Merge ath-next from ath.git

Major changes in ath10k:

* Device tree support

* Major restructuring how to handle different WMI interface versions

* Add WMI TLV interface in preparation for new firmware interface support

* Support new firmware branch 10.2.4

* Add thermal cooling interface

* Add hwmon interface to read temparture from the device

And of course lots of small fixes and cleanups.

Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt

+* Qualcomm Atheros ath10k wireless devices
+
+For ath10k devices the calibration data can be provided through Device
+Tree. The node is a child node of the PCI controller.
+
+Required properties:
+-compatible : Should be "qcom,ath10k"
+
+Optional properties:
+- qcom,ath10k-calibration-data : calibration data as an array, the
+				 length can vary between hw versions
+
+
+Example:
+
+pci {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		ath10k@0,0 {
+			reg = <0 0 0 0 0>;
+			device_type = "pci";
+			qcom,ath10k-calibration-data = [ 01 02 03 ... ];
+		};
+	};
+};

drivers/net/wireless/ath/ath10k/Makefile

@@ -8,11 +8,13 @@ ath10k_core-y += mac.o \
 		 htt_tx.o \
 		 txrx.o \
 		 wmi.o \
+		 wmi-tlv.o \
 		 bmi.o
 
 ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
+ath10k_core-$(CONFIG_THERMAL) += thermal.o
 
 obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
 ath10k_pci-y += pci.o \

drivers/net/wireless/ath/ath10k/ce.c

@@ -1093,6 +1093,8 @@ int ath10k_ce_alloc_pipe(struct ath10k *ar, int ce_id,
 		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
 	BUILD_BUG_ON(2*TARGET_10X_NUM_MSDU_DESC >
 		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
+	BUILD_BUG_ON(2*TARGET_TLV_NUM_MSDU_DESC >
+		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
 
 	ce_state->ar = ar;
 	ce_state->id = ce_id;

drivers/net/wireless/ath/ath10k/core.c

@@ -17,6 +17,7 @@
 
 #include <linux/module.h>
 #include <linux/firmware.h>
+#include <linux/of.h>
 
 #include "core.h"
 #include "mac.h"
@@ -27,20 +28,18 @@
 #include "debug.h"
 #include "htt.h"
 #include "testmode.h"
+#include "wmi-ops.h"
 
 unsigned int ath10k_debug_mask;
 static bool uart_print;
-static unsigned int ath10k_p2p;
 static bool skip_otp;
 
 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
 module_param(uart_print, bool, 0644);
-module_param_named(p2p, ath10k_p2p, uint, 0644);
 module_param(skip_otp, bool, 0644);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
-MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
 MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
@@ -48,11 +47,14 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.id = QCA988X_HW_2_0_VERSION,
 		.name = "qca988x hw2.0",
 		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+		.uart_pin = 7,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
 			.otp = QCA988X_HW_2_0_OTP_FILE,
 			.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
+			.board_size = QCA988X_BOARD_DATA_SZ,
+			.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
 		},
 	},
 };
@@ -146,8 +148,8 @@ static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar,
 static int ath10k_push_board_ext_data(struct ath10k *ar, const void *data,
 				      size_t data_len)
 {
-	u32 board_data_size = QCA988X_BOARD_DATA_SZ;
-	u32 board_ext_data_size = QCA988X_BOARD_EXT_DATA_SZ;
+	u32 board_data_size = ar->hw_params.fw.board_size;
+	u32 board_ext_data_size = ar->hw_params.fw.board_ext_size;
 	u32 board_ext_data_addr;
 	int ret;
 
@@ -193,7 +195,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar, const void *data,
 static int ath10k_download_board_data(struct ath10k *ar, const void *data,
 				      size_t data_len)
 {
-	u32 board_data_size = QCA988X_BOARD_DATA_SZ;
+	u32 board_data_size = ar->hw_params.fw.board_size;
 	u32 address;
 	int ret;
 
