提交 397c657a 编写于 作者: O Omer Efrat 提交者: Johannes Berg

cfg80211: use BIT_ULL for NL80211_STA_INFO_* attribute types

The BIT macro uses unsigned long which some architectures handle as 32 bit
and therefore might cause macro's shift to overflow when used on a value
equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards).

Since 'filled' member in station_info changed to u64, BIT_ULL macro
should be used with all NL80211_STA_INFO_* attribute types instead of BIT
to prevent future possible bugs when one will use BIT macro for higher
attributes by mistake.

This commit cleans up all usages of BIT macro with the above field
in cfg80211 by changing it to BIT_ULL instead. In addition, there are
some places which don't use BIT nor BIT_ULL macros so align those as well.
Signed-off-by: NOmer Efrat <omer.efrat@tandemg.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
上级 f0c0407d
......@@ -4619,13 +4619,13 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
#define PUT_SINFO(attr, memb, type) do { \
BUILD_BUG_ON(sizeof(type) == sizeof(u64)); \
if (sinfo->filled & (1ULL << NL80211_STA_INFO_ ## attr) && \
if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_ ## attr) && \
nla_put_ ## type(msg, NL80211_STA_INFO_ ## attr, \
sinfo->memb)) \
goto nla_put_failure; \
} while (0)
#define PUT_SINFO_U64(attr, memb) do { \
if (sinfo->filled & (1ULL << NL80211_STA_INFO_ ## attr) && \
if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_ ## attr) && \
nla_put_u64_64bit(msg, NL80211_STA_INFO_ ## attr, \
sinfo->memb, NL80211_STA_INFO_PAD)) \
goto nla_put_failure; \
......@@ -4634,14 +4634,14 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
PUT_SINFO(CONNECTED_TIME, connected_time, u32);
PUT_SINFO(INACTIVE_TIME, inactive_time, u32);
if (sinfo->filled & (BIT(NL80211_STA_INFO_RX_BYTES) |
BIT(NL80211_STA_INFO_RX_BYTES64)) &&
if (sinfo->filled & (BIT_ULL(NL80211_STA_INFO_RX_BYTES) |
BIT_ULL(NL80211_STA_INFO_RX_BYTES64)) &&
nla_put_u32(msg, NL80211_STA_INFO_RX_BYTES,
(u32)sinfo->rx_bytes))
goto nla_put_failure;
if (sinfo->filled & (BIT(NL80211_STA_INFO_TX_BYTES) |
BIT(NL80211_STA_INFO_TX_BYTES64)) &&
if (sinfo->filled & (BIT_ULL(NL80211_STA_INFO_TX_BYTES) |
BIT_ULL(NL80211_STA_INFO_TX_BYTES64)) &&
nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES,
(u32)sinfo->tx_bytes))
goto nla_put_failure;
......@@ -4661,24 +4661,24 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
default:
break;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_CHAIN_SIGNAL)) {
if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL)) {
if (!nl80211_put_signal(msg, sinfo->chains,
sinfo->chain_signal,
NL80211_STA_INFO_CHAIN_SIGNAL))
goto nla_put_failure;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_CHAIN_SIGNAL_AVG)) {
if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL_AVG)) {
if (!nl80211_put_signal(msg, sinfo->chains,
sinfo->chain_signal_avg,
NL80211_STA_INFO_CHAIN_SIGNAL_AVG))
goto nla_put_failure;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_TX_BITRATE)) {
if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_TX_BITRATE)) {
if (!nl80211_put_sta_rate(msg, &sinfo->txrate,
NL80211_STA_INFO_TX_BITRATE))
goto nla_put_failure;
}
if (sinfo->filled & BIT(NL80211_STA_INFO_RX_BITRATE)) {
if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_RX_BITRATE)) {
if (!nl80211_put_sta_rate(msg, &sinfo->rxrate,
NL80211_STA_INFO_RX_BITRATE))
goto nla_put_failure;
......@@ -4694,7 +4694,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
PUT_SINFO(PEER_PM, peer_pm, u32);
PUT_SINFO(NONPEER_PM, nonpeer_pm, u32);
if (sinfo->filled & BIT(NL80211_STA_INFO_BSS_PARAM)) {
if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_BSS_PARAM)) {
bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM);
if (!bss_param)
goto nla_put_failure;
......@@ -4713,7 +4713,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
nla_nest_end(msg, bss_param);
}
if ((sinfo->filled & BIT(NL80211_STA_INFO_STA_FLAGS)) &&
if ((sinfo->filled & BIT_ULL(NL80211_STA_INFO_STA_FLAGS)) &&
nla_put(msg, NL80211_STA_INFO_STA_FLAGS,
sizeof(struct nl80211_sta_flag_update),
&sinfo->sta_flags))
......@@ -10266,7 +10266,7 @@ static int cfg80211_cqm_rssi_update(struct cfg80211_registered_device *rdev,
if (err)
return err;
if (sinfo.filled & BIT(NL80211_STA_INFO_BEACON_SIGNAL_AVG))
if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_BEACON_SIGNAL_AVG))
wdev->cqm_config->last_rssi_event_value =
(s8) sinfo.rx_beacon_signal_avg;
}
......
......@@ -1278,7 +1278,7 @@ static int cfg80211_wext_giwrate(struct net_device *dev,
if (err)
return err;
if (!(sinfo.filled & BIT(NL80211_STA_INFO_TX_BITRATE)))
if (!(sinfo.filled & BIT_ULL(NL80211_STA_INFO_TX_BITRATE)))
return -EOPNOTSUPP;
rate->value = 100000 * cfg80211_calculate_bitrate(&sinfo.txrate);
......@@ -1320,7 +1320,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
switch (rdev->wiphy.signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
if (sinfo.filled & BIT(NL80211_STA_INFO_SIGNAL)) {
if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_SIGNAL)) {
int sig = sinfo.signal;
wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
......@@ -1334,7 +1334,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
break;
}
case CFG80211_SIGNAL_TYPE_UNSPEC:
if (sinfo.filled & BIT(NL80211_STA_INFO_SIGNAL)) {
if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_SIGNAL)) {
wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
wstats.qual.level = sinfo.signal;
......@@ -1347,9 +1347,9 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
}
wstats.qual.updated |= IW_QUAL_NOISE_INVALID;
if (sinfo.filled & BIT(NL80211_STA_INFO_RX_DROP_MISC))
if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC))
wstats.discard.misc = sinfo.rx_dropped_misc;
if (sinfo.filled & BIT(NL80211_STA_INFO_TX_FAILED))
if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_TX_FAILED))
wstats.discard.retries = sinfo.tx_failed;
return &wstats;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册