提交 3b8a0795 编写于 作者: P Peter Ujfalusi 提交者: Mark Brown

ASoC: twl4030: Debug code cleanup

Replace the printk(KERN_ERR* instances with dev_err in the driver.
While we are here clean up some of the debug messages as well.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 26422625
......@@ -1002,8 +1002,8 @@ static int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
unsigned short mask, bitmask;
if (twl4030->configured) {
printk(KERN_ERR "twl4030 operation mode cannot be "
"changed on-the-fly\n");
dev_err(codec->dev,
"operation mode cannot be changed on-the-fly\n");
return -EBUSY;
}
......@@ -1800,7 +1800,7 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
mode |= TWL4030_APLL_RATE_96000;
break;
default:
printk(KERN_ERR "TWL4030 hw params: unknown rate %d\n",
dev_err(codec->dev, "%s: unknown rate %d\n", __func__,
params_rate(params));
return -EINVAL;
}
......@@ -1817,7 +1817,7 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
format |= TWL4030_DATA_WIDTH_32S_24W;
break;
default:
printk(KERN_ERR "TWL4030 hw params: unknown format %d\n",
dev_err(codec->dev, "%s: unknown format %d\n", __func__,
params_format(params));
return -EINVAL;
}
......@@ -1867,13 +1867,13 @@ static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai,
case 38400000:
break;
default:
dev_err(codec->dev, "Unsupported APLL mclk: %u\n", freq);
dev_err(codec->dev, "Unsupported HFCLKIN: %u\n", freq);
return -EINVAL;
}
if ((freq / 1000) != twl4030->sysclk) {
dev_err(codec->dev,
"Mismatch in APLL mclk: %u (configured: %u)\n",
"Mismatch in HFCLKIN: %u (configured: %u)\n",
freq, twl4030->sysclk * 1000);
return -EINVAL;
}
......@@ -1983,9 +1983,9 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
* not available.
*/
if (twl4030->sysclk != 26000) {
dev_err(codec->dev, "The board is configured for %u Hz, while"
"the Voice interface needs 26MHz APLL mclk\n",
twl4030->sysclk * 1000);
dev_err(codec->dev,
"%s: HFCLKIN is %u KHz, voice interface needs 26MHz\n",
__func__, twl4030->sysclk);
return -EINVAL;
}
......@@ -1996,8 +1996,8 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
& TWL4030_OPT_MODE;
if (mode != TWL4030_OPTION_2) {
printk(KERN_ERR "TWL4030 voice startup: "
"the codec mode is not option2\n");
dev_err(codec->dev, "%s: the codec mode is not option2\n",
__func__);
return -EINVAL;
}
......@@ -2038,7 +2038,7 @@ static int twl4030_voice_hw_params(struct snd_pcm_substream *substream,
mode |= TWL4030_SEL_16K;
break;
default:
printk(KERN_ERR "TWL4030 voice hw params: unknown rate %d\n",
dev_err(codec->dev, "%s: unknown rate %d\n", __func__,
params_rate(params));
return -EINVAL;
}
......@@ -2067,13 +2067,14 @@ static int twl4030_voice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
if (freq != 26000000) {
dev_err(codec->dev, "Unsupported APLL mclk: %u, the Voice"
"interface needs 26MHz APLL mclk\n", freq);
dev_err(codec->dev,
"%s: HFCLKIN is %u KHz, voice interface needs 26MHz\n",
__func__, freq / 1000);
return -EINVAL;
}
if ((freq / 1000) != twl4030->sysclk) {
dev_err(codec->dev,
"Mismatch in APLL mclk: %u (configured: %u)\n",
"Mismatch in HFCLKIN: %u (configured: %u)\n",
freq, twl4030->sysclk * 1000);
return -EINVAL;
}
......@@ -2221,7 +2222,7 @@ static int twl4030_soc_probe(struct snd_soc_codec *codec)
twl4030 = kzalloc(sizeof(struct twl4030_priv), GFP_KERNEL);
if (twl4030 == NULL) {
printk("Can not allocate memory\n");
dev_err(codec->dev, "Can not allocate memory\n");
return -ENOMEM;
}
snd_soc_codec_set_drvdata(codec, twl4030);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册