@@ -249,6 +251,63 @@ static int ath10k_download_cal_file(struct ath10k *ar)
 	return 0;
 }
 
+static int ath10k_download_cal_dt(struct ath10k *ar)
+{
+	struct device_node *node;
+	int data_len;
+	void *data;
+	int ret;
+
+	node = ar->dev->of_node;
+	if (!node)
+		/* Device Tree is optional, don't print any warnings if
+		 * there's no node for ath10k.
+		 */
+		return -ENOENT;
+
+	if (!of_get_property(node, "qcom,ath10k-calibration-data",
+			     &data_len)) {
+		/* The calibration data node is optional */
+		return -ENOENT;
+	}
+
+	if (data_len != QCA988X_CAL_DATA_LEN) {
+		ath10k_warn(ar, "invalid calibration data length in DT: %d\n",
+			    data_len);
+		ret = -EMSGSIZE;
+		goto out;
+	}
+
+	data = kmalloc(data_len, GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_property_read_u8_array(node, "qcom,ath10k-calibration-data",
+					data, data_len);
+	if (ret) {
+		ath10k_warn(ar, "failed to read calibration data from DT: %d\n",
+			    ret);
+		goto out_free;
+	}
+
+	ret = ath10k_download_board_data(ar, data, data_len);
+	if (ret) {
+		ath10k_warn(ar, "failed to download calibration data from Device Tree: %d\n",
+			    ret);
+		goto out_free;
+	}
+
+	ret = 0;
+
+out_free:
+	kfree(data);
+
+out:
+	return ret;
+}
+
 static int ath10k_download_and_run_otp(struct ath10k *ar)
 {
 	u32 result, address = ar->hw_params.patch_load_addr;
@@ -447,7 +506,7 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
 	int ie_id, i, index, bit, ret;
 	struct ath10k_fw_ie *hdr;
 	const u8 *data;
-	__le32 *timestamp;
+	__le32 *timestamp, *version;
 
 	/* first fetch the firmware file (firmware-*.bin) */
 	ar->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, name);
@@ -562,6 +621,17 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
 			ar->otp_len = ie_len;
 
 			break;
+		case ATH10K_FW_IE_WMI_OP_VERSION:
+			if (ie_len != sizeof(u32))
+				break;
+
+			version = (__le32 *)data;
+
+			ar->wmi.op_version = le32_to_cpup(version);
+
+			ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie wmi op version %d\n",
+				   ar->wmi.op_version);
+			break;
 		default:
 			ath10k_warn(ar, "Unknown FW IE: %u\n",
 				    le32_to_cpu(hdr->id));
@@ -582,13 +652,6 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
 		goto err;
 	}
 
-	if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, ar->fw_features) &&
-	    !test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
-		ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well");
-		ret = -EINVAL;
-		goto err;
-	}
-
 	/* now fetch the board file */
 	if (ar->hw_params.fw.board == NULL) {
 		ath10k_err(ar, "board data file not defined");
@@ -624,6 +687,13 @@ static int ath10k_core_fetch_firmware_files(struct ath10k *ar)
 	/* calibration file is optional, don't check for any errors */
 	ath10k_fetch_cal_file(ar);
 
+	ar->fw_api = 4;
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
+
+	ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API4_FILE);
+	if (ret == 0)
+		goto success;
+
 	ar->fw_api = 3;
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
 
@@ -662,7 +732,17 @@ static int ath10k_download_cal_data(struct ath10k *ar)
 	}
 
 	ath10k_dbg(ar, ATH10K_DBG_BOOT,
-		   "boot did not find a calibration file, try OTP next: %d\n",
+		   "boot did not find a calibration file, try DT next: %d\n",
+		   ret);
+
+	ret = ath10k_download_cal_dt(ar);
+	if (ret == 0) {
+		ar->cal_mode = ATH10K_CAL_MODE_DT;
+		goto done;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT,
+		   "boot did not find DT entry, try OTP next: %d\n",
 		   ret);
 
 	ret = ath10k_download_and_run_otp(ar);
@@ -696,7 +776,7 @@ static int ath10k_init_uart(struct ath10k *ar)
 	if (!uart_print)
 		return 0;
 
