MIPS: SEAD3: Probe parallel flash via DT

Probe the system parallel flash using device tree rather than platform
code, in order to reduce the amount of the latter.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14053/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/boot/dts/mti/sead3.dts

@@ -69,6 +69,30 @@
 		has-transaction-translator;
 	};
 
+	flash@1c000000 {
+		compatible = "intel,28f128j3", "cfi-flash";
+		reg = <0x1c000000 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			user-fs@0 {
+				label = "User FS";
+				reg = <0x0 0x1fc0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x1fc0000 0x40000>;
+			};
+		};
+	};
+
 	/* UART connected to FTDI & miniUSB socket */
 	uart0: uart@1f000900 {
 		compatible = "ns16550a";

arch/mips/mti-sead3/sead3-platform.c

@@ -8,44 +8,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/leds.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 
-static struct mtd_partition sead3_mtd_partitions[] = {
-	{
-		.name =		"User FS",
-		.offset =	0x00000000,
-		.size =		0x01fc0000,
-	}, {
-		.name =		"Board Config",
-		.offset =	0x01fc0000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE
-	},
-};
-
-static struct physmap_flash_data sead3_flash_data = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(sead3_mtd_partitions),
-	.parts		= sead3_mtd_partitions
-};
-
-static struct resource sead3_flash_resource = {
-	.start		= 0x1c000000,
-	.end		= 0x1dffffff,
-	.flags		= IORESOURCE_MEM
-};
-
-static struct platform_device sead3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sead3_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &sead3_flash_resource,
-};
-
 #define LEDFLAGS(bits, shift)		\
 	((bits << 8) | (shift << 8))
 
@@ -113,7 +77,6 @@ static struct platform_device sead3_led_device = {
 };
 
 static struct platform_device *sead3_platform_devices[] __initdata = {
-	&sead3_flash,
 	&pled_device,
 	&fled_device,
 	&sead3_led_device,