net: hns3: Fix for waterline not setting correctly

The HCLGE_RX_PRIV_EN_B is used to tell the firmware whether
to update the specific waterline value, if the is not set,
the firmware will ignore the value.

This patch fixes by setting the HCLGE_RX_PRIV_EN_B even if
the updated value is zero.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -1834,8 +1834,6 @@ static int hclge_rx_priv_buf_alloc(struct hclge_dev *hdev,
 	return 0;
 }
 
-#define HCLGE_PRIV_ENABLE(a) ((a) > 0 ? 1 : 0)
-
 static int hclge_rx_priv_wl_config(struct hclge_dev *hdev,
 				   struct hclge_pkt_buf_alloc *buf_alloc)
 {
@@ -1863,13 +1861,11 @@ static int hclge_rx_priv_wl_config(struct hclge_dev *hdev,
 			req->tc_wl[j].high =
 				cpu_to_le16(priv->wl.high >> HCLGE_BUF_UNIT_S);
 			req->tc_wl[j].high |=
-				cpu_to_le16(HCLGE_PRIV_ENABLE(priv->wl.high) <<
-					    HCLGE_RX_PRIV_EN_B);
+				cpu_to_le16(BIT(HCLGE_RX_PRIV_EN_B));
 			req->tc_wl[j].low =
 				cpu_to_le16(priv->wl.low >> HCLGE_BUF_UNIT_S);
 			req->tc_wl[j].low |=
-				cpu_to_le16(HCLGE_PRIV_ENABLE(priv->wl.low) <<
-					    HCLGE_RX_PRIV_EN_B);
+				 cpu_to_le16(BIT(HCLGE_RX_PRIV_EN_B));
 		}
 	}
 
@@ -1911,13 +1907,11 @@ static int hclge_common_thrd_config(struct hclge_dev *hdev,
 			req->com_thrd[j].high =
 				cpu_to_le16(tc->high >> HCLGE_BUF_UNIT_S);
 			req->com_thrd[j].high |=
-				cpu_to_le16(HCLGE_PRIV_ENABLE(tc->high) <<
-					    HCLGE_RX_PRIV_EN_B);
+				 cpu_to_le16(BIT(HCLGE_RX_PRIV_EN_B));
 			req->com_thrd[j].low =
 				cpu_to_le16(tc->low >> HCLGE_BUF_UNIT_S);
 			req->com_thrd[j].low |=
-				cpu_to_le16(HCLGE_PRIV_ENABLE(tc->low) <<
-					    HCLGE_RX_PRIV_EN_B);
+				 cpu_to_le16(BIT(HCLGE_RX_PRIV_EN_B));
 		}
 	}
 
@@ -1943,14 +1937,10 @@ static int hclge_common_wl_config(struct hclge_dev *hdev,
 
 	req = (struct hclge_rx_com_wl *)desc.data;
 	req->com_wl.high = cpu_to_le16(buf->self.high >> HCLGE_BUF_UNIT_S);
-	req->com_wl.high |=
-		cpu_to_le16(HCLGE_PRIV_ENABLE(buf->self.high) <<
-			    HCLGE_RX_PRIV_EN_B);
+	req->com_wl.high |=  cpu_to_le16(BIT(HCLGE_RX_PRIV_EN_B));
 
 	req->com_wl.low = cpu_to_le16(buf->self.low >> HCLGE_BUF_UNIT_S);
-	req->com_wl.low |=
-		cpu_to_le16(HCLGE_PRIV_ENABLE(buf->self.low) <<
-			    HCLGE_RX_PRIV_EN_B);
+	req->com_wl.low |=  cpu_to_le16(BIT(HCLGE_RX_PRIV_EN_B));
 
 	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
 	if (ret) {