提交 3b26bf17 编写于 作者: S Samuel Ortiz 提交者: Samuel Ortiz

mfd: New asic3 gpio configuration code

The ASIC3 GPIO configuration code is a bit obscure and hardly readable.
This patch changes it so that it is now more readable and understandable,
by being more explicit.
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
上级 1effe5bc
......@@ -465,69 +465,54 @@ static void asic3_gpio_set(struct gpio_chip *chip,
return;
}
static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base,
unsigned int function)
static int asic3_gpio_probe(struct platform_device *pdev,
u16 *gpio_config, int num)
{
return asic3_read_register(asic, base + function);
}
static void asic3_set_gpio(struct asic3 *asic, unsigned int base,
unsigned int function, u32 bits, u32 val)
{
unsigned long flags;
spin_lock_irqsave(&asic->lock, flags);
val |= (asic3_read_register(asic, base + function) & ~bits);
asic3_write_register(asic, base + function, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
#define asic3_set_gpio_a(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_b(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_c(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_d(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \
do { \
asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \
asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \
asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \
asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \
} while (0)
static int asic3_gpio_probe(struct platform_device *pdev)
{
struct asic3_platform_data *pdata = pdev->dev.platform_data;
struct asic3 *asic = platform_get_drvdata(pdev);
u16 alt_reg[ASIC3_NUM_GPIO_BANKS];
u16 out_reg[ASIC3_NUM_GPIO_BANKS];
u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
int i;
memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS);
memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS);
memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS);
/* Enable all GPIOs */
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff);
if (pdata) {
asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init);
asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir);
asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata,
sleep_mask);
asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out);
asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata,
batt_fault_out);
asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata,
sleep_conf);
asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata,
alt_function);
for (i = 0; i < num; i++) {
u8 alt, pin, dir, init, bank_num, bit_num;
u16 config = gpio_config[i];
pin = ASIC3_CONFIG_GPIO_PIN(config);
alt = ASIC3_CONFIG_GPIO_ALT(config);
dir = ASIC3_CONFIG_GPIO_DIR(config);
init = ASIC3_CONFIG_GPIO_INIT(config);
bank_num = ASIC3_GPIO_TO_BANK(pin);
bit_num = ASIC3_GPIO_TO_BIT(pin);
alt_reg[bank_num] |= (alt << bit_num);
out_reg[bank_num] |= (init << bit_num);
dir_reg[bank_num] |= (dir << bit_num);
}
for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) {
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) +
ASIC3_GPIO_Direction,
dir_reg[i]);
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_Out,
out_reg[i]);
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) +
ASIC3_GPIO_AltFunction,
alt_reg[i]);
}
return gpiochip_add(&asic->gpio);
......@@ -598,7 +583,9 @@ static int asic3_probe(struct platform_device *pdev)
asic->gpio.direction_input = asic3_gpio_direction_input;
asic->gpio.direction_output = asic3_gpio_direction_output;
ret = asic3_gpio_probe(pdev);
ret = asic3_gpio_probe(pdev,
pdata->gpio_config,
pdata->gpio_config_num);
if (ret < 0) {
printk(KERN_ERR "GPIO probe failed\n");
goto out_irq;
......
......@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*
* Copyright 2001 Compaq Computer Corporation.
* Copyright 2007 OpendHand.
* Copyright 2007-2008 OpenedHand Ltd.
*/
#ifndef __ASIC3_H__
......@@ -17,15 +17,8 @@
#include <linux/types.h>
struct asic3_platform_data {
struct {
u32 dir;
u32 init;
u32 sleep_mask;
u32 sleep_out;
u32 batt_fault_out;
u32 sleep_conf;
u32 alt_function;
} gpio_a, gpio_b, gpio_c, gpio_d;
u16 *gpio_config;
unsigned int gpio_config_num;
unsigned int bus_shift;
......@@ -86,6 +79,27 @@ struct asic3_platform_data {
*/
#define ASIC3_GPIO_Status 0x30 /* R Pin status */
/*
* ASIC3 GPIO config
*
* Bits 0..6 gpio number
* Bits 7..13 Alternate function
* Bit 14 Direction
* Bit 15 Initial value
*
*/
#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f)
#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7)
#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14)
#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15)
#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \
| (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \
| (((init) & 0x1) << 15))
#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \
ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init))
#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \
ASIC3_CONFIG_GPIO((gpio), 0, 1, (init))
#define ASIC3_SPI_Base 0x0400
#define ASIC3_SPI_Control 0x0000
#define ASIC3_SPI_TxData 0x0004
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册