-	ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 7);
+	ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ar->hw_params.uart_pin);
 	if (ret) {
 		ath10k_warn(ar, "could not enable UART prints (%d)\n", ret);
 		return ret;
@@ -764,6 +844,7 @@ static void ath10k_core_restart(struct work_struct *work)
 	complete_all(&ar->offchan_tx_completed);
 	complete_all(&ar->install_key_done);
 	complete_all(&ar->vdev_setup_done);
+	complete_all(&ar->thermal.wmi_sync);
 	wake_up(&ar->htt.empty_tx_wq);
 	wake_up(&ar->wmi.tx_credits_wq);
 	wake_up(&ar->peer_mapping_wq);
@@ -799,15 +880,62 @@ static void ath10k_core_restart(struct work_struct *work)
 	mutex_unlock(&ar->conf_mutex);
 }
 
-static void ath10k_core_init_max_sta_count(struct ath10k *ar)
+static int ath10k_core_init_firmware_features(struct ath10k *ar)
 {
-	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
-		ar->max_num_peers = TARGET_10X_NUM_PEERS;
-		ar->max_num_stations = TARGET_10X_NUM_STATIONS;
-	} else {
+	if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, ar->fw_features) &&
+	    !test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
+		ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well");
+		return -EINVAL;
+	}
+
+	if (ar->wmi.op_version >= ATH10K_FW_WMI_OP_VERSION_MAX) {
+		ath10k_err(ar, "unsupported WMI OP version (max %d): %d\n",
+			   ATH10K_FW_WMI_OP_VERSION_MAX, ar->wmi.op_version);
+		return -EINVAL;
+	}
+
+	/* Backwards compatibility for firmwares without
+	 * ATH10K_FW_IE_WMI_OP_VERSION.
+	 */
+	if (ar->wmi.op_version == ATH10K_FW_WMI_OP_VERSION_UNSET) {
+		if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
+			if (test_bit(ATH10K_FW_FEATURE_WMI_10_2,
+				     ar->fw_features))
+				ar->wmi.op_version = ATH10K_FW_WMI_OP_VERSION_10_2;
+			else
+				ar->wmi.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
+		} else {
+			ar->wmi.op_version = ATH10K_FW_WMI_OP_VERSION_MAIN;
+		}
+	}
+
+	switch (ar->wmi.op_version) {
+	case ATH10K_FW_WMI_OP_VERSION_MAIN:
 		ar->max_num_peers = TARGET_NUM_PEERS;
 		ar->max_num_stations = TARGET_NUM_STATIONS;
+		ar->max_num_vdevs = TARGET_NUM_VDEVS;
+		ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC;
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_10_1:
+	case ATH10K_FW_WMI_OP_VERSION_10_2:
+	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
+		ar->max_num_peers = TARGET_10X_NUM_PEERS;
+		ar->max_num_stations = TARGET_10X_NUM_STATIONS;
+		ar->max_num_vdevs = TARGET_10X_NUM_VDEVS;
+		ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_TLV:
+		ar->max_num_peers = TARGET_TLV_NUM_PEERS;
+		ar->max_num_stations = TARGET_TLV_NUM_STATIONS;
+		ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC;
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_UNSET:
+	case ATH10K_FW_WMI_OP_VERSION_MAX:
+		WARN_ON(1);
+		return -EINVAL;
 	}
+
+	return 0;
 }
 
 int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
@@ -945,10 +1073,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	if (status)
 		goto err_hif_stop;
 
-	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
-		ar->free_vdev_map = (1LL << TARGET_10X_NUM_VDEVS) - 1;
-	else
-		ar->free_vdev_map = (1LL << TARGET_NUM_VDEVS) - 1;
+	ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
 
