
+			ret = PTR_ERR(clk);
+			goto err_clk;
 		}
 	}
 
@@ -1447,7 +1461,8 @@ static int si5351_i2c_probe(struct i2c_client *client,
 	clk = devm_clk_register(&client->dev, &drvdata->pll[0].hw);
 	if (IS_ERR(clk)) {
 		dev_err(&client->dev, "unable to register %s\n", init.name);
-		return -EINVAL;
+		ret = PTR_ERR(clk);
+		goto err_clk;
 	}
 
 	/* register PLLB or VXCO (Si5351B) */
@@ -1471,7 +1486,8 @@ static int si5351_i2c_probe(struct i2c_client *client,
 	clk = devm_clk_register(&client->dev, &drvdata->pll[1].hw);
 	if (IS_ERR(clk)) {
 		dev_err(&client->dev, "unable to register %s\n", init.name);
-		return -EINVAL;
+		ret = PTR_ERR(clk);
+		goto err_clk;
 	}
 
 	/* register clk multisync and clk out divider */
@@ -1492,8 +1508,10 @@ static int si5351_i2c_probe(struct i2c_client *client,
 		num_clocks * sizeof(*drvdata->onecell.clks), GFP_KERNEL);
 
 	if (WARN_ON(!drvdata->msynth || !drvdata->clkout ||
-		    !drvdata->onecell.clks))
-		return -ENOMEM;
+		    !drvdata->onecell.clks)) {
+		ret = -ENOMEM;
+		goto err_clk;
+	}
 
 	for (n = 0; n < num_clocks; n++) {
 		drvdata->msynth[n].num = n;
@@ -1511,7 +1529,8 @@ static int si5351_i2c_probe(struct i2c_client *client,
 		if (IS_ERR(clk)) {
 			dev_err(&client->dev, "unable to register %s\n",
 				init.name);
-			return -EINVAL;
+			ret = PTR_ERR(clk);
+			goto err_clk;
 		}
 	}
 
@@ -1538,7 +1557,8 @@ static int si5351_i2c_probe(struct i2c_client *client,
 		if (IS_ERR(clk)) {
 			dev_err(&client->dev, "unable to register %s\n",
 				init.name);
-			return -EINVAL;
+			ret = PTR_ERR(clk);
+			goto err_clk;
 		}
 		drvdata->onecell.clks[n] = clk;
 
@@ -1557,10 +1577,17 @@ static int si5351_i2c_probe(struct i2c_client *client,
 				  &drvdata->onecell);
 	if (ret) {
 		dev_err(&client->dev, "unable to add clk provider\n");
-		return ret;
+		goto err_clk;
 	}
 
 	return 0;
+
+err_clk:
+	if (!IS_ERR(drvdata->pxtal))
+		clk_disable_unprepare(drvdata->pxtal);
+	if (!IS_ERR(drvdata->pclkin))
+		clk_disable_unprepare(drvdata->pclkin);
+	return ret;
 }
 
 static const struct i2c_device_id si5351_i2c_ids[] = {

drivers/clk/clk.c

@@ -1475,8 +1475,10 @@ static struct clk_core *__clk_set_parent_before(struct clk_core *clk,
 	 */
 	if (clk->prepare_count) {
 		clk_core_prepare(parent);
+		flags = clk_enable_lock();
 		clk_core_enable(parent);
 		clk_core_enable(clk);
+		clk_enable_unlock(flags);
 	}
 
 	/* update the clk tree topology */
@@ -1491,13 +1493,17 @@ static void __clk_set_parent_after(struct clk_core *core,
 				   struct clk_core *parent,
 				   struct clk_core *old_parent)
 {
+	unsigned long flags;
+
 	/*
 	 * Finish the migration of prepare state and undo the changes done
 	 * for preventing a race with clk_enable().
 	 */
 	if (core->prepare_count) {
+		flags = clk_enable_lock();
 		clk_core_disable(core);
 		clk_core_disable(old_parent);
+		clk_enable_unlock(flags);
 		clk_core_unprepare(old_parent);
 	}
 }
@@ -1525,8 +1531,10 @@ static int __clk_set_parent(struct clk_core *clk, struct clk_core *parent,
 		clk_enable_unlock(flags);
 
 		if (clk->prepare_count) {
+			flags = clk_enable_lock();
 			clk_core_disable(clk);
 			clk_core_disable(parent);
+			clk_enable_unlock(flags);
 			clk_core_unprepare(parent);
 		}
 		return ret;

drivers/clk/qcom/gcc-msm8916.c

@@ -71,8 +71,8 @@ static const char *gcc_xo_gpll0_bimc[] = {
 static const struct parent_map gcc_xo_gpll0a_gpll1_gpll2a_map[] = {
 	{ P_XO, 0 },
 	{ P_GPLL0_AUX, 3 },
-	{ P_GPLL2_AUX, 2 },
 	{ P_GPLL1, 1 },
+	{ P_GPLL2_AUX, 2 },
 };
 
 static const char *gcc_xo_gpll0a_gpll1_gpll2a[] = {
@@ -1115,7 +1115,7 @@ static struct clk_rcg2 usb_hs_system_clk_src = {
 static const struct freq_tbl ftbl_gcc_venus0_vcodec0_clk[] = {
 	F(100000000, P_GPLL0, 8, 0, 0),
 	F(160000000, P_GPLL0, 5, 0, 0),
-	F(228570000, P_GPLL0, 5, 0, 0),
+	F(228570000, P_GPLL0, 3.5, 0, 0),
 	{ }
 };
 

