提交 36954dc7 编写于 作者: G Gavin Shan 提交者: Benjamin Herrenschmidt

powerpc/powernv: Reserve the correct PE number

We're assigning PE numbers after the completion of PCI probe. During
the PCI probe, we had PE#0 as the super container to encompass all
PCI devices. However, that's inappropriate since PELTM has ascending
order of priority on search on P7IOC. So we need PE#127 takes the
role that PE#0 has previously. For PHB3, we still have PE#0 as the
reserved PE.

The patch supposes that the underly firmware has built the RID to
PE# mapping after resetting IODA tables: all PELTM entries except
last one has invalid mapping on P7IOC, but all RTEs have binding
to PE#0. The reserved PE# is being exported by firmware by device
tree.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
上级 631ad691
......@@ -1209,12 +1209,13 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
pr_err(" Failed to map registers !\n");
/* Initialize more IODA stuff */
phb->ioda.total_pe = 1;
prop32 = of_get_property(np, "ibm,opal-num-pes", NULL);
if (!prop32)
phb->ioda.total_pe = 1;
else
if (prop32)
phb->ioda.total_pe = be32_to_cpup(prop32);
prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL);
if (prop32)
phb->ioda.reserved_pe = be32_to_cpup(prop32);
phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
/* FW Has already off top 64k of M32 space (MSI space) */
phb->ioda.m32_size += 0x10000;
......@@ -1243,7 +1244,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
if (phb->type == PNV_PHB_IODA1)
phb->ioda.io_segmap = aux + iomap_off;
phb->ioda.pe_array = aux + pemap_off;
set_bit(0, phb->ioda.pe_alloc);
set_bit(phb->ioda.reserved_pe, phb->ioda.pe_alloc);
INIT_LIST_HEAD(&phb->ioda.pe_dma_list);
INIT_LIST_HEAD(&phb->ioda.pe_list);
......@@ -1268,8 +1269,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
segment_size);
#endif
pr_info(" %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n",
pr_info(" %d (%d) PE's M32: 0x%x [segment=0x%x]"
" IO: 0x%x [segment=0x%x]\n",
phb->ioda.total_pe,
phb->ioda.reserved_pe,
phb->ioda.m32_size, phb->ioda.m32_segsize,
phb->ioda.io_size, phb->ioda.io_segsize);
......@@ -1306,13 +1309,6 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
if (rc)
pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
/*
* On IODA1 map everything to PE#0, on IODA2 we assume the IODA reset
* has cleared the RTT which has the same effect
*/
if (ioda_type == PNV_PHB_IODA1)
opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
}
void __init pnv_pci_init_ioda2_phb(struct device_node *np)
......
......@@ -242,11 +242,15 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
/*
* Get the PE#. During the PCI probe stage, we might not
* setup that yet. So all ER errors should be mapped to
* PE#0
* reserved PE.
*/
pe_no = PCI_DN(dn)->pe_number;
if (pe_no == IODA_INVALID_PE)
pe_no = 0;
if (pe_no == IODA_INVALID_PE) {
if (phb->type == PNV_PHB_P5IOC2)
pe_no = 0;
else
pe_no = phb->ioda.reserved_pe;
}
/* Read freeze status */
rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
......
......@@ -125,6 +125,7 @@ struct pnv_phb {
struct {
/* Global bridge info */
unsigned int total_pe;
unsigned int reserved_pe;
unsigned int m32_size;
unsigned int m32_segsize;
unsigned int m32_pci_base;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册