提交 35f2d7d0 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Create tg3_poll_msix() for non-zero MSIX vecs

This patch gives all non-zero MSIX vectors their own NAPI handler.  This
will make NAPI handling for those vectors slightly more efficient.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 cbf9ca6c
......@@ -4706,18 +4706,17 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
return received;
}
static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
static void tg3_poll_link(struct tg3 *tp)
{
struct tg3 *tp = tnapi->tp;
struct tg3_hw_status *sblk = tnapi->hw_status;
/* handle link change and other phy events */
if (!(tp->tg3_flags &
(TG3_FLAG_USE_LINKCHG_REG |
TG3_FLAG_POLL_SERDES))) {
struct tg3_hw_status *sblk = tp->napi[0].hw_status;
if (sblk->status & SD_STATUS_LINK_CHG) {
sblk->status = SD_STATUS_UPDATED |
(sblk->status & ~SD_STATUS_LINK_CHG);
(sblk->status & ~SD_STATUS_LINK_CHG);
spin_lock(&tp->lock);
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
tw32_f(MAC_STATUS,
......@@ -4731,6 +4730,11 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
spin_unlock(&tp->lock);
}
}
}
static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
{
struct tg3 *tp = tnapi->tp;
/* run TX completion thread */
if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
......@@ -4749,6 +4753,50 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
return work_done;
}
static int tg3_poll_msix(struct napi_struct *napi, int budget)
{
struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
struct tg3 *tp = tnapi->tp;
int work_done = 0;
struct tg3_hw_status *sblk = tnapi->hw_status;
while (1) {
work_done = tg3_poll_work(tnapi, work_done, budget);
if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
goto tx_recovery;
if (unlikely(work_done >= budget))
break;
/* tp->last_tag is used in tg3_restart_ints() below
* to tell the hw how much work has been processed,
* so we must read it before checking for more work.
*/
tnapi->last_tag = sblk->status_tag;
tnapi->last_irq_tag = tnapi->last_tag;
rmb();
/* check for RX/TX work to do */
if (sblk->idx[0].tx_consumer == tnapi->tx_cons &&
*(tnapi->rx_rcb_prod_idx) == tnapi->rx_rcb_ptr) {
napi_complete(napi);
/* Reenable interrupts. */
tw32_mailbox(tnapi->int_mbox, tnapi->last_tag << 24);
mmiowb();
break;
}
}
return work_done;
tx_recovery:
/* work_done is guaranteed to be less than budget. */
napi_complete(napi);
schedule_work(&tp->reset_task);
return work_done;
}
static int tg3_poll(struct napi_struct *napi, int budget)
{
struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
......@@ -4757,6 +4805,8 @@ static int tg3_poll(struct napi_struct *napi, int budget)
struct tg3_hw_status *sblk = tnapi->hw_status;
while (1) {
tg3_poll_link(tp);
work_done = tg3_poll_work(tnapi, work_done, budget);
if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
......@@ -14057,10 +14107,13 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tnapi->consmbox = rcvmbx;
tnapi->prodmbox = sndmbx;
if (i)
if (i) {
tnapi->coal_now = HOSTCC_MODE_COAL_VEC1_NOW << (i - 1);
else
netif_napi_add(dev, &tnapi->napi, tg3_poll_msix, 64);
} else {
tnapi->coal_now = HOSTCC_MODE_NOW;
netif_napi_add(dev, &tnapi->napi, tg3_poll, 64);
}
if (!(tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX))
break;
......@@ -14083,7 +14136,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
sndmbx += 0xc;
}
netif_napi_add(dev, &tp->napi[0].napi, tg3_poll, 64);
dev->ethtool_ops = &tg3_ethtool_ops;
dev->watchdog_timeo = TG3_TX_TIMEOUT;
dev->irq = pdev->irq;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册