drivers/clk/samsung/Makefile

@@ -10,7 +10,7 @@ obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
 obj-$(CONFIG_SOC_EXYNOS5260)	+= clk-exynos5260.o
 obj-$(CONFIG_SOC_EXYNOS5410)	+= clk-exynos5410.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
-obj-$(CONFIG_ARCH_EXYNOS5433)	+= clk-exynos5433.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos5433.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-clkout.o

drivers/clk/samsung/clk-exynos5420.c

@@ -271,6 +271,7 @@ static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = {
 	{ .offset = SRC_MASK_PERIC0,		.value = 0x11111110, },
 	{ .offset = SRC_MASK_PERIC1,		.value = 0x11111100, },
 	{ .offset = SRC_MASK_ISP,		.value = 0x11111000, },
+	{ .offset = GATE_BUS_TOP,		.value = 0xffffffff, },
 	{ .offset = GATE_BUS_DISP1,		.value = 0xffffffff, },
 	{ .offset = GATE_IP_PERIC,		.value = 0xffffffff, },
 };

drivers/clk/samsung/clk-exynos5433.c

@@ -748,7 +748,7 @@ static struct samsung_pll_rate_table exynos5443_pll_rates[] = {
 	PLL_35XX_RATE(825000000U,  275, 4,  1),
 	PLL_35XX_RATE(800000000U,  400, 6,  1),
 	PLL_35XX_RATE(733000000U,  733, 12, 1),
-	PLL_35XX_RATE(700000000U,  360, 6,  1),
+	PLL_35XX_RATE(700000000U,  175, 3,  1),
 	PLL_35XX_RATE(667000000U,  222, 4,  1),
 	PLL_35XX_RATE(633000000U,  211, 4,  1),
 	PLL_35XX_RATE(600000000U,  500, 5,  2),
@@ -760,14 +760,14 @@ static struct samsung_pll_rate_table exynos5443_pll_rates[] = {
 	PLL_35XX_RATE(444000000U,  370, 5,  2),
 	PLL_35XX_RATE(420000000U,  350, 5,  2),
 	PLL_35XX_RATE(400000000U,  400, 6,  2),
-	PLL_35XX_RATE(350000000U,  360, 6,  2),
+	PLL_35XX_RATE(350000000U,  350, 6,  2),
 	PLL_35XX_RATE(333000000U,  222, 4,  2),
 	PLL_35XX_RATE(300000000U,  500, 5,  3),
 	PLL_35XX_RATE(266000000U,  532, 6,  3),
 	PLL_35XX_RATE(200000000U,  400, 6,  3),
 	PLL_35XX_RATE(166000000U,  332, 6,  3),
 	PLL_35XX_RATE(160000000U,  320, 6,  3),
-	PLL_35XX_RATE(133000000U,  552, 6,  4),
+	PLL_35XX_RATE(133000000U,  532, 6,  4),
 	PLL_35XX_RATE(100000000U,  400, 6,  4),
 	{ /* sentinel */ }
 };
@@ -1490,7 +1490,7 @@ static struct samsung_gate_clock mif_gate_clks[] __initdata = {
 
 	/* ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT */
 	GATE(CLK_PCLK_MONOTONIC_CNT, "pclk_monotonic_cnt", "div_aclk_mif_133",
-			ENABLE_PCLK_MIF_SECURE_RTC, 0, 0, 0),
+			ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT, 0, 0, 0),
 
 	/* ENABLE_PCLK_MIF_SECURE_RTC */
 	GATE(CLK_PCLK_RTC, "pclk_rtc", "div_aclk_mif_133",
@@ -3665,7 +3665,7 @@ static struct samsung_gate_clock apollo_gate_clks[] __initdata = {
 			ENABLE_SCLK_APOLLO, 3, CLK_IGNORE_UNUSED, 0),
 	GATE(CLK_SCLK_HPM_APOLLO, "sclk_hpm_apollo", "div_sclk_hpm_apollo",
 			ENABLE_SCLK_APOLLO, 1, CLK_IGNORE_UNUSED, 0),
-	GATE(CLK_SCLK_APOLLO, "sclk_apollo", "div_apollo_pll",
+	GATE(CLK_SCLK_APOLLO, "sclk_apollo", "div_apollo2",
 			ENABLE_SCLK_APOLLO, 0, CLK_IGNORE_UNUSED, 0),
 };
 
@@ -3927,7 +3927,7 @@ CLK_OF_DECLARE(exynos5433_cmu_atlas, "samsung,exynos5433-cmu-atlas",
 #define ENABLE_PCLK_MSCL				0x0900
 #define ENABLE_PCLK_MSCL_SECURE_SMMU_M2MSCALER0		0x0904
 #define ENABLE_PCLK_MSCL_SECURE_SMMU_M2MSCALER1		0x0908
-#define ENABLE_PCLK_MSCL_SECURE_SMMU_JPEG		0x000c
+#define ENABLE_PCLK_MSCL_SECURE_SMMU_JPEG		0x090c
 #define ENABLE_SCLK_MSCL				0x0a00
 #define ENABLE_IP_MSCL0					0x0b00
 #define ENABLE_IP_MSCL1					0x0b04

include/linux/platform_data/si5351.h

@@ -5,8 +5,6 @@
 #ifndef __LINUX_PLATFORM_DATA_SI5351_H__
 #define __LINUX_PLATFORM_DATA_SI5351_H__
 
-struct clk;
-
 /**
  * enum si5351_pll_src - Si5351 pll clock source
  * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config
@@ -107,8 +105,6 @@ struct si5351_clkout_config {
  * @clkout: array of clkout configuration
  */
 struct si5351_platform_data {
-	struct clk *clk_xtal;
-	struct clk *clk_clkin;
 	enum si5351_pll_src pll_src[2];
 	struct si5351_clkout_config clkout[8];
 };