mmc: dw_mmc-k3: add sd support for hi3660

Add sd card support for hi3660 soc
Signed-off-by: NLi Wei <liwei213@huawei.com>
Signed-off-by: NChen Jun <chenjun14@huawei.com>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/dw_mmc-k3.c

@@ -8,6 +8,8 @@
  * (at your option) any later version.
  */
 
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mmc/host.h>
@@ -28,7 +30,35 @@
 #define AO_SCTRL_SEL18		BIT(10)
 #define AO_SCTRL_CTRL3		0x40C
 
+#define DWMMC_SDIO_ID 2
+
+#define SOC_SCTRL_SCPERCTRL5    (0x314)
+#define SDCARD_IO_SEL18         BIT(2)
+
+#define SDCARD_RD_THRESHOLD  (512)
+
+#define GENCLK_DIV (7)
+
+#define GPIO_CLK_ENABLE                   BIT(16)
+#define GPIO_CLK_DIV_MASK                 GENMASK(11, 8)
+#define GPIO_USE_SAMPLE_DLY_MASK          GENMASK(13, 13)
+#define UHS_REG_EXT_SAMPLE_PHASE_MASK     GENMASK(20, 16)
+#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK  GENMASK(25, 21)
+#define UHS_REG_EXT_SAMPLE_DLY_MASK       GENMASK(30, 26)
+
+#define TIMING_MODE     3
+#define TIMING_CFG_NUM 10
+
+#define NUM_PHASES (40)
+
+#define ENABLE_SHIFT_MIN_SMPL (4)
+#define ENABLE_SHIFT_MAX_SMPL (12)
+#define USE_DLY_MIN_SMPL (11)
+#define USE_DLY_MAX_SMPL (14)
+
 struct k3_priv {
+	int ctrl_id;
+	u32 cur_speed;
 	struct regmap	*reg;
 };
 
@@ -38,6 +68,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
 	0
 };
 
+struct hs_timing {
+	u32 drv_phase;
+	u32 smpl_dly;
+	u32 smpl_phase_max;
+	u32 smpl_phase_min;
+};
+
+struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
+	{ /* reserved */ },
+	{ /* SD */
+		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
+		{6, 0,  4,  4,},  /* 1: MMC_HS */
+		{6, 0,  3,  3,},  /* 2: SD_HS */
+		{6, 0, 15, 15,},  /* 3: SDR12 */
+		{6, 0,  2,  2,},  /* 4: SDR25 */
+		{4, 0, 11,  0,},  /* 5: SDR50 */
+		{6, 4, 15,  0,},  /* 6: SDR104 */
+		{0},              /* 7: DDR50 */
+		{0},              /* 8: DDR52 */
+		{0},              /* 9: HS200 */
+	},
+	{ /* SDIO */
+		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
+		{0},              /* 1: MMC_HS */
+		{6, 0, 15, 15,},  /* 2: SD_HS */
+		{6, 0, 15, 15,},  /* 3: SDR12 */
+		{6, 0,  0,  0,},  /* 4: SDR25 */
+		{4, 0, 12,  0,},  /* 5: SDR50 */
+		{5, 4, 15,  0,},  /* 6: SDR104 */
+		{0},              /* 7: DDR50 */
+		{0},              /* 8: DDR52 */
+		{0},              /* 9: HS200 */
+	}
+};
+
 static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 {
 	int ret;
@@ -66,6 +131,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
 	if (IS_ERR(priv->reg))
 		priv->reg = NULL;
 
+	priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
+	if (priv->ctrl_id < 0)
+		priv->ctrl_id = 0;
+
 	host->priv = priv;
 	return 0;
 }
@@ -144,7 +213,236 @@ static const struct dw_mci_drv_data hi6220_data = {
 	.execute_tuning		= dw_mci_hi6220_execute_tuning,
 };
 
