nios2: Assembly macros and definitions

This patch add assembly macros and definitions used in
the .S files across arch/nios2/ and together with asm-offsets.c.
Signed-off-by: NLey Foon Tan <lftan@altera.com>

arch/nios2/include/asm/asm-macros.h

+/*
+ * Macro used to simplify coding multi-line assembler.
+ * Some of the bit test macro can simplify down to one line
+ * depending on the mask value.
+ *
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ */
+#ifndef _ASM_NIOS2_ASMMACROS_H
+#define _ASM_NIOS2_ASMMACROS_H
+/*
+ * ANDs reg2 with mask and places the result in reg1.
+ *
+ * You cannnot use the same register for reg1 & reg2.
+ */
+
+.macro ANDI32	reg1, reg2, mask
+.if \mask & 0xffff
+	.if \mask & 0xffff0000
+		movhi	\reg1, %hi(\mask)
+		movui	\reg1, %lo(\mask)
+		and	\reg1, \reg1, \reg2
+	.else
+		andi	\reg1, \reg2, %lo(\mask)
+	.endif
+.else
+	andhi	\reg1, \reg2, %hi(\mask)
+.endif
+.endm
+
+/*
+ * ORs reg2 with mask and places the result in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro ORI32	reg1, reg2, mask
+.if \mask & 0xffff
+	.if \mask & 0xffff0000
+		orhi	\reg1, \reg2, %hi(\mask)
+		ori	\reg1, \reg2, %lo(\mask)
+	.else
+		ori	\reg1, \reg2, %lo(\mask)
+	.endif
+.else
+	orhi	\reg1, \reg2, %hi(\mask)
+.endif
+.endm
+
+/*
+ * XORs reg2 with mask and places the result in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro XORI32	reg1, reg2, mask
+.if \mask & 0xffff
+	.if \mask & 0xffff0000
+		xorhi	\reg1, \reg2, %hi(\mask)
+		xori	\reg1, \reg1, %lo(\mask)
+	.else
+		xori	\reg1, \reg2, %lo(\mask)
+	.endif
+.else
+	xorhi	\reg1, \reg2, %hi(\mask)
+.endif
+.endm
+
+/*
+ * This is a support macro for BTBZ & BTBNZ.  It checks
+ * the bit to make sure it is valid 32 value.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro BT	reg1, reg2, bit
+.if \bit > 31
+	.err
+.else
+	.if \bit < 16
+		andi	\reg1, \reg2, (1 << \bit)
+	.else
+		andhi	\reg1, \reg2, (1 << (\bit - 16))
+	.endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and branches to label if the
+ * bit is zero.  The result of the bit test is stored in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTBZ	reg1, reg2, bit, label
+	BT	\reg1, \reg2, \bit
+	beq	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and branches to label if the
+ * bit is non-zero.  The result of the bit test is stored in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTBNZ	reg1, reg2, bit, label
+	BT	\reg1, \reg2, \bit
+	bne	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then compliments the bit in reg2.
+ * The result of the bit test is stored in reg1.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTC	reg1, reg2, bit
+.if \bit > 31
+	.err
+.else
+	.if \bit < 16
+		andi	\reg1, \reg2, (1 << \bit)
+		xori	\reg2, \reg2, (1 << \bit)
+	.else
+		andhi	\reg1, \reg2, (1 << (\bit - 16))
+		xorhi	\reg2, \reg2, (1 << (\bit - 16))
+	.endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and then sets the bit in reg2.
+ * The result of the bit test is stored in reg1.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTS	reg1, reg2, bit
+.if \bit > 31
+	.err
+.else
+	.if \bit < 16
+		andi	\reg1, \reg2, (1 << \bit)
+		ori	\reg2, \reg2, (1 << \bit)
+	.else
+		andhi	\reg1, \reg2, (1 << (\bit - 16))
+		orhi	\reg2, \reg2, (1 << (\bit - 16))
+	.endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and then resets the bit in reg2.
+ * The result of the bit test is stored in reg1.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTR	reg1, reg2, bit
+.if \bit > 31
+	.err
+.else
+	.if \bit < 16
+		andi	\reg1, \reg2, (1 << \bit)
+		andi	\reg2, \reg2, %lo(~(1 << \bit))
+	.else
+		andhi	\reg1, \reg2, (1 << (\bit - 16))
+		andhi	\reg2, \reg2, %lo(~(1 << (\bit - 16)))
+	.endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and then compliments the bit in reg2.
+ * The result of the bit test is stored in reg1.  If the
+ * original bit was zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTCBZ	reg1, reg2, bit, label
+	BTC	\reg1, \reg2, \bit
+	beq	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then compliments the bit in reg2.
+ * The result of the bit test is stored in reg1.  If the
+ * original bit was non-zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTCBNZ	reg1, reg2, bit, label
+	BTC	\reg1, \reg2, \bit
+	bne	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then sets the bit in reg2.
+ * The result of the bit test is stored in reg1.  If the
+ * original bit was zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTSBZ	reg1, reg2, bit, label
+	BTS	\reg1, \reg2, \bit
+	beq	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then sets the bit in reg2.
+ * The result of the bit test is stored in reg1.  If the
+ * original bit was non-zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTSBNZ	reg1, reg2, bit, label
+	BTS	\reg1, \reg2, \bit
+	bne	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then resets the bit in reg2.
+ * The result of the bit test is stored in reg1.  If the
+ * original bit was zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTRBZ	reg1, reg2, bit, label
+	BTR	\reg1, \reg2, \bit
+	bne	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then resets the bit in reg2.
+ * The result of the bit test is stored in reg1.  If the
+ * original bit was non-zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTRBNZ	reg1, reg2, bit, label
+	BTR	\reg1, \reg2, \bit
+	bne	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bits in mask against reg2 stores the result in reg1.
+ * If the all the bits in the mask are zero it branches to label.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro TSTBZ	reg1, reg2, mask, label
+	ANDI32	\reg1, \reg2, \mask
+	beq	\reg1, r0, \label
+.endm
+
+/*
+ * Tests the bits in mask against reg2 stores the result in reg1.
+ * If the any of the bits in the mask are 1 it branches to label.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro TSTBNZ	reg1, reg2, mask, label
+	ANDI32	\reg1, \reg2, \mask
+	bne	\reg1, r0, \label
+.endm
+
+/*
+ * Pushes reg onto the stack.
+ */
+
+.macro PUSH	reg
+	addi	sp, sp, -4
+	stw	\reg, 0(sp)
+.endm
+
+/*
+ * Pops the top of the stack into reg.
+ */
+
+.macro POP	reg
+	ldw	\reg, 0(sp)
+	addi	sp, sp, 4
+.endm
+
+
+#endif /* _ASM_NIOS2_ASMMACROS_H */

