alim15x3: use ide_tune_dma()

Use ide_tune_dma() in ali15x3_config_drive_for_dma() and remove all the open
coded DMA tuning code and also config_chipset_for_dma().  Set ->atapi_dma flag
correctly in init_hwif_common_ali15x3() so ide_tune_dma() can take care of
checking if ATAPI DMA is allowed and remove open coded ATAPI DMA check from
ali15x3_config_drive_for_dma().

There should be no functionality changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 6b8cf772
......@@ -455,28 +455,6 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return (ide_config_drive_speed(drive, speed));
}
/**
* config_chipset_for_dma - set up DMA mode
* @drive: drive to configure for
*
* Place a drive into DMA mode and tune the chipset for
* the selected speed.
*
* Returns true if DMA mode can be used
*/
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (!(speed))
return 0;
(void) ali15x3_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
/**
* ali15x3_config_drive_for_dma - configure for DMA
* @drive: drive to configure
......@@ -487,48 +465,14 @@ static int config_chipset_for_dma (ide_drive_t *drive)
static int ali15x3_config_drive_for_dma(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
if ((m5229_revision<=0x20) && (drive->media!=ide_disk))
goto ata_pio;
drive->init_speed = 0;
if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) {
/* Consult the list of known "bad" drives */
if (__ide_dma_bad_drive(drive))
goto ata_pio;
if ((id->field_valid & 4) && (m5229_revision >= 0xC2)) {
if (id->dma_ultra & hwif->ultra_mask) {
/* Force if Capable UltraDMA */
int dma = config_chipset_for_dma(drive);
if ((id->field_valid & 2) && !dma)
goto try_dma_modes;
}
} else if (id->field_valid & 2) {
try_dma_modes:
if ((id->dma_mword & hwif->mwdma_mask) ||
(id->dma_1word & hwif->swdma_mask)) {
/* Force if Capable regular DMA modes */
if (!config_chipset_for_dma(drive))
goto ata_pio;
}
} else if (__ide_dma_good_drive(drive) &&
(id->eide_dma_time < 150)) {
/* Consult the list of known "good" drives */
if (!config_chipset_for_dma(drive))
goto ata_pio;
} else {
goto ata_pio;
}
} else {
ata_pio:
hwif->tuneproc(drive, 255);
return -1;
}
if (ide_tune_dma(drive))
return 0;
return 0;
ali15x3_tune_drive(drive, 255);
return -1;
}
/**
......@@ -739,7 +683,8 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
return;
}
hwif->atapi_dma = 1;
if (m5229_revision > 0x20)
hwif->atapi_dma = 1;
if (m5229_revision <= 0x20)
hwif->ultra_mask = 0x00; /* no udma */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册