提交 380c09f6 编写于 作者: L Lars-Peter Clausen 提交者: Samuel Ortiz

mfd: Move pcf50633 irq related functions to its own file.

This reduces code clutter a bit and will ease an migration to genirq.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
上级 f7b2a77f
......@@ -57,7 +57,8 @@ obj-$(CONFIG_PMIC_DA903X) += da903x.o
max8925-objs := max8925-core.o max8925-i2c.o
obj-$(CONFIG_MFD_MAX8925) += max8925.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o pcf50633-irq.o
pcf50633-objs := pcf50633-core.o pcf50633-irq.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
......
......@@ -21,16 +21,16 @@
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/mfd/pcf50633/core.h>
/* Two MBCS registers used during cold start */
#define PCF50633_REG_MBCS1 0x4b
#define PCF50633_REG_MBCS2 0x4c
#define PCF50633_MBCS1_USBPRES 0x01
#define PCF50633_MBCS1_ADAPTPRES 0x01
int pcf50633_irq_init(struct pcf50633 *pcf, int irq);
void pcf50633_irq_free(struct pcf50633 *pcf);
#ifdef CONFIG_PM
int pcf50633_irq_suspend(struct pcf50633 *pcf);
int pcf50633_irq_resume(struct pcf50633 *pcf);
#endif
static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
{
......@@ -215,228 +215,6 @@ static struct attribute_group pcf_attr_group = {
.attrs = pcf_sysfs_entries,
};
int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
void (*handler) (int, void *), void *data)
{
if (irq < 0 || irq >= PCF50633_NUM_IRQ || !handler)
return -EINVAL;
if (WARN_ON(pcf->irq_handler[irq].handler))
return -EBUSY;
mutex_lock(&pcf->lock);
pcf->irq_handler[irq].handler = handler;
pcf->irq_handler[irq].data = data;
mutex_unlock(&pcf->lock);
return 0;
}
EXPORT_SYMBOL_GPL(pcf50633_register_irq);
int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
{
if (irq < 0 || irq >= PCF50633_NUM_IRQ)
return -EINVAL;
mutex_lock(&pcf->lock);
pcf->irq_handler[irq].handler = NULL;
mutex_unlock(&pcf->lock);
return 0;
}
EXPORT_SYMBOL_GPL(pcf50633_free_irq);
static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
{
u8 reg, bits, tmp;
int ret = 0, idx;
idx = irq >> 3;
reg = PCF50633_REG_INT1M + idx;
bits = 1 << (irq & 0x07);
mutex_lock(&pcf->lock);
if (mask) {
ret = __pcf50633_read(pcf, reg, 1, &tmp);
if (ret < 0)
goto out;
tmp |= bits;
ret = __pcf50633_write(pcf, reg, 1, &tmp);
if (ret < 0)
goto out;
pcf->mask_regs[idx] &= ~bits;
pcf->mask_regs[idx] |= bits;
} else {
ret = __pcf50633_read(pcf, reg, 1, &tmp);
if (ret < 0)
goto out;
tmp &= ~bits;
ret = __pcf50633_write(pcf, reg, 1, &tmp);
if (ret < 0)
goto out;
pcf->mask_regs[idx] &= ~bits;
}
out:
mutex_unlock(&pcf->lock);
return ret;
}
int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
{
dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
return __pcf50633_irq_mask_set(pcf, irq, 1);
}
EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
{
dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
return __pcf50633_irq_mask_set(pcf, irq, 0);
}
EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
{
u8 reg, bits;
reg = irq >> 3;
bits = 1 << (irq & 0x07);
return pcf->mask_regs[reg] & bits;
}
EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
{
if (pcf->irq_handler[irq].handler)
pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
}
/* Maximum amount of time ONKEY is held before emergency action is taken */
#define PCF50633_ONKEY1S_TIMEOUT 8
static irqreturn_t pcf50633_irq(int irq, void *data)
{
struct pcf50633 *pcf = data;
int ret, i, j;
u8 pcf_int[5], chgstat;
/* Read the 5 INT regs in one transaction */
ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
ARRAY_SIZE(pcf_int), pcf_int);
if (ret != ARRAY_SIZE(pcf_int)) {
dev_err(pcf->dev, "Error reading INT registers\n");
/*
* If this doesn't ACK the interrupt to the chip, we'll be
* called once again as we're level triggered.