arch/nios2/include/asm/asm-offsets.h

+/*
+ *  Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ *  Copyright (C) 2009 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <generated/asm-offsets.h>

arch/nios2/kernel/asm-offsets.c

+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+
+int main(void)
+{
+	/* struct task_struct */
+	OFFSET(TASK_THREAD, task_struct, thread);
+	BLANK();
+
+	/* struct thread_struct */
+	OFFSET(THREAD_KSP, thread_struct, ksp);
+	OFFSET(THREAD_KPSR, thread_struct, kpsr);
+	BLANK();
+
+	/* struct pt_regs */
+	OFFSET(PT_ORIG_R2, pt_regs, orig_r2);
+	OFFSET(PT_ORIG_R7, pt_regs, orig_r7);
+
+	OFFSET(PT_R1, pt_regs, r1);
+	OFFSET(PT_R2, pt_regs, r2);
+	OFFSET(PT_R3, pt_regs, r3);
+	OFFSET(PT_R4, pt_regs, r4);
+	OFFSET(PT_R5, pt_regs, r5);
+	OFFSET(PT_R6, pt_regs, r6);
+	OFFSET(PT_R7, pt_regs, r7);
+	OFFSET(PT_R8, pt_regs, r8);
+	OFFSET(PT_R9, pt_regs, r9);
+	OFFSET(PT_R10, pt_regs, r10);
+	OFFSET(PT_R11, pt_regs, r11);
+	OFFSET(PT_R12, pt_regs, r12);
+	OFFSET(PT_R13, pt_regs, r13);
+	OFFSET(PT_R14, pt_regs, r14);
+	OFFSET(PT_R15, pt_regs, r15);
+	OFFSET(PT_EA, pt_regs, ea);
+	OFFSET(PT_RA, pt_regs, ra);
+	OFFSET(PT_FP, pt_regs, fp);
+	OFFSET(PT_SP, pt_regs, sp);
+	OFFSET(PT_GP, pt_regs, gp);
+	OFFSET(PT_ESTATUS, pt_regs, estatus);
+	DEFINE(PT_REGS_SIZE, sizeof(struct pt_regs));
+	BLANK();
+
+	/* struct switch_stack */
+	OFFSET(SW_R16, switch_stack, r16);
+	OFFSET(SW_R17, switch_stack, r17);
+	OFFSET(SW_R18, switch_stack, r18);
+	OFFSET(SW_R19, switch_stack, r19);
+	OFFSET(SW_R20, switch_stack, r20);
+	OFFSET(SW_R21, switch_stack, r21);
+	OFFSET(SW_R22, switch_stack, r22);
+	OFFSET(SW_R23, switch_stack, r23);
+	OFFSET(SW_FP, switch_stack, fp);
+	OFFSET(SW_GP, switch_stack, gp);
+	OFFSET(SW_RA, switch_stack, ra);
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
+	BLANK();
+
+	/* struct thread_info */
+	OFFSET(TI_TASK, thread_info, task);
+	OFFSET(TI_FLAGS, thread_info, flags);
+	OFFSET(TI_PREEMPT_COUNT, thread_info, preempt_count);
+	BLANK();
+
+	return 0;
+}