提交 3c94566c 编写于 作者: A Alex Deucher

drm/radeon/rs780: implement get_current_sclk/mclk

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
上级 d7dbce09
......@@ -1170,6 +1170,8 @@ static struct radeon_asic rs780_asic = {
.print_power_state = &rs780_dpm_print_power_state,
.debugfs_print_current_performance_level = &rs780_dpm_debugfs_print_current_performance_level,
.force_performance_level = &rs780_dpm_force_performance_level,
.get_current_sclk = &rs780_dpm_get_current_sclk,
.get_current_mclk = &rs780_dpm_get_current_mclk,
},
.pflip = {
.page_flip = &rs600_page_flip,
......
......@@ -449,6 +449,8 @@ void rs780_dpm_debugfs_print_current_performance_level(struct radeon_device *rde
struct seq_file *m);
int rs780_dpm_force_performance_level(struct radeon_device *rdev,
enum radeon_dpm_forced_level level);
u32 rs780_dpm_get_current_sclk(struct radeon_device *rdev);
u32 rs780_dpm_get_current_mclk(struct radeon_device *rdev);
/*
* rv770,rv730,rv710,rv740
......
......@@ -1001,6 +1001,28 @@ void rs780_dpm_debugfs_print_current_performance_level(struct radeon_device *rde
ps->sclk_high, ps->max_voltage);
}
/* get the current sclk in 10 khz units */
u32 rs780_dpm_get_current_sclk(struct radeon_device *rdev)
{
u32 current_fb_div = RREG32(FVTHROT_STATUS_REG0) & CURRENT_FEEDBACK_DIV_MASK;
u32 func_cntl = RREG32(CG_SPLL_FUNC_CNTL);
u32 ref_div = ((func_cntl & SPLL_REF_DIV_MASK) >> SPLL_REF_DIV_SHIFT) + 1;
u32 post_div = ((func_cntl & SPLL_SW_HILEN_MASK) >> SPLL_SW_HILEN_SHIFT) + 1 +
((func_cntl & SPLL_SW_LOLEN_MASK) >> SPLL_SW_LOLEN_SHIFT) + 1;
u32 sclk = (rdev->clock.spll.reference_freq * current_fb_div) /
(post_div * ref_div);
return sclk;
}
/* get the current mclk in 10 khz units */
u32 rs780_dpm_get_current_mclk(struct radeon_device *rdev)
{
struct igp_power_info *pi = rs780_get_pi(rdev);
return pi->bootup_uma_clk;
}
int rs780_dpm_force_performance_level(struct radeon_device *rdev,
enum radeon_dpm_forced_level level)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册