*/
goto out;
}
/* defeat 8s death from lowsys on A5 */
pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04);
/* We immediately read the usb and adapter status. We thus make sure
* only of USBINS/USBREM IRQ handlers are called */
if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
if (chgstat & (0x3 << 4))
pcf_int[0] &= ~PCF50633_INT1_USBREM;
else
pcf_int[0] &= ~PCF50633_INT1_USBINS;
}
/* Make sure only one of ADPINS or ADPREM is set */
if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
if (chgstat & (0x3 << 4))
pcf_int[0] &= ~PCF50633_INT1_ADPREM;
else
pcf_int[0] &= ~PCF50633_INT1_ADPINS;
}
dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
"INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
/* Some revisions of the chip don't have a 8s standby mode on
* ONKEY1S press. We try to manually do it in such cases. */
if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
pcf->onkey1s_held);
if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
if (pcf->pdata->force_shutdown)
pcf->pdata->force_shutdown(pcf);
}
if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
dev_info(pcf->dev, "ONKEY1S held\n");
pcf->onkey1s_held = 1 ;
/* Unmask IRQ_SECOND */
pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
PCF50633_INT1_SECOND);
/* Unmask IRQ_ONKEYR */
pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
PCF50633_INT2_ONKEYR);
}
if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
pcf->onkey1s_held = 0;
/* Mask SECOND and ONKEYR interrupts */
if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
pcf50633_reg_set_bit_mask(pcf,
PCF50633_REG_INT1M,
PCF50633_INT1_SECOND,
PCF50633_INT1_SECOND);
if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
pcf50633_reg_set_bit_mask(pcf,
PCF50633_REG_INT2M,
PCF50633_INT2_ONKEYR,
PCF50633_INT2_ONKEYR);
}
/* Have we just resumed ? */
if (pcf->is_suspended) {
pcf->is_suspended = 0;
/* Set the resume reason filtering out non resumers */
for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
pcf->resume_reason[i] = pcf_int[i] &
pcf->pdata->resumers[i];
/* Make sure we don't pass on any ONKEY events to
* userspace now */
pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
}
for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
/* Unset masked interrupts */
pcf_int[i] &= ~pcf->mask_regs[i];
for (j = 0; j < 8 ; j++)
if (pcf_int[i] & (1 << j))
pcf50633_irq_call_handler(pcf, (i * 8) + j);
}
out:
return IRQ_HANDLED
}
static void
pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
struct platform_device **pdev)
......@@ -463,58 +241,17 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
{
struct pcf50633 *pcf;
int ret = 0, i;
u8 res[5];
pcf = i2c_get_clientdata(client);
/* Make sure our interrupt handlers are not called
* henceforth */
disable_irq(pcf->irq);
/* Save the masks */
ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
ARRAY_SIZE(pcf->suspend_irq_masks),
pcf->suspend_irq_masks);
if (ret < 0) {
dev_err(pcf->dev, "error saving irq masks\n");
goto out;
}
/* Write wakeup irq masks */
for (i = 0; i < ARRAY_SIZE(res); i++)
res[i] = ~pcf->pdata->resumers[i];
ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
ARRAY_SIZE(res), &res[0]);
if (ret < 0) {
dev_err(pcf->dev, "error writing wakeup irq masks\n");
goto out;
}
pcf->is_suspended = 1;
out:
return ret;
return pcf50633_irq_suspend(pcf);
}
static int pcf50633_resume(struct i2c_client *client)
{
struct pcf50633 *pcf;
int ret;
pcf = i2c_get_clientdata(client);
/* Write the saved mask registers */
ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
ARRAY_SIZE(pcf->suspend_irq_masks),
pcf->suspend_irq_masks);
if (ret < 0)
dev_err(pcf->dev, "Error restoring saved suspend masks\n");
enable_irq(pcf->irq);
return 0;
return pcf50633_irq_resume(pcf);
}
#else
#define pcf50633_suspend NULL
......@@ -545,7 +282,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
i2c_set_clientdata(client, pcf);
pcf->dev = &client->dev;
pcf->i2c_client = client;
pcf->irq = client->irq;
version = pcf50633_reg_read(pcf, 0);
variant = pcf50633_reg_read(pcf, 1);
......@@ -558,22 +294,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
dev_info(pcf->dev, "Probed device version %d variant %d\n",
version, variant);
/* Enable all interrupts except RTC SECOND */
pcf->mask_regs[0] = 0x80;
pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
ret = request_threaded_irq(client->irq, NULL, pcf50633_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"pcf50633", pcf);
if (ret) {
dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
goto err_free;
}
pcf50633_irq_init(pcf, client->irq);
/* Create sub devices */
pcf50633_client_dev_register(pcf, "pcf50633-input",
......@@ -605,10 +326,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
platform_device_add(pdev);
}
if (enable_irq_wake(client->irq) < 0)
dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
"in this hardware revision", client->irq);
ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
if (ret)
dev_err(pcf->dev, "error creating sysfs entries\n");
......@@ -630,7 +347,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
struct pcf50633 *pcf = i2c_get_clientdata(client);
int i;
free_irq(pcf->irq, pcf);
pcf50633_irq_free(pcf);
platform_device_unregister(pcf->input_pdev);
platform_device_unregister(pcf->rtc_pdev);
......
