kconfig: fix path to modules.txt in Kconfig help

Documentation/modules.txt doesn't exist, but
Documentation/kbuild/modules.txt does.

Signed-off-by: Alexander E. Patrakov
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

drivers/mtd/devices/Kconfig

@@ -49,8 +49,8 @@ config MTD_MS02NV
 
 	  If you want to compile this driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/modules.txt>.  The module will
-	  be called ms02-nv.o.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+	  The module will be called ms02-nv.ko.
 
 config MTD_DATAFLASH
 	tristate "Support for AT45xxx DataFlash"

drivers/net/Kconfig

@@ -833,8 +833,8 @@ config SMC91X
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
 	  The module will be called smc91x.  If you want to compile it as a
-	  module, say M here and read <file:Documentation/modules.txt> as well
-	  as <file:Documentation/networking/net-modules.txt>.
+	  module, say M here and read <file:Documentation/kbuild/modules.txt>
+	  as well as <file:Documentation/networking/net-modules.txt>.
 
 config SMC9194
 	tristate "SMC 9194 support"
@@ -889,7 +889,7 @@ config SMC911X
 
 	  This driver is also available as a module. The module will be 
 	  called smc911x.  If you want to compile it as a module, say M 
-	  here and read <file:Documentation/modules.txt>
+	  here and read <file:Documentation/kbuild/modules.txt>
 
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"

drivers/net/wireless/Kconfig

@@ -153,8 +153,8 @@ config IPW2100
  
           If you want to compile the driver as a module ( = code which can be
           inserted in and removed from the running kernel whenever you want),
-          say M here and read <file:Documentation/modules.txt>.  The module
-          will be called ipw2100.ko.
+          say M here and read <file:Documentation/kbuild/modules.txt>.
+          The module will be called ipw2100.ko.
 	
 config IPW2100_MONITOR
         bool "Enable promiscuous mode"
@@ -208,8 +208,8 @@ config IPW2200
  
           If you want to compile the driver as a module ( = code which can be
           inserted in and removed from the running kernel whenever you want),
-          say M here and read <file:Documentation/modules.txt>.  The module
-          will be called ipw2200.ko.
+          say M here and read <file:Documentation/kbuild/modules.txt>.
+          The module will be called ipw2200.ko.
 
 config IPW2200_MONITOR
         bool "Enable promiscuous mode"
@@ -517,8 +517,8 @@ config PRISM54
 	  
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/modules.txt>.  The module
-	  will be called prism54.ko.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+	  The module will be called prism54.ko.
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"

drivers/scsi/Kconfig

@@ -170,7 +170,7 @@ config CHR_DEV_SCH
 	
 	  If you want to compile this as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/modules.txt> and
+	  say M here and read <file:Documentation/kbuild/modules.txt> and
 	  <file:Documentation/scsi.txt>. The module will be called ch.o.
 	  If unsure, say N.
 	
@@ -1793,7 +1793,7 @@ config ZFCP
 
           This driver is also available as a module. This module will be
           called zfcp. If you want to compile it as a module, say M here
-          and read <file:Documentation/modules.txt>.
+          and read <file:Documentation/kbuild/modules.txt>.
 
 config SCSI_SRP
 	tristate "SCSI RDMA Protocol helper library"

drivers/video/Kconfig

@@ -191,7 +191,7 @@ config FB_ARMCLCD
 
 	  If you want to compile this as a module (=code which can be
 	  inserted into and removed from the running kernel), say M
-	  here and read <file:Documentation/modules.txt>.  The module
+	  here and read <file:Documentation/kbuild/modules.txt>.  The module
 	  will be called amba-clcd.
 
 choice
@@ -1491,7 +1491,7 @@ config FB_PXA
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
 	  module will be called pxafb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/modules.txt>.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
 
 	  If unsure, say N.
 
@@ -1544,7 +1544,7 @@ config FB_W100
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
 	  module will be called w100fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/modules.txt>.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
 
 	  If unsure, say N.
 
@@ -1561,7 +1561,7 @@ config FB_S3C2410
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
 	  module will be called s3c2410fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/modules.txt>.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
 
 	  If unsure, say N.
 config FB_S3C2410_DEBUG

net/ipv6/netfilter/Kconfig

@@ -198,7 +198,7 @@ config IP6_NF_RAW
 	  and OUTPUT chains.
 	
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 endmenu
 

net/netfilter/Kconfig

@@ -100,7 +100,7 @@ config NF_CT_PROTO_SCTP
 	  tracking code will be able to do state tracking on SCTP connections.
 
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NF_CONNTRACK_AMANDA
 	tristate "Amanda backup protocol support"
@@ -279,8 +279,8 @@ config NETFILTER_XT_TARGET_CONNMARK
 	  affects the connection mark value rather than the packet mark value.
 	
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  The module will be called
-	  ipt_CONNMARK.o.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  The module will be called
+	  ipt_CONNMARK.ko.  If unsure, say `N'.
 
 config NETFILTER_XT_TARGET_DSCP
 	tristate '"DSCP" target support'
@@ -341,7 +341,7 @@ config NETFILTER_XT_TARGET_NOTRACK
 	  no protocol helpers for the selected packets).
 	
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NETFILTER_XT_TARGET_SECMARK
 	tristate '"SECMARK" target support'
@@ -397,7 +397,7 @@ config NETFILTER_XT_MATCH_COMMENT
 	  comments in your iptables ruleset.
 
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_CONNBYTES
 	tristate  '"connbytes" per-connection counter match support'
@@ -409,7 +409,7 @@ config NETFILTER_XT_MATCH_CONNBYTES
 	  number of bytes and/or packets for each direction within a connection.
 
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_CONNMARK
 	tristate  '"connmark" connection mark match support'
@@ -421,8 +421,8 @@ config NETFILTER_XT_MATCH_CONNMARK
 	  connection mark value previously set for the session by `CONNMARK'. 
 	
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  The module will be called
-	  ipt_connmark.o.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  The module will be called
+	  ipt_connmark.ko.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_CONNTRACK
 	tristate '"conntrack" connection tracking match support'
@@ -446,7 +446,7 @@ config NETFILTER_XT_MATCH_DCCP
 	  and DCCP flags.
 
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_DSCP
 	tristate '"DSCP" match support'
@@ -565,7 +565,7 @@ config NETFILTER_XT_MATCH_QUOTA
 	  byte counter.
 
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_REALM
 	tristate  '"realm" match support'
@@ -579,7 +579,7 @@ config NETFILTER_XT_MATCH_REALM
 	  in tc world.
 	
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_SCTP
 	tristate  '"sctp" protocol match support (EXPERIMENTAL)'
@@ -590,7 +590,7 @@ config NETFILTER_XT_MATCH_SCTP
 	  and SCTP chunk types.
 
 	  If you want to compile it as a module, say M here and read
-	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_STATE
 	tristate '"state" match support'

net/tipc/Kconfig

@@ -18,7 +18,7 @@ config TIPC
 	  This protocol support is also available as a module ( = code which
 	  can be inserted in and removed from the running kernel whenever you
 	  want). The module will be called tipc. If you want to compile it
-	  as a module, say M here and read <file:Documentation/modules.txt>.
+	  as a module, say M here and read <file:Documentation/kbuild/modules.txt>.
 
 	  If in doubt, say N.