提交 3559d81e 编写于 作者: H Heiner Kallweit 提交者: David S. Miller

r8169: simplify rtl_hw_start_8169

Currently done:
- if mac_version in (01, 02, 03, 04)
	RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
- if mac_version in (01, 02, 03, 04)
	rtl_set_rx_tx_config_registers(tp);
- if mac_version not in (01, 02, 03, 04)
	RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
	rtl_set_rx_tx_config_registers(tp);

So we do exactly the same independent of chip version and can simplify
the code.

In addition remove the call to rtl_init_rxcfg(), it's called in
rtl_init_one() already and the set bits are never touched later.
rtl_init_8168/8101 don't include this call either.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 12d42c50
......@@ -5409,24 +5409,11 @@ static void rtl_hw_start_8169(struct rtl8169_private *tp)
pci_write_config_byte(tp->pci_dev, PCI_CACHE_LINE_SIZE, 0x08);
RTL_W8(tp, Cfg9346, Cfg9346_Unlock);
if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
tp->mac_version == RTL_GIGA_MAC_VER_02 ||
tp->mac_version == RTL_GIGA_MAC_VER_03 ||
tp->mac_version == RTL_GIGA_MAC_VER_04)
RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_init_rxcfg(tp);
RTL_W8(tp, EarlyTxThres, NoEarlyTx);
rtl_set_rx_max_size(tp);
if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
tp->mac_version == RTL_GIGA_MAC_VER_02 ||
tp->mac_version == RTL_GIGA_MAC_VER_03 ||
tp->mac_version == RTL_GIGA_MAC_VER_04)
rtl_set_rx_tx_config_registers(tp);
tp->cp_cmd |= PCIMulRW;
if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
......@@ -5447,14 +5434,9 @@ static void rtl_hw_start_8169(struct rtl8169_private *tp)
RTL_W16(tp, IntrMitigate, 0x0000);
rtl_set_rx_tx_desc_registers(tp);
rtl_set_rx_tx_config_registers(tp);
if (tp->mac_version != RTL_GIGA_MAC_VER_01 &&
tp->mac_version != RTL_GIGA_MAC_VER_02 &&
tp->mac_version != RTL_GIGA_MAC_VER_03 &&
tp->mac_version != RTL_GIGA_MAC_VER_04) {
RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_set_rx_tx_config_registers(tp);
}
RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb);
RTL_W8(tp, Cfg9346, Cfg9346_Lock);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册