提交 368609c5 编写于 作者: J Jean Delvare 提交者: Linus Torvalds

[PATCH] I2C: Missing space in split strings

A few split string in i2c (and now hwmon) drivers lack a joining space,
causing them to display incorrectly. This trivial patch fixes that up.
Please apply, thanks.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 d91e1694
......@@ -393,7 +393,7 @@ void adm1026_init_client(struct i2c_client *client)
value = data->config3;
if (data->config3 & CFG3_GPIO16_ENABLE) {
dev_dbg(&client->dev, "GPIO16 enabled. THERM"
dev_dbg(&client->dev, "GPIO16 enabled. THERM "
"pin disabled.\n");
} else {
dev_dbg(&client->dev, "THERM pin enabled. "
......
......@@ -363,7 +363,7 @@ static void __exit sensors_max1619_exit(void)
i2c_del_driver(&max1619_driver);
}
MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
"Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("MAX1619 sensor driver");
MODULE_LICENSE("GPL");
......
......@@ -1043,7 +1043,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
if (init >= 2 && data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE);
dev_info(&client->dev, "VLM conversion set to"
dev_info(&client->dev, "VLM conversion set to "
"1s period, 160us delay\n");
pc87360_write_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE,
......
......@@ -137,7 +137,7 @@ static int i801_setup(struct pci_dev *dev)
pci_read_config_word(I801_dev, SMBBA, &i801_smba);
i801_smba &= 0xfff0;
if(i801_smba == 0) {
dev_err(&dev->dev, "SMB base address uninitialized"
dev_err(&dev->dev, "SMB base address uninitialized "
"- upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
......@@ -186,7 +186,7 @@ static int i801_transaction(void)
int result = 0;
int timeout = 0;
dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
......@@ -240,7 +240,7 @@ static int i801_transaction(void)
outb_p(inb(SMBHSTSTS), SMBHSTSTS);
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
"(%02x)\n", temp);
}
dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册