提交 36ac914b 编写于 作者: X Xiaofan Tian 提交者: Mark Brown

regmap: irq: Add mask invert flag for enable register

Currently, regmap will write 1 to mask_base to mask
an interrupt and write 0 to unmask it.

But some chips do not have an interrupt mask register,
and only have interrupt enable register.
Then we should write 0 to disable interrupt and 1 to enable.

So add an mask_invert flag to handle this.
If it is not set, behavior is same as previous.
If set it to 1, the mask value will be inverted
before written to mask_base
Signed-off-by: NXiaofan Tian <tianxf@marvell.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 7a976379
......@@ -78,7 +78,11 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
for (i = 0; i < d->chip->num_regs; i++) {
reg = d->chip->mask_base +
(i * map->reg_stride * d->irq_reg_stride);
ret = regmap_update_bits(d->map, reg,
if (d->chip->mask_invert)
ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i], ~d->mask_buf[i]);
else
ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i], d->mask_buf[i]);
if (ret != 0)
dev_err(d->map->dev, "Failed to sync masks in %x\n",
......@@ -338,7 +342,11 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
d->mask_buf[i] = d->mask_buf_def[i];
reg = chip->mask_base +
(i * map->reg_stride * d->irq_reg_stride);
ret = regmap_update_bits(map, reg,
if (chip->mask_invert)
ret = regmap_update_bits(map, reg,
d->mask_buf[i], ~d->mask_buf[i]);
else
ret = regmap_update_bits(map, reg,
d->mask_buf[i], d->mask_buf[i]);
if (ret != 0) {
dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
......
......@@ -300,6 +300,7 @@ struct regmap_irq_chip {
unsigned int ack_base;
unsigned int wake_base;
unsigned int irq_reg_stride;
unsigned int mask_invert;
bool runtime_pm;
int num_regs;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册