Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: Voluntary leave_mm before entering deeper
  acpi_idle: add missing \n to printk
  intel_idle: add missing __percpu markup
  intel_idle: Change mode 755 => 644
  cpuidle: Fix typos
  intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang

drivers/acpi/processor_driver.c

@@ -850,7 +850,7 @@ static int __init acpi_processor_init(void)
 		printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
 			acpi_idle_driver.name);
 	} else {
-		printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s",
+		printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n",
 			cpuidle_get_driver()->name);
 	}
 

drivers/cpuidle/governors/menu.c

@@ -80,7 +80,7 @@
  * Limiting Performance Impact
  * ---------------------------
  * C states, especially those with large exit latencies, can have a real
- * noticable impact on workloads, which is not acceptable for most sysadmins,
+ * noticeable impact on workloads, which is not acceptable for most sysadmins,
  * and in addition, less performance has a power price of its own.
  *
  * As a general rule of thumb, menu assumes that the following heuristic

drivers/idle/intel_idle.c

@@ -83,7 +83,7 @@ static unsigned int mwait_substates;
 /* Reliable LAPIC Timer States, bit 1 for C1 etc.  */
 static unsigned int lapic_timer_reliable_states;
 
-static struct cpuidle_device *intel_idle_cpuidle_devices;
+static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
 static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state);
 
 static struct cpuidle_state *cpuidle_state_table;
@@ -108,7 +108,7 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "NHM-C3",
 		.desc = "MWAIT 0x10",
 		.driver_data = (void *) 0x10,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 20,
 		.power_usage = 500,
 		.target_residency = 80,
@@ -117,7 +117,7 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "NHM-C6",
 		.desc = "MWAIT 0x20",
 		.driver_data = (void *) 0x20,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 200,
 		.power_usage = 350,
 		.target_residency = 800,
@@ -149,7 +149,7 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "ATM-C4",
 		.desc = "MWAIT 0x30",
 		.driver_data = (void *) 0x30,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 100,
 		.power_usage = 250,
 		.target_residency = 400,
@@ -159,7 +159,7 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "ATM-C6",
 		.desc = "MWAIT 0x40",
 		.driver_data = (void *) 0x40,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 200,
 		.power_usage = 150,
 		.target_residency = 800,
@@ -185,6 +185,16 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
 
 	local_irq_disable();
 
+	/*
+	 * If the state flag indicates that the TLB will be flushed or if this
+	 * is the deepest c-state supported, do a voluntary leave mm to avoid
+	 * costly and mostly unnecessary wakeups for flushing the user TLB's
+	 * associated with the active mm.
+	 */
+	if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED ||
+	    (&dev->states[dev->state_count - 1] == state))
+		leave_mm(cpu);
+
 	if (!(lapic_timer_reliable_states & (1 << (cstate))))
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 

drivers/pci/quirks.c

@@ -162,6 +162,26 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_1,	quirk_isa_d
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_2,	quirk_isa_dma_hangs);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_3,	quirk_isa_dma_hangs);
 
+/*
+ * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
+ * for some HT machines to use C4 w/o hanging.
+ */
+static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev)
+{
+	u32 pmbase;
+	u16 pm1a;
+
+	pci_read_config_dword(dev, 0x40, &pmbase);
+	pmbase = pmbase & 0xff80;
+	pm1a = inw(pmbase);
+
+	if (pm1a & 0x10) {
+		dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
+		outw(0x10, pmbase);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+
 /*
  *	Chipsets where PCI->PCI transfers vanish or hang
  */

include/linux/cpuidle.h

@@ -53,6 +53,7 @@ struct cpuidle_state {
 #define CPUIDLE_FLAG_BALANCED	(0x40) /* medium latency, moderate savings */
 #define CPUIDLE_FLAG_DEEP	(0x80) /* high latency, large savings */
 #define CPUIDLE_FLAG_IGNORE	(0x100) /* ignore during this idle period */
+#define CPUIDLE_FLAG_TLB_FLUSHED (0x200) /* tlb will be flushed */
 
 #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)