 	INIT_LIST_HEAD(&ar->arvifs);
 
@@ -1025,8 +1150,7 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
 	ret = ath10k_bmi_get_target_info(ar, &target_info);
 	if (ret) {
 		ath10k_err(ar, "could not get target info (%d)\n", ret);
-		ath10k_hif_power_down(ar);
-		return ret;
+		goto err_power_down;
 	}
 
 	ar->target_version = target_info.version;
@@ -1035,28 +1159,28 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
 	ret = ath10k_init_hw_params(ar);
 	if (ret) {
 		ath10k_err(ar, "could not get hw params (%d)\n", ret);
-		ath10k_hif_power_down(ar);
-		return ret;
+		goto err_power_down;
 	}
 
 	ret = ath10k_core_fetch_firmware_files(ar);
 	if (ret) {
 		ath10k_err(ar, "could not fetch firmware files (%d)\n", ret);
-		ath10k_hif_power_down(ar);
-		return ret;
+		goto err_power_down;
 	}
 
-	ath10k_core_init_max_sta_count(ar);
+	ret = ath10k_core_init_firmware_features(ar);
+	if (ret) {
+		ath10k_err(ar, "fatal problem with firmware features: %d\n",
+			   ret);
+		goto err_free_firmware_files;
+	}
 
 	mutex_lock(&ar->conf_mutex);
 
 	ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
 	if (ret) {
 		ath10k_err(ar, "could not init core (%d)\n", ret);
-		ath10k_core_free_firmware_files(ar);
-		ath10k_hif_power_down(ar);
-		mutex_unlock(&ar->conf_mutex);
-		return ret;
+		goto err_unlock;
 	}
 
 	ath10k_print_driver_info(ar);
@@ -1066,34 +1190,17 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
 
 	ath10k_hif_power_down(ar);
 	return 0;
-}
-
-static int ath10k_core_check_chip_id(struct ath10k *ar)
-{
-	u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
-
-	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
-		   ar->chip_id, hw_revision);
 
-	/* Check that we are not using hw1.0 (some of them have same pci id
-	 * as hw2.0) before doing anything else as ath10k crashes horribly
-	 * due to missing hw1.0 workarounds. */
-	switch (hw_revision) {
-	case QCA988X_HW_1_0_CHIP_ID_REV:
-		ath10k_err(ar, "ERROR: qca988x hw1.0 is not supported\n");
-		return -EOPNOTSUPP;
+err_unlock:
+	mutex_unlock(&ar->conf_mutex);
 
-	case QCA988X_HW_2_0_CHIP_ID_REV:
-		/* known hardware revision, continue normally */
-		return 0;
+err_free_firmware_files:
+	ath10k_core_free_firmware_files(ar);
 
-	default:
-		ath10k_warn(ar, "Warning: hardware revision unknown (0x%x), expect problems\n",
-			    ar->chip_id);
-		return 0;
-	}
+err_power_down:
+	ath10k_hif_power_down(ar);
 
-	return 0;
+	return ret;
 }
 
 static void ath10k_core_register_work(struct work_struct *work)
@@ -1125,9 +1232,18 @@ static void ath10k_core_register_work(struct work_struct *work)
 		goto err_debug_destroy;
 	}
 
+	status = ath10k_thermal_register(ar);
+	if (status) {
+		ath10k_err(ar, "could not register thermal device: %d\n",
+			   status);
+		goto err_spectral_destroy;
+	}
+
 	set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
 	return;
 
+err_spectral_destroy:
+	ath10k_spectral_destroy(ar);
 err_debug_destroy:
 	ath10k_debug_destroy(ar);
 err_unregister_mac:
@@ -1143,16 +1259,7 @@ static void ath10k_core_register_work(struct work_struct *work)
 
 int ath10k_core_register(struct ath10k *ar, u32 chip_id)
 {
-	int status;
-
 	ar->chip_id = chip_id;
-
-	status = ath10k_core_check_chip_id(ar);
-	if (status) {
-		ath10k_err(ar, "Unsupported chip id 0x%08x\n", ar->chip_id);
-		return status;
-	}
-
 	queue_work(ar->workqueue, &ar->register_work);
 
 	return 0;
@@ -1166,6 +1273,7 @@ void ath10k_core_unregister(struct ath10k *ar)
 	if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
 		return;
 