+static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
+				     int smpl_phase)
+{
+	u32 drv_phase;
+	u32 smpl_dly;
+	u32 use_smpl_dly = 0;
+	u32 enable_shift = 0;
+	u32 reg_value;
+	int ctrl_id;
+	struct k3_priv *priv;
+
+	priv = host->priv;
+	ctrl_id = priv->ctrl_id;
+
+	drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
+	smpl_dly   = hs_timing_cfg[ctrl_id][timing].smpl_dly;
+	if (smpl_phase == -1)
+		smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
+			     hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
+
+	switch (timing) {
+	case MMC_TIMING_UHS_SDR104:
+		if (smpl_phase >= USE_DLY_MIN_SMPL &&
+				smpl_phase <= USE_DLY_MAX_SMPL)
+			use_smpl_dly = 1;
+			/* fallthrough */
+	case MMC_TIMING_UHS_SDR50:
+		if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
+				smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
+			enable_shift = 1;
+		break;
+	}
+
+	mci_writel(host, GPIO, 0x0);
+	usleep_range(5, 10);
+
+	reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
+		    FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
+		    FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
+	mci_writel(host, UHS_REG_EXT, reg_value);
+
+	mci_writel(host, ENABLE_SHIFT, enable_shift);
+
+	reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
+			     FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
+	mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
+
+	/* We should delay 1ms wait for timing setting finished. */
+	usleep_range(1000, 2000);
+}
+
+static int dw_mci_hi3660_init(struct dw_mci *host)
+{
+	mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
+		    SDMMC_CARD_RD_THR_EN));
+
+	dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
+	host->bus_hz /= (GENCLK_DIV + 1);
+
+	return 0;
+}
+
+static int dw_mci_set_sel18(struct dw_mci *host, bool set)
+{
+	int ret;
+	unsigned int val;
+	struct k3_priv *priv;
+
+	priv = host->priv;
+
+	val = set ? SDCARD_IO_SEL18 : 0;
+	ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
+				 SDCARD_IO_SEL18, val);
+	if (ret) {
+		dev_err(host->dev, "sel18 %u error\n", val);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+	unsigned long wanted;
+	unsigned long actual;
+	struct k3_priv *priv = host->priv;
+
+	if (!ios->clock || ios->clock == priv->cur_speed)
+		return;
+
+	wanted = ios->clock * (GENCLK_DIV + 1);
+	ret = clk_set_rate(host->ciu_clk, wanted);
+	if (ret) {
+		dev_err(host->dev, "failed to set rate %luHz\n", wanted);
+		return;
+	}
+	actual = clk_get_rate(host->ciu_clk);
+
+	dw_mci_hs_set_timing(host, ios->timing, -1);
+	host->bus_hz = actual / (GENCLK_DIV + 1);
+	host->current_speed = 0;
+	priv->cur_speed = host->bus_hz;
+}
+
+static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
+{
+	int i;
+	int interval;
+	unsigned int v;
+	unsigned int len;
+	unsigned int range_start = 0;
+	unsigned int range_length = 0;
+	unsigned int middle_range = 0;
+
+	if (!sample_flag)
+		return -EIO;
+
+	if (~sample_flag == 0)
+		return 0;
+
+	i = ffs(sample_flag) - 1;
+
+	/*
+	* A clock cycle is divided into 32 phases,
+	* each of which is represented by a bit,
+	* finding the optimal phase.
+	*/
+	while (i < 32) {
+		v = ror32(sample_flag, i);
+		len = ffs(~v) - 1;
+
+		if (len > range_length) {
+			range_length = len;
+			range_start = i;
+		}
+
+		interval = ffs(v >> len) - 1;
+		if (interval < 0)
+			break;
+
+		i += len + interval;
+	}
+
+	middle_range = range_start + range_length / 2;
+	if (middle_range >= 32)
+		middle_range %= 32;
+
+	return middle_range;
+}
+
+static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
+{
+	int i = 0;
+	struct dw_mci *host = slot->host;
+	struct mmc_host *mmc = slot->mmc;
+	int smpl_phase = 0;
+	u32 tuning_sample_flag = 0;
+	int best_clksmpl = 0;
+
+	for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
+		smpl_phase %= 32;
+
+		mci_writel(host, TMOUT, ~0);
+		dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase);
+
+		if (!mmc_send_tuning(mmc, opcode, NULL))
+			tuning_sample_flag |= (1 << smpl_phase);
+		else
+			tuning_sample_flag &= ~(1 << smpl_phase);
+	}
+
+	best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
+	if (best_clksmpl < 0) {
+		dev_err(host->dev, "All phases bad!\n");
+		return -EIO;
+	}
+
+	dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
+
+	dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
+		 best_clksmpl, tuning_sample_flag);
+	return 0;
+}
+
+static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
+					struct mmc_ios *ios)
+{
+	int ret = 0;
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct k3_priv *priv;
+	struct dw_mci *host;
+
+	host = slot->host;
+	priv = host->priv;
+
+	if (!priv || !priv->reg)
+		return 0;
+
+	if (priv->ctrl_id == DWMMC_SDIO_ID)
+		return 0;
+
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+		ret = dw_mci_set_sel18(host, 0);
+	else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+		ret = dw_mci_set_sel18(host, 1);
+	if (ret)
+		return ret;
+
+	if (!IS_ERR(mmc->supply.vqmmc)) {
+		ret = mmc_regulator_set_vqmmc(mmc, ios);
+		if (ret) {
+			dev_err(host->dev, "Regulator set error %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct dw_mci_drv_data hi3660_data = {
+	.init = dw_mci_hi3660_init,
+	.set_ios = dw_mci_hi3660_set_ios,
+	.parse_dt = dw_mci_hi6220_parse_dt,
+	.execute_tuning = dw_mci_hi3660_execute_tuning,
+	.switch_voltage  = dw_mci_hi3660_switch_voltage,
+};
+
 static const struct of_device_id dw_mci_k3_match[] = {
+	{ .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
 	{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
 	{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
 	{},

drivers/mmc/host/dw_mmc.h

@@ -314,6 +314,8 @@ struct dw_mci_board {
 #define SDMMC_DSCADDR		0x094
 #define SDMMC_BUFADDR		0x098
 #define SDMMC_CDTHRCTL		0x100
+#define SDMMC_UHS_REG_EXT	0x108
+#define SDMMC_ENABLE_SHIFT	0x110
 #define SDMMC_DATA(x)		(x)
 /*
 * Registers to support idmac 64-bit address mode