MIPS: Disable MIPS16/microMIPS crap for platforms not supporting these ASEs.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -83,6 +83,7 @@ config AR7
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select ARCH_REQUIRE_GPIOLIB
 	select VLYNQ
@@ -106,6 +107,7 @@ config ATH79
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	help
 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
 
@@ -122,6 +124,7 @@ config BCM47XX
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
 	help
@@ -248,6 +251,7 @@ config LANTIQ
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_HAS_EARLY_PRINTK
 	select ARCH_REQUIRE_GPIOLIB
@@ -330,6 +334,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_ZBOOT
@@ -361,6 +366,7 @@ config MIPS_SEAD3
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_MICROMIPS
+	select SYS_SUPPORTS_MIPS16
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
@@ -380,6 +386,7 @@ config MACH_VR41XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_MIPS16
 	select ARCH_REQUIRE_GPIOLIB
 
 config NXP_STB220
@@ -407,6 +414,7 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -430,6 +438,7 @@ config RALINK
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
@@ -1059,6 +1068,7 @@ config SOC_PNX833X
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MIPS16
 	select CPU_MIPSR2_IRQ_VI
 
 config SOC_PNX8335
@@ -2199,6 +2209,13 @@ config SYS_SUPPORTS_SMARTMIPS
 config SYS_SUPPORTS_MICROMIPS
 	bool
 
+config SYS_SUPPORTS_MIPS16
+	bool
+	help
+	  This option must be set if a kernel might be executed on a MIPS16-
+	  enabled CPU even if MIPS16 is not actually being used.  In other
+	  words, it makes the kernel MIPS16-tolerant.
+
 config CPU_SUPPORTS_MSA
 	bool
 

arch/mips/include/asm/mipsregs.h

@@ -709,11 +709,18 @@
 #ifndef __ASSEMBLY__
 
 /*
- * Macros for handling the ISA mode bit for microMIPS.
+ * Macros for handling the ISA mode bit for MIPS16 and microMIPS.
  */
+#if defined(CONFIG_SYS_SUPPORTS_MIPS16) || \
+    defined(CONFIG_SYS_SUPPORTS_MICROMIPS)
 #define get_isa16_mode(x)		((x) & 0x1)
 #define msk_isa16_mode(x)		((x) & ~0x1)
 #define set_isa16_mode(x)		do { (x) |= 0x1; } while(0)
+#else
+#define get_isa16_mode(x)		0
+#define msk_isa16_mode(x)		(x)
+#define set_isa16_mode(x)		do { } while(0)
+#endif
 
 /*
  * microMIPS instructions can be 16-bit or 32-bit in length. This

arch/mips/loongson1/Kconfig

@@ -14,6 +14,7 @@ config LOONGSON1_LS1B
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_MIPS16
 	select SYS_HAS_EARLY_PRINTK
 	select COMMON_CLK