+	ath10k_thermal_unregister(ar);
 	/* Stop spectral before unregistering from mac80211 to remove the
 	 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
 	 * would be already be free'd recursively, leading to a double free.
@@ -1198,10 +1306,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 	ar->ath_common.priv = ar;
 	ar->ath_common.hw = ar->hw;
-
-	ar->p2p = !!ath10k_p2p;
 	ar->dev = dev;
-
 	ar->hif.ops = hif_ops;
 	ar->hif.bus = bus;
 
@@ -1212,6 +1317,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 	init_completion(&ar->install_key_done);
 	init_completion(&ar->vdev_setup_done);
+	init_completion(&ar->thermal.wmi_sync);
 
 	INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work);
 

drivers/net/wireless/ath/ath10k/core.h

@@ -34,6 +34,7 @@
 #include "../regd.h"
 #include "../dfs_pattern_detector.h"
 #include "spectral.h"
+#include "thermal.h"
 
 #define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
 #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
@@ -120,6 +121,7 @@ struct ath10k_mem_chunk {
 };
 
 struct ath10k_wmi {
+	enum ath10k_fw_wmi_op_version op_version;
 	enum ath10k_htc_ep_id eid;
 	struct completion service_ready;
 	struct completion unified_ready;
@@ -128,6 +130,7 @@ struct ath10k_wmi {
 	struct wmi_cmd_map *cmd;
 	struct wmi_vdev_param_map *vdev_param;
 	struct wmi_pdev_param_map *pdev_param;
+	const struct wmi_ops *ops;
 
 	u32 num_mem_chunks;
 	struct ath10k_mem_chunk mem_chunks[WMI_MAX_MEM_REQS];
@@ -325,6 +328,7 @@ struct ath10k_debug {
 	u32 fw_dbglog_mask;
 	u32 pktlog_filter;
 	u32 reg_addr;
+	u32 nf_cal_period;
 
 	u8 htt_max_amsdu;
 	u8 htt_max_ampdu;
@@ -369,7 +373,7 @@ enum ath10k_fw_features {
 	/* wmi_mgmt_rx_hdr contains extra RSSI information */
 	ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX = 0,
 
-	/* firmware from 10X branch */
+	/* Firmware from 10X branch. Deprecated, don't use in new code. */
 	ATH10K_FW_FEATURE_WMI_10X = 1,
 
 	/* firmware support tx frame management over WMI, otherwise it's HTT */
@@ -378,8 +382,9 @@ enum ath10k_fw_features {
 	/* Firmware does not support P2P */
 	ATH10K_FW_FEATURE_NO_P2P = 3,
 
-	/* Firmware 10.2 feature bit. The ATH10K_FW_FEATURE_WMI_10X feature bit
-	 * is required to be set as well.
+	/* Firmware 10.2 feature bit. The ATH10K_FW_FEATURE_WMI_10X feature
+	 * bit is required to be set as well. Deprecated, don't use in new
+	 * code.
 	 */
 	ATH10K_FW_FEATURE_WMI_10_2 = 4,
 
@@ -401,6 +406,7 @@ enum ath10k_dev_flags {
 enum ath10k_cal_mode {
 	ATH10K_CAL_MODE_FILE,
 	ATH10K_CAL_MODE_OTP,
+	ATH10K_CAL_MODE_DT,
 };
 
 static inline const char *ath10k_cal_mode_str(enum ath10k_cal_mode mode)
@@ -410,6 +416,8 @@ static inline const char *ath10k_cal_mode_str(enum ath10k_cal_mode mode)
 		return "file";
 	case ATH10K_CAL_MODE_OTP:
 		return "otp";
+	case ATH10K_CAL_MODE_DT:
+		return "dt";
 	}
 
 	return "unknown";
@@ -480,12 +488,15 @@ struct ath10k {
 		u32 id;
 		const char *name;
 		u32 patch_load_addr;
+		int uart_pin;
 
