提交 3bd7d909 编写于 作者: D Daniel Kurtz 提交者: Daniel Vetter

drm/i915/intel_i2c: refactor using intel_gmbus_get_adapter

Instead of letting other modules directly access the ->gmbus array,
introduce intel_gmbus_get_adapter() for looking up an i2c_adapter
for a given gmbus port identifier.  This will enable later refactoring
of the gmbus port list.

Note: Before requesting an adapter for a given gmbus port number, the
driver must first check its validity using i2c_intel_gmbus_is_port_valid().
If this check fails, a call to intel_gmbus_get_adapter() will WARN_ON and
return NULL.  This is relevant for parts of the driver that read a port
from VBIOS, which might be improperly initialized and contain an invalid
port.  In these cases, the driver must fall back to using a safer default
port.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 489fbc10
......@@ -1342,6 +1342,13 @@ extern int i915_restore_state(struct drm_device *dev);
/* intel_i2c.c */
extern int intel_setup_gmbus(struct drm_device *dev);
extern void intel_teardown_gmbus(struct drm_device *dev);
extern inline bool intel_gmbus_is_port_valid(unsigned port)
{
return (port >= GMBUS_PORT_DISABLED && port <= GMBUS_PORT_RESERVED);
}
extern struct i2c_adapter *intel_gmbus_get_adapter(
struct drm_i915_private *dev_priv, unsigned port);
extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
......
......@@ -372,11 +372,11 @@ parse_general_definitions(struct drm_i915_private *dev_priv,
if (block_size >= sizeof(*general)) {
int bus_pin = general->crt_ddc_gmbus_pin;
DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
if (bus_pin >= 1 && bus_pin <= 6)
if (intel_gmbus_is_port_valid(bus_pin))
dev_priv->crt_ddc_pin = bus_pin;
} else {
DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
block_size);
block_size);
}
}
}
......
......@@ -278,9 +278,10 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
struct edid *edid;
bool is_digital = false;
struct i2c_adapter *i2c;
edid = drm_get_edid(connector,
&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
edid = drm_get_edid(connector, i2c);
/*
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
......@@ -483,15 +484,16 @@ static int intel_crt_get_modes(struct drm_connector *connector)
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
struct i2c_adapter *i2c;
ret = intel_ddc_get_modes(connector,
&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
ret = intel_ddc_get_modes(connector, i2c);
if (ret || !IS_G4X(dev))
return ret;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
return intel_ddc_get_modes(connector,
&dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
return intel_ddc_get_modes(connector, i2c);
}
static int intel_crt_set_property(struct drm_connector *connector,
......
......@@ -243,7 +243,7 @@ static int intel_dvo_get_modes(struct drm_connector *connector)
* that's not the case.
*/
intel_ddc_get_modes(connector,
&dev_priv->gmbus[GMBUS_PORT_DPC].adapter);
intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
if (!list_empty(&connector->probed_modes))
return 1;
......@@ -375,7 +375,7 @@ void intel_dvo_init(struct drm_device *dev)
* special cases, but otherwise default to what's defined
* in the spec.
*/
if (dvo->gpio != 0)
if (intel_gmbus_is_port_valid(dvo->gpio))
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
gpio = GMBUS_PORT_SSC;
......@@ -386,7 +386,7 @@ void intel_dvo_init(struct drm_device *dev)
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
i2c = &dev_priv->gmbus[gpio].adapter;
i2c = intel_gmbus_get_adapter(dev_priv, gpio);
intel_dvo->dev = *dvo;
if (!dvo->dev_ops->init(&intel_dvo->dev, i2c))
......
......@@ -334,7 +334,8 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
intel_hdmi->has_hdmi_sink = false;
intel_hdmi->has_audio = false;
edid = drm_get_edid(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
......@@ -367,7 +368,8 @@ static int intel_hdmi_get_modes(struct drm_connector *connector)
*/
return intel_ddc_get_modes(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
}
static bool
......@@ -379,7 +381,8 @@ intel_hdmi_detect_audio(struct drm_connector *connector)
bool has_audio = false;
edid = drm_get_edid(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL)
has_audio = drm_detect_monitor_audio(edid);
......
......@@ -449,6 +449,14 @@ int intel_setup_gmbus(struct drm_device *dev)
return ret;
}
struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *dev_priv,
unsigned port)
{
WARN_ON(!intel_gmbus_is_port_valid(port));
return (intel_gmbus_is_port_valid(port)) ?
&dev_priv->gmbus[port].adapter : NULL;
}
void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
{
struct intel_gmbus *bus = to_intel_gmbus(adapter);
......
......@@ -837,8 +837,8 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev,
child->device_type != DEVICE_TYPE_LFP)
continue;
if (child->i2c_pin)
*i2c_pin = child->i2c_pin;
if (intel_gmbus_is_port_valid(child->i2c_pin))
*i2c_pin = child->i2c_pin;
/* However, we cannot trust the BIOS writers to populate
* the VBT correctly. Since LVDS requires additional
......@@ -979,7 +979,8 @@ bool intel_lvds_init(struct drm_device *dev)
* preferred mode is the right one.
*/
intel_lvds->edid = drm_get_edid(connector,
&dev_priv->gmbus[pin].adapter);
intel_gmbus_get_adapter(dev_priv,
pin));
if (intel_lvds->edid) {
if (drm_add_edid_modes(connector,
intel_lvds->edid)) {
......
......@@ -55,7 +55,8 @@ bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus)
}
};
return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2;
return i2c_transfer(intel_gmbus_get_adapter(dev_priv, ddc_bus),
msgs, 2) == 2;
}
/**
......
......@@ -1254,7 +1254,8 @@ intel_sdvo_get_analog_edid(struct drm_connector *connector)
struct drm_i915_private *dev_priv = connector->dev->dev_private;
return drm_get_edid(connector,
&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
intel_gmbus_get_adapter(dev_priv,
dev_priv->crt_ddc_pin));
}
enum drm_connector_status
......@@ -1922,12 +1923,12 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
if (mapping->initialized)
pin = mapping->i2c_pin;
if (pin < GMBUS_NUM_PORTS) {
sdvo->i2c = &dev_priv->gmbus[pin].adapter;
if (intel_gmbus_is_port_valid(pin)) {
sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin);
intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ);
intel_gmbus_force_bit(sdvo->i2c, true);
} else {
sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
sdvo->i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册