/* NXP PCF50633 Power Management Unit (PMU) driver
*
* (C) 2006-2008 by Openmoko, Inc.
* Author: Harald Welte <laforge@openmoko.org>
* Balaji Rao <balajirrao@openmoko.org>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/mfd/pcf50633/core.h>
/* Two MBCS registers used during cold start */
#define PCF50633_REG_MBCS1 0x4b
#define PCF50633_REG_MBCS2 0x4c
#define PCF50633_MBCS1_USBPRES 0x01
#define PCF50633_MBCS1_ADAPTPRES 0x01
int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
void (*handler) (int, void *), void *data)
{
if (irq < 0 || irq >= PCF50633_NUM_IRQ || !handler)
return -EINVAL;
if (WARN_ON(pcf->irq_handler[irq].handler))
return -EBUSY;
mutex_lock(&pcf->lock);
pcf->irq_handler[irq].handler = handler;
pcf->irq_handler[irq].data = data;
mutex_unlock(&pcf->lock);
return 0;
}
EXPORT_SYMBOL_GPL(pcf50633_register_irq);
int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
{
if (irq < 0 || irq >= PCF50633_NUM_IRQ)
return -EINVAL;
mutex_lock(&pcf->lock);
pcf->irq_handler[irq].handler = NULL;
mutex_unlock(&pcf->lock);
return 0;
}
EXPORT_SYMBOL_GPL(pcf50633_free_irq);
static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
{
u8 reg, bit;
int ret = 0, idx;
idx = irq >> 3;
reg = PCF50633_REG_INT1M + idx;
bit = 1 << (irq & 0x07);
pcf50633_reg_set_bit_mask(pcf, reg, bit, mask ? bit : 0);
mutex_lock(&pcf->lock);
if (mask)
pcf->mask_regs[idx] |= bit;
else
pcf->mask_regs[idx] &= ~bit;
mutex_unlock(&pcf->lock);
return ret;
}
int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
{
dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
return __pcf50633_irq_mask_set(pcf, irq, 1);
}
EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
{
dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
return __pcf50633_irq_mask_set(pcf, irq, 0);
}
EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
{
u8 reg, bits;
reg = irq >> 3;
bits = 1 << (irq & 0x07);
return pcf->mask_regs[reg] & bits;
}
EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
{
if (pcf->irq_handler[irq].handler)
pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
}
/* Maximum amount of time ONKEY is held before emergency action is taken */
#define PCF50633_ONKEY1S_TIMEOUT 8
static irqreturn_t pcf50633_irq(int irq, void *data)
{
struct pcf50633 *pcf = data;
int ret, i, j;
u8 pcf_int[5], chgstat;
/* Read the 5 INT regs in one transaction */
ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
ARRAY_SIZE(pcf_int), pcf_int);
if (ret != ARRAY_SIZE(pcf_int)) {
dev_err(pcf->dev, "Error reading INT registers\n");
/*
* If this doesn't ACK the interrupt to the chip, we'll be
* called once again as we're level triggered.