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;
 			const char *otp;
 			const char *board;
+			size_t board_size;
+			size_t board_ext_size;
 		} fw;
 	} hw_params;
 
@@ -571,6 +582,7 @@ struct ath10k {
 
 	int max_num_peers;
 	int max_num_stations;
+	int max_num_vdevs;
 
 	struct work_struct offchan_tx_work;
 	struct sk_buff_head offchan_tx_queue;
@@ -610,6 +622,7 @@ struct ath10k {
 		/* protected by conf_mutex */
 		const struct firmware *utf;
 		DECLARE_BITMAP(orig_fw_features, ATH10K_FW_FEATURE_COUNT);
+		enum ath10k_fw_wmi_op_version orig_wmi_op_version;
 
 		/* protected by data_lock */
 		bool utf_monitor;
@@ -622,6 +635,8 @@ struct ath10k {
 		u32 fw_cold_reset_counter;
 	} stats;
 
+	struct ath10k_thermal thermal;
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };

drivers/net/wireless/ath/ath10k/debug.c

@@ -23,6 +23,7 @@
 #include "core.h"
 #include "debug.h"
 #include "hif.h"
+#include "wmi-ops.h"
 
 /* ms */
 #define ATH10K_DEBUG_HTT_STATS_INTERVAL 1000
@@ -123,7 +124,7 @@ EXPORT_SYMBOL(ath10k_info);
 
 void ath10k_print_driver_info(struct ath10k *ar)
 {
-	ath10k_info(ar, "%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d wmi %d.%d.%d.%d cal %s max_sta %d\n",
+	ath10k_info(ar, "%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d wmi %d cal %s max_sta %d\n",
 		    ar->hw_params.name,
 		    ar->target_version,
 		    ar->chip_id,
@@ -131,10 +132,7 @@ void ath10k_print_driver_info(struct ath10k *ar)
 		    ar->fw_api,
 		    ar->htt.target_version_major,
 		    ar->htt.target_version_minor,
-		    ar->fw_version_major,
-		    ar->fw_version_minor,
-		    ar->fw_version_release,
-		    ar->fw_version_build,
+		    ar->wmi.op_version,
 		    ath10k_cal_mode_str(ar->cal_mode),
 		    ar->max_num_stations);
 	ath10k_info(ar, "debug %d debugfs %d tracing %d dfs %d testmode %d\n",
@@ -1607,6 +1605,73 @@ static const struct file_operations fops_cal_data = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_read_nf_cal_period(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	unsigned int len;
+	char buf[32];
+
+	len = scnprintf(buf, sizeof(buf), "%d\n",
+			ar->debug.nf_cal_period);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_write_nf_cal_period(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	unsigned long period;
+	int ret;
+
+	ret = kstrtoul_from_user(user_buf, count, 0, &period);
+	if (ret)
+		return ret;
+
+	if (period > WMI_PDEV_PARAM_CAL_PERIOD_MAX)
+		return -EINVAL;
+
+	/* there's no way to switch back to the firmware default */
+	if (period == 0)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ar->debug.nf_cal_period = period;
+
+	if (ar->state != ATH10K_STATE_ON) {
+		/* firmware is not running, nothing else to do */
+		ret = count;
+		goto exit;
+	}
+
+	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->cal_period,
+					ar->debug.nf_cal_period);
+	if (ret) {
+		ath10k_warn(ar, "cal period cfg failed from debugfs: %d\n",
+			    ret);
+		goto exit;
+	}
+
+	ret = count;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+
+	return ret;
+}
+
+static const struct file_operations fops_nf_cal_period = {
+	.read = ath10k_read_nf_cal_period,
+	.write = ath10k_write_nf_cal_period,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 int ath10k_debug_start(struct ath10k *ar)
 {
 	int ret;
@@ -1642,6 +1707,16 @@ int ath10k_debug_start(struct ath10k *ar)
 			ath10k_warn(ar, "failed to disable pktlog: %d\n", ret);
 	}
 
