提交 3b424f33 编写于 作者: M Michael Hennerich 提交者: Greg Kroah-Hartman

staging:iio:adc:ad7291: Add regulator, reference voltage and scale handling

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 00feefbb
......@@ -14,6 +14,8 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include "../iio.h"
#include "../sysfs.h"
......@@ -27,8 +29,8 @@
*
* The noise-delayed bit as per datasheet suggestion is always enabled.
*
* Extref control should be based on regulator provision - not handled.
*/
/*
* AD7291 registers definition
*/
......@@ -61,16 +63,21 @@
* AD7291 value masks
*/
#define AD7291_CHANNEL_MASK 0xF000
#define AD7291_BITS 12
#define AD7291_VALUE_MASK 0xFFF
#define AD7291_T_VALUE_SIGN 0x400
#define AD7291_T_VALUE_FLOAT_OFFSET 2
#define AD7291_T_VALUE_FLOAT_MASK 0x2
#define AD7291_BITS 12
struct ad7291_chip_info {
struct i2c_client *client;
u16 command;
u8 c_mask; /* Active voltage channels for events */
struct mutex state_lock;
struct i2c_client *client;
struct regulator *reg;
u16 int_vref_mv;
u16 command;
u8 c_mask; /* Active voltage channels for events */
struct mutex state_lock;
};
static int ad7291_i2c_read(struct ad7291_chip_info *chip, u8 reg, u16 *data)
......@@ -420,6 +427,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
{
int ret;
struct ad7291_chip_info *chip = iio_priv(indio_dev);
unsigned int scale_uv;
u16 regval;
s16 signval;
......@@ -471,6 +479,11 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
signval = (s16)((swab16((u16)ret) & 0x0FFF) << 4) >> 4;
*val = signval;
return IIO_VAL_INT;
case (1 << IIO_CHAN_INFO_SCALE_SHARED):
scale_uv = (chip->int_vref_mv * 1000) >> AD7291_BITS;
*val = scale_uv / 1000;
*val2 = (scale_uv % 1000) * 1000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
......@@ -479,6 +492,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
#define AD7291_VOLTAGE_CHAN(_chan) \
{ \
.type = IIO_VOLTAGE, \
.info_mask = (1 << IIO_CHAN_INFO_SCALE_SHARED), \
.indexed = 1, \
.channel = _chan, \
.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|\
......@@ -524,7 +538,7 @@ static int __devinit ad7291_probe(struct i2c_client *client,
{
struct ad7291_chip_info *chip;
struct iio_dev *indio_dev;
int ret = 0;
int ret = 0, voltage_uv = 0;
indio_dev = iio_allocate_device(sizeof(*chip));
if (indio_dev == NULL) {
......@@ -532,6 +546,15 @@ static int __devinit ad7291_probe(struct i2c_client *client,
goto error_ret;
}
chip = iio_priv(indio_dev);
chip->reg = regulator_get(&client->dev, "vcc");
if (!IS_ERR(chip->reg)) {
ret = regulator_enable(chip->reg);
if (ret)
goto error_put_reg;
voltage_uv = regulator_get_voltage(chip->reg);
}
mutex_init(&chip->state_lock);
/* this is only used for device removal purposes */
i2c_set_clientdata(client, indio_dev);
......@@ -540,6 +563,13 @@ static int __devinit ad7291_probe(struct i2c_client *client,
/* Tsense always enabled */
chip->command = AD7291_NOISE_DELAY | AD7291_T_SENSE_MASK;
if (voltage_uv) {
chip->int_vref_mv = voltage_uv / 1000;
chip->command |= AD7291_EXT_REF;
} else {
chip->int_vref_mv = 2500; /* Build-in ref */
}
indio_dev->name = id->name;
indio_dev->channels = ad7291_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7291_channels);
......@@ -556,7 +586,7 @@ static int __devinit ad7291_probe(struct i2c_client *client,
id->name,
indio_dev);
if (ret)
goto error_free_dev;
goto error_disable_reg;
/* set irq polarity low level */
chip->command |= AD7291_ALERT_POLARITY;
......@@ -572,7 +602,7 @@ static int __devinit ad7291_probe(struct i2c_client *client,
if (ret)
goto error_unreg_irq;
dev_info(&client->dev, "%s temperature sensor registered.\n",
dev_info(&client->dev, "%s ADC registered.\n",
id->name);
return 0;
......@@ -580,7 +610,13 @@ static int __devinit ad7291_probe(struct i2c_client *client,
error_unreg_irq:
if (client->irq)
free_irq(client->irq, indio_dev);
error_free_dev:
error_disable_reg:
if (!IS_ERR(chip->reg))
regulator_disable(chip->reg);
error_put_reg:
if (!IS_ERR(chip->reg))
regulator_put(chip->reg);
iio_free_device(indio_dev);
error_ret:
return ret;
......@@ -589,9 +625,16 @@ static int __devinit ad7291_probe(struct i2c_client *client,
static int __devexit ad7291_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ad7291_chip_info *chip = iio_priv(indio_dev);
if (client->irq)
free_irq(client->irq, indio_dev);
if (!IS_ERR(chip->reg)) {
regulator_disable(chip->reg);
regulator_put(chip->reg);
}
iio_device_unregister(indio_dev);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册