x86/entry: Define 'cpu_current_top_of_stack' for 64-bit code

32-bit code has PER_CPU_VAR(cpu_current_top_of_stack).
64-bit code uses somewhat more obscure: PER_CPU_VAR(cpu_tss + TSS_sp0).

Define the 'cpu_current_top_of_stack' macro on CONFIG_X86_64
as well so that the PER_CPU_VAR(cpu_current_top_of_stack)
expression can be used in both 32-bit and 64-bit code.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1429889495-27850-3-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

arch/x86/ia32/ia32entry.S

@@ -113,7 +113,7 @@ ENTRY(ia32_sysenter_target)
 	 * it is too small to ever cause noticeable irq latency.
 	 */
 	SWAPGS_UNSAFE_STACK
-	movq	PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
+	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 	ENABLE_INTERRUPTS(CLBR_NONE)
 
 	/* Zero-extending 32-bit regs, do not remove */
@@ -346,7 +346,7 @@ ENTRY(ia32_cstar_target)
 	SWAPGS_UNSAFE_STACK
 	movl	%esp,%r8d
 	CFI_REGISTER	rsp,r8
-	movq	PER_CPU_VAR(cpu_tss + TSS_sp0),%rsp
+	movq	PER_CPU_VAR(cpu_current_top_of_stack),%rsp
 	ENABLE_INTERRUPTS(CLBR_NONE)
 
 	/* Zero-extending 32-bit regs, do not remove */

arch/x86/include/asm/thread_info.h

@@ -195,16 +195,14 @@ static inline unsigned long current_stack_pointer(void)
 
 #else /* !__ASSEMBLY__ */
 
+#ifdef CONFIG_X86_64
+# define cpu_current_top_of_stack (cpu_tss + TSS_sp0)
+#endif
+
 /* Load thread_info address into "reg" */
-#ifdef CONFIG_X86_32
 #define GET_THREAD_INFO(reg) \
 	_ASM_MOV PER_CPU_VAR(cpu_current_top_of_stack),reg ; \
 	_ASM_SUB $(THREAD_SIZE),reg ;
-#else
-#define GET_THREAD_INFO(reg) \
-	_ASM_MOV PER_CPU_VAR(cpu_tss + TSS_sp0),reg ; \
-	_ASM_SUB $(THREAD_SIZE),reg ;
-#endif
 
 /*
  * ASM operand which evaluates to a 'thread_info' address of

arch/x86/kernel/entry_64.S

@@ -216,7 +216,7 @@ ENTRY(system_call)
 GLOBAL(system_call_after_swapgs)
 
 	movq	%rsp,PER_CPU_VAR(rsp_scratch)
-	movq	PER_CPU_VAR(cpu_tss + TSS_sp0),%rsp
+	movq	PER_CPU_VAR(cpu_current_top_of_stack),%rsp
 
 	/* Construct struct pt_regs on stack */
 	pushq_cfi $__USER_DS			/* pt_regs->ss */

arch/x86/xen/xen-asm_64.S

@@ -16,6 +16,7 @@
 #include <asm/processor-flags.h>
 #include <asm/segment.h>
 #include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
 
 #include <xen/interface/xen.h>
 
@@ -54,7 +55,7 @@ ENTRY(xen_sysret64)
 	 * still with the kernel gs, so we can easily switch back
 	 */
 	movq %rsp, PER_CPU_VAR(rsp_scratch)
-	movq PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
+	movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
 	pushq $__USER_DS
 	pushq PER_CPU_VAR(rsp_scratch)
@@ -73,7 +74,7 @@ ENTRY(xen_sysret32)
 	 * still with the kernel gs, so we can easily switch back
 	 */
 	movq %rsp, PER_CPU_VAR(rsp_scratch)
-	movq PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
+	movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
 	pushq $__USER32_DS
 	pushq PER_CPU_VAR(rsp_scratch)