+	if (ar->debug.nf_cal_period) {
+		ret = ath10k_wmi_pdev_set_param(ar,
+						ar->wmi.pdev_param->cal_period,
+						ar->debug.nf_cal_period);
+		if (ret)
+			/* not serious */
+			ath10k_warn(ar, "cal period cfg failed from debug start: %d\n",
+				    ret);
+	}
+
 	return ret;
 }
 
@@ -1880,6 +1955,9 @@ int ath10k_debug_register(struct ath10k *ar)
 	debugfs_create_file("cal_data", S_IRUSR, ar->debug.debugfs_phy,
 			    ar, &fops_cal_data);
 
+	debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR,
+			    ar->debug.debugfs_phy, ar, &fops_nf_cal_period);
+
 	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
 		debugfs_create_file("dfs_simulate_radar", S_IWUSR,
 				    ar->debug.debugfs_phy, ar,

drivers/net/wireless/ath/ath10k/htt_tx.c

@@ -93,11 +93,6 @@ int ath10k_htt_tx_alloc(struct ath10k_htt *htt)
 
 	spin_lock_init(&htt->tx_lock);
 
-	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, htt->ar->fw_features))
-		htt->max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
-	else
-		htt->max_num_pending_tx = TARGET_NUM_MSDU_DESC;
-
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n",
 		   htt->max_num_pending_tx);
 

drivers/net/wireless/ath/ath10k/hw.h

@@ -37,6 +37,9 @@
 #define ATH10K_FW_API2_FILE		"firmware-2.bin"
 #define ATH10K_FW_API3_FILE		"firmware-3.bin"
 
+/* added support for ATH10K_FW_IE_WMI_OP_VERSION */
+#define ATH10K_FW_API4_FILE		"firmware-4.bin"
+
 #define ATH10K_FW_UTF_FILE		"utf.bin"
 
 /* includes also the null byte */
@@ -58,6 +61,24 @@ enum ath10k_fw_ie_type {
 	ATH10K_FW_IE_FEATURES = 2,
 	ATH10K_FW_IE_FW_IMAGE = 3,
 	ATH10K_FW_IE_OTP_IMAGE = 4,
+
+	/* WMI "operations" interface version, 32 bit value. Supported from
+	 * FW API 4 and above.
+	 */
+	ATH10K_FW_IE_WMI_OP_VERSION = 5,
+};
+
+enum ath10k_fw_wmi_op_version {
+	ATH10K_FW_WMI_OP_VERSION_UNSET = 0,
+
+	ATH10K_FW_WMI_OP_VERSION_MAIN = 1,
+	ATH10K_FW_WMI_OP_VERSION_10_1 = 2,
+	ATH10K_FW_WMI_OP_VERSION_10_2 = 3,
+	ATH10K_FW_WMI_OP_VERSION_TLV = 4,
+	ATH10K_FW_WMI_OP_VERSION_10_2_4 = 5,
+
+	/* keep last */
+	ATH10K_FW_WMI_OP_VERSION_MAX,
 };
 
 /* Known pecularities:
@@ -162,6 +183,15 @@ struct ath10k_pktlog_hdr {
 #define TARGET_10X_NUM_MSDU_DESC		(1024 + 400)
 #define TARGET_10X_MAX_FRAG_ENTRIES		0
 
