提交 3aa2ae74 编写于 作者: R Russ Dill 提交者: Greg Kroah-Hartman

USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.

'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) created a regression
with Beagleboard xM if booting the kernel after running 'usb start' under u-boot.

Finishing the reset before calling 'usb_add_hcd' fixes the regression. This is most likely due to
usb_add_hcd calling the driver's reset and init functions which expect the hardware to be
up and running.
Signed-off-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org> [3.4]
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 3cccc292
......@@ -242,15 +242,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
ehci_reset(omap_ehci);
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_err(dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
* PHY is settled and ready
......@@ -264,6 +255,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
gpio_set_value(pdata->reset_gpio_port[1], 1);
}
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_err(dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
return 0;
err_add_hcd:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册