*/
goto out;
}
/* defeat 8s death from lowsys on A5 */
pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04);
/* We immediately read the usb and adapter status. We thus make sure
* only of USBINS/USBREM IRQ handlers are called */
if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
if (chgstat & (0x3 << 4))
pcf_int[0] &= ~PCF50633_INT1_USBREM;
else
pcf_int[0] &= ~PCF50633_INT1_USBINS;
}
/* Make sure only one of ADPINS or ADPREM is set */
if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
if (chgstat & (0x3 << 4))
pcf_int[0] &= ~PCF50633_INT1_ADPREM;
else
pcf_int[0] &= ~PCF50633_INT1_ADPINS;
}
dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
"INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
/* Some revisions of the chip don't have a 8s standby mode on
* ONKEY1S press. We try to manually do it in such cases. */
if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
pcf->onkey1s_held);
if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
if (pcf->pdata->force_shutdown)
pcf->pdata->force_shutdown(pcf);
}
if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
dev_info(pcf->dev, "ONKEY1S held\n");
pcf->onkey1s_held = 1 ;
/* Unmask IRQ_SECOND */
pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
PCF50633_INT1_SECOND);
/* Unmask IRQ_ONKEYR */
pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
PCF50633_INT2_ONKEYR);
}
if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
pcf->onkey1s_held = 0;
/* Mask SECOND and ONKEYR interrupts */
if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
pcf50633_reg_set_bit_mask(pcf,
PCF50633_REG_INT1M,
PCF50633_INT1_SECOND,
PCF50633_INT1_SECOND);
if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
pcf50633_reg_set_bit_mask(pcf,
PCF50633_REG_INT2M,
PCF50633_INT2_ONKEYR,
PCF50633_INT2_ONKEYR);
}
/* Have we just resumed ? */
if (pcf->is_suspended) {
pcf->is_suspended = 0;
/* Set the resume reason filtering out non resumers */
for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
pcf->resume_reason[i] = pcf_int[i] &
pcf->pdata->resumers[i];
/* Make sure we don't pass on any ONKEY events to
* userspace now */
pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
}
for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
/* Unset masked interrupts */
pcf_int[i] &= ~pcf->mask_regs[i];
for (j = 0; j < 8 ; j++)
if (pcf_int[i] & (1 << j))
pcf50633_irq_call_handler(pcf, (i * 8) + j);
}
out:
return IRQ_HANDLED;
}
#ifdef CONFIG_PM
int pcf50633_irq_suspend(struct pcf50633 *pcf)
{
int ret;
int i;
u8 res[5];
/* Make sure our interrupt handlers are not called
* henceforth */
disable_irq(pcf->irq);
/* Save the masks */
ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
ARRAY_SIZE(pcf->suspend_irq_masks),
pcf->suspend_irq_masks);
if (ret < 0) {
dev_err(pcf->dev, "error saving irq masks\n");
goto out;
}
/* Write wakeup irq masks */
for (i = 0; i < ARRAY_SIZE(res); i++)
res[i] = ~pcf->pdata->resumers[i];
ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
ARRAY_SIZE(res), &res[0]);
if (ret < 0) {
dev_err(pcf->dev, "error writing wakeup irq masks\n");
goto out;
}
pcf->is_suspended = 1;
out:
return ret;
}
int pcf50633_irq_resume(struct pcf50633 *pcf)
{
int ret;
/* Write the saved mask registers */
ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
ARRAY_SIZE(pcf->suspend_irq_masks),
pcf->suspend_irq_masks);
if (ret < 0)
dev_err(pcf->dev, "Error restoring saved suspend masks\n");
enable_irq(pcf->irq);
return ret;
}
#endif
int pcf50633_irq_init(struct pcf50633 *pcf, int irq)
{
int ret;
pcf->irq = irq;
/* Enable all interrupts except RTC SECOND */
pcf->mask_regs[0] = 0x80;
pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
ret = request_threaded_irq(irq, NULL, pcf50633_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"pcf50633", pcf);
if (ret)
dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
if (enable_irq_wake(irq) < 0)
dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
"in this hardware revision", irq);
return ret;
}
void pcf50633_irq_free(struct pcf50633 *pcf)
{
free_irq(pcf->irq, pcf);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册