Merge tag 'regulator-fix-v4.7-rc2' of...

Merge tag 'regulator-fix-v4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Some driver specific fixes for the regulator subsystem:

   - Some of the changes to the core that were merged in the last merge
     window exposed the fact that the qcom-smd driver hadn't implemented
     the voltage enumeration interfaces like it should.  Since it's a
     simple driver specific fix to implement them do that.

   - Fix the ramp delay configuration for tps51632"

* tag 'regulator-fix-v4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom_smd: add list_voltage callback
  regulator: qcom_smd: add regulator ops for pm8941 lnldo
  regulator: qcom_smd: add list_voltage callback
  regulator: tps51632: Fix setting ramp delay

drivers/regulator/qcom_smd-regulator.c

@@ -140,6 +140,19 @@ static const struct regulator_ops rpm_smps_ldo_ops = {
 	.enable = rpm_reg_enable,
 	.disable = rpm_reg_disable,
 	.is_enabled = rpm_reg_is_enabled,
+	.list_voltage = regulator_list_voltage_linear_range,
+
+	.get_voltage = rpm_reg_get_voltage,
+	.set_voltage = rpm_reg_set_voltage,
+
+	.set_load = rpm_reg_set_load,
+};
+
+static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
+	.list_voltage = regulator_list_voltage_linear_range,
 
 	.get_voltage = rpm_reg_get_voltage,
 	.set_voltage = rpm_reg_set_voltage,
@@ -247,7 +260,7 @@ static const struct regulator_desc pm8941_nldo = {
 static const struct regulator_desc pm8941_lnldo = {
 	.fixed_uV = 1740000,
 	.n_voltages = 1,
-	.ops = &rpm_smps_ldo_ops,
+	.ops = &rpm_smps_ldo_ops_fixed,
 };
 
 static const struct regulator_desc pm8941_switch = {

drivers/regulator/tps51632-regulator.c

@@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
 		int ramp_delay)
 {
 	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
-	int bit = ramp_delay/6000;
+	int bit;
 	int ret;
 
-	if (bit)
-		bit--;
+	if (ramp_delay == 0)
+		bit = 0;
+	else
+		bit = DIV_ROUND_UP(ramp_delay, 6000) - 1;
+
 	ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit));
 	if (ret < 0)
 		dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret);