Merge tag 'highbank-for-3.12' of git://sources.calxeda.com/kernel/linux into late/all

From Rob Herring:
Updates for Highbank for 3.12:
- A couple of fixes to enable LPAE.
- pl08x driver fixes to make it build with ARCH_DMA_ADDR_T_64BIT.
- Avoid L2 related smc calls on Midway.
- Add selecting of necesssary ARM errata.

* tag 'highbank-for-3.12' of git://sources.calxeda.com/kernel/linux:
  ARM: highbank: clean-up some unused includes
  ARM: highbank: avoid L2 cache smc calls when PL310 is not present
  ARM: move outer_cache declaration out of ifdef
  ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
  DMA: fix printk warning in AMBA PL08x DMA driver
  DMA: fix AMBA PL08x compilation issue with 64bit DMA address type
  ARM: highbank: select required errata work-arounds
  ARM: highbank: select ARCH_HAS_HOLES_MEMORYMODEL
  ARM: highbank: enable DMA zone for LPAE
  ARM: use phys_addr_t for DMA zone sizes
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/include/asm/mach/arch.h

@@ -35,7 +35,7 @@ struct machine_desc {
 	unsigned int		nr_irqs;	/* number of IRQs */
 
 #ifdef CONFIG_ZONE_DMA
-	unsigned long		dma_zone_size;	/* size of DMA-able area */
+	phys_addr_t		dma_zone_size;	/* size of DMA-able area */
 #endif
 
 	unsigned int		video_start;	/* start of video RAM	*/

arch/arm/include/asm/outercache.h

@@ -37,10 +37,10 @@ struct outer_cache_fns {
 	void (*resume)(void);
 };
 
-#ifdef CONFIG_OUTER_CACHE
-
 extern struct outer_cache_fns outer_cache;
 
+#ifdef CONFIG_OUTER_CACHE
+
 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.inv_range)

arch/arm/mach-highbank/Kconfig

 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_ERRATA_764369
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_798181
 	select ARM_GIC
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
@@ -18,3 +23,4 @@ config ARCH_HIGHBANK
 	select PL320_MBOX
 	select SPARSE_IRQ
 	select USE_OF
+	select ZONE_DMA if ARM_LPAE

arch/arm/mach-highbank/highbank.c

@@ -18,14 +18,11 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
-#include <linux/smp.h>
 #include <linux/amba/bus.h>
 #include <linux/clk-provider.h>
 
@@ -35,7 +32,6 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "core.h"
 #include "sysregs.h"
@@ -65,13 +61,11 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
 			  HB_JUMP_TABLE_PHYS(cpu) + 15);
 }
 
-#ifdef CONFIG_CACHE_L2X0
 static void highbank_l2x0_disable(void)
 {
 	/* Disable PL310 L2 Cache controller */
 	highbank_smc1(0x102, 0x0);
 }
-#endif
 
 static void __init highbank_init_irq(void)
 {
@@ -80,12 +74,13 @@ static void __init highbank_init_irq(void)
 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
 		highbank_scu_map_io();
 
-#ifdef CONFIG_CACHE_L2X0
 	/* Enable PL310 L2 Cache controller */
-	highbank_smc1(0x102, 0x1);
-	l2x0_of_init(0, ~0UL);
-	outer_cache.disable = highbank_l2x0_disable;
-#endif
+	if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
+	    of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
+		highbank_smc1(0x102, 0x1);
+		l2x0_of_init(0, ~0UL);
+		outer_cache.disable = highbank_l2x0_disable;
+	}
 }
 
 static void __init highbank_timer_init(void)
@@ -176,6 +171,9 @@ static const char *highbank_match[] __initconst = {
 };
 
 DT_MACHINE_START(HIGHBANK, "Highbank")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= (4ULL * SZ_1G),
+#endif
 	.smp		= smp_ops(highbank_smp_ops),
 	.init_irq	= highbank_init_irq,
 	.init_time	= highbank_timer_init,

arch/arm/mm/init.c

@@ -207,7 +207,7 @@ static void __init arm_bootmem_init(unsigned long start_pfn,
 
 #ifdef CONFIG_ZONE_DMA
 
-unsigned long arm_dma_zone_size __read_mostly;
+phys_addr_t arm_dma_zone_size __read_mostly;
 EXPORT_SYMBOL(arm_dma_zone_size);
 
 /*

drivers/dma/amba-pl08x.c

@@ -133,6 +133,8 @@ struct pl08x_bus_data {
 	u8 buswidth;
 };
 
+#define IS_BUS_ALIGNED(bus) IS_ALIGNED((bus)->addr, (bus)->buswidth)
+
 /**
  * struct pl08x_phy_chan - holder for the physical channels
  * @id: physical index to this channel
@@ -845,10 +847,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 
 		pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
 
-		dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
-			bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
+		dev_vdbg(&pl08x->adev->dev,
+			"src=0x%08llx%s/%u dst=0x%08llx%s/%u len=%zu\n",
+			(u64)bd.srcbus.addr,
+			cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
 			bd.srcbus.buswidth,
-			bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
+			(u64)bd.dstbus.addr,
+			cctl & PL080_CONTROL_DST_INCR ? "+" : "",
 			bd.dstbus.buswidth,
 			bd.remainder);
 		dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
@@ -886,8 +891,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 				return 0;
 			}
 
-			if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
-					(bd.dstbus.addr % bd.dstbus.buswidth)) {
+			if (!IS_BUS_ALIGNED(&bd.srcbus) ||
+				!IS_BUS_ALIGNED(&bd.dstbus)) {
 				dev_err(&pl08x->adev->dev,
 					"%s src & dst address must be aligned to src"
 					" & dst width if peripheral is flow controller",
@@ -908,9 +913,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 		 */
 		if (bd.remainder < mbus->buswidth)
 			early_bytes = bd.remainder;
-		else if ((mbus->addr) % (mbus->buswidth)) {
-			early_bytes = mbus->buswidth - (mbus->addr) %
-				(mbus->buswidth);
+		else if (!IS_BUS_ALIGNED(mbus)) {
+			early_bytes = mbus->buswidth -
+				(mbus->addr & (mbus->buswidth - 1));
 			if ((bd.remainder - early_bytes) < mbus->buswidth)
 				early_bytes = bd.remainder;
 		}
@@ -928,7 +933,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 			 * Master now aligned
 			 * - if slave is not then we must set its width down
 			 */
-			if (sbus->addr % sbus->buswidth) {
+			if (!IS_BUS_ALIGNED(sbus)) {
 				dev_dbg(&pl08x->adev->dev,
 					"%s set down bus width to one byte\n",
 					__func__);