rt2x00: Use struct rt2x00_dev driver data in rt2800{pci,usb}.

Start using the struct rt2x00_dev driver data in rt2800 for the calibration
data.
Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800.h

@@ -2438,4 +2438,12 @@ struct mac_iveiv_entry {
  */
 #define EIRP_MAX_TX_POWER_LIMIT	0x50
 
+/*
+ * RT2800 driver data structure
+ */
+struct rt2800_drv_data {
+	u8 calibration_bw20;
+	u8 calibration_bw40;
+};
+
 #endif /* RT2800_H */

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -1645,6 +1645,7 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
 					 struct rf_channel *rf,
 					 struct channel_info *info)
 {
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u8 rfcsr, calib_tx, calib_rx;
 
 	rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
@@ -1714,8 +1715,13 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
 		calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f;
 		calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f;
 	} else {
-		calib_tx = rt2x00dev->calibration[conf_is_ht40(conf)];
-		calib_rx = rt2x00dev->calibration[conf_is_ht40(conf)];
+		if (conf_is_ht40(conf)) {
+			calib_tx = drv_data->calibration_bw40;
+			calib_rx = drv_data->calibration_bw40;
+		} else {
+			calib_tx = drv_data->calibration_bw20;
+			calib_rx = drv_data->calibration_bw20;
+		}
 	}
 
 	rt2800_rfcsr_read(rt2x00dev, 24, &rfcsr);
@@ -1743,6 +1749,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 					 struct rf_channel *rf,
 					 struct channel_info *info)
 {
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u8 rfcsr;
 	u32 reg;
 
@@ -1836,10 +1843,13 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
 	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
 
-	rt2800_rfcsr_write(rt2x00dev, 24,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
-	rt2800_rfcsr_write(rt2x00dev, 31,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+	if (conf_is_ht40(conf)) {
+		rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40);
+		rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40);
+	} else {
+		rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20);
+		rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20);
+	}
 
 	if (rf->channel <= 14) {
 		rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
@@ -3310,6 +3320,7 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
 
 static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 {
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u8 rfcsr;
 	u8 bbp;
 	u32 reg;
@@ -3598,17 +3609,17 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	 * Set RX Filter calibration for 20MHz and 40MHz
 	 */
 	if (rt2x00_rt(rt2x00dev, RT3070)) {
-		rt2x00dev->calibration[0] =
+		drv_data->calibration_bw20 =
 			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-		rt2x00dev->calibration[1] =
+		drv_data->calibration_bw40 =
 			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
 	} else if (rt2x00_rt(rt2x00dev, RT3071) ||
 		   rt2x00_rt(rt2x00dev, RT3090) ||
 		   rt2x00_rt(rt2x00dev, RT3390) ||
 		   rt2x00_rt(rt2x00dev, RT3572)) {
-		rt2x00dev->calibration[0] =
+		drv_data->calibration_bw20 =
 			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13);
-		rt2x00dev->calibration[1] =
+		drv_data->calibration_bw40 =
 			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15);
 	}
 

drivers/net/wireless/rt2x00/rt2800pci.c

@@ -1093,6 +1093,7 @@ static const struct data_queue_desc rt2800pci_queue_bcn = {
 
 static const struct rt2x00_ops rt2800pci_ops = {
 	.name			= KBUILD_MODNAME,
+	.drv_data_size		= sizeof(struct rt2800_drv_data),
 	.max_sta_intf		= 1,
 	.max_ap_intf		= 8,
 	.eeprom_size		= EEPROM_SIZE,

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -827,6 +827,7 @@ static const struct data_queue_desc rt2800usb_queue_bcn = {
 
 static const struct rt2x00_ops rt2800usb_ops = {
 	.name			= KBUILD_MODNAME,
+	.drv_data_size		= sizeof(struct rt2800_drv_data),
 	.max_sta_intf		= 1,
 	.max_ap_intf		= 8,
 	.eeprom_size		= EEPROM_SIZE,

drivers/net/wireless/rt2x00/rt2x00.h

@@ -896,13 +896,6 @@ struct rt2x00_dev {
 	 */
 	u8 freq_offset;
 
-	/*
-	 * Calibration information (for rt2800usb & rt2800pci).
-	 * [0] -> BW20
-	 * [1] -> BW40
-	 */
-	u8 calibration[2];
-
 	/*
 	 * Association id.
 	 */