提交 39c2bd78 编写于 作者: H Heiko Stuebner

ARM: dts: rockchip: add Cortex-A9 SPI controller nodes

This adds basic spi nodes and pinctrl settings to the rk3066 and rk3188
devicetree files.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
上级 f1c8547f
......@@ -238,6 +238,42 @@
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_tx: spi0-tx {
rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_rx: spi0-rx {
rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_rx: spi1-rx {
rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_tx: spi1-tx {
rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
};
spi1_cs1: spi1-cs1 {
rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
......@@ -406,6 +442,16 @@
pinctrl-0 = <&pwm3_out>;
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
......
......@@ -206,6 +206,42 @@
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>;
};
spi1_cs1: spi1-cs1 {
rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
......@@ -381,6 +417,18 @@
pinctrl-0 = <&pwm3_out>;
};
&spi0 {
compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
};
&spi1 {
compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
......
......@@ -26,6 +26,8 @@
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
spi0 = &spi0;
spi1 = &spi1;
};
xin24m: oscillator {
......@@ -291,4 +293,26 @@
clock-names = "saradc", "apb_pclk";
status = "disabled";
};
spi0: spi@20070000 {
compatible = "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x20070000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@20074000 {
compatible = "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x20074000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册