+/* Target specific defines for WMI-TLV firmware */
+#define TARGET_TLV_NUM_VDEVS			3
+#define TARGET_TLV_NUM_STATIONS			32
+#define TARGET_TLV_NUM_PEERS			((TARGET_TLV_NUM_STATIONS) + \
+						 (TARGET_TLV_NUM_VDEVS) + \
+						 2)
+#define TARGET_TLV_NUM_TIDS			((TARGET_TLV_NUM_PEERS) * 2)
+#define TARGET_TLV_NUM_MSDU_DESC		(1024 + 32)
+
 /* Number of Copy Engines supported */
 #define CE_COUNT 8
 

drivers/net/wireless/ath/ath10k/mac.c

@@ -27,6 +27,8 @@
 #include "htt.h"
 #include "txrx.h"
 #include "testmode.h"
+#include "wmi.h"
+#include "wmi-ops.h"
 
 /**********/
 /* Crypto */
@@ -267,7 +269,10 @@ chan_to_phymode(const struct cfg80211_chan_def *chandef)
 	case IEEE80211_BAND_2GHZ:
 		switch (chandef->width) {
 		case NL80211_CHAN_WIDTH_20_NOHT:
-			phymode = MODE_11G;
+			if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
+				phymode = MODE_11B;
+			else
+				phymode = MODE_11G;
 			break;
 		case NL80211_CHAN_WIDTH_20:
 			phymode = MODE_11NG_HT20;
@@ -1046,28 +1051,85 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
 			    arvif->vdev_id, ret);
 }
 
-/*
- * Review this when mac80211 gains per-interface powersave support.
- */
+static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	u32 value;
+	int ret;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER;
+	else
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+
+	param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n",
+			    value, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	u32 value;
+	int ret;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_PSPOLL_COUNT_UAPSD;
+	else
+		value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
+
+	param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  param, value);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n",
+			    value, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
 {
 	struct ath10k *ar = arvif->ar;
+	struct ieee80211_vif *vif = arvif->vif;
 	struct ieee80211_conf *conf = &ar->hw->conf;
 	enum wmi_sta_powersave_param param;
 	enum wmi_sta_ps_mode psmode;
 	int ret;
+	int ps_timeout;
 
 	lockdep_assert_held(&arvif->ar->conf_mutex);
 
 	if (arvif->vif->type != NL80211_IFTYPE_STATION)
 		return 0;
 
-	if (conf->flags & IEEE80211_CONF_PS) {
+	if (vif->bss_conf.ps) {
 		psmode = WMI_STA_PS_MODE_ENABLED;
 		param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
 
+		ps_timeout = conf->dynamic_ps_timeout;
+		if (ps_timeout == 0) {
+			/* Firmware doesn't like 0 */
+			ps_timeout = ieee80211_tu_to_usec(
+				vif->bss_conf.beacon_int) / 1000;
+		}
+
 		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
-						  conf->dynamic_ps_timeout);
+						  ps_timeout);
 		if (ret) {
 			ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n",
 				    arvif->vdev_id, ret);
@@ -1409,9 +1471,22 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
 		if (vif->bss_conf.qos)
 			arg->peer_flags |= WMI_PEER_QOS;
 		break;
+	case WMI_VDEV_TYPE_IBSS:
+		if (sta->wme)
+			arg->peer_flags |= WMI_PEER_QOS;
+		break;
 	default:
 		break;
 	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
+		   sta->addr, !!(arg->peer_flags & WMI_PEER_QOS));
+}
+
+static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta)
+{
+	/* First 4 rates in ath10k_rates are CCK (11b) rates. */
+	return sta->supp_rates[IEEE80211_BAND_2GHZ] >> 4;
 }
 
 static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
@@ -1428,8 +1503,10 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 				phymode = MODE_11NG_HT40;
 			else
 				phymode = MODE_11NG_HT20;
-		} else {
+		} else if (ath10k_mac_sta_has_11g_rates(sta)) {
 			phymode = MODE_11G;
+		} else {
+			phymode = MODE_11B;
 		}
 
 		break;
@@ -2894,10 +2971,11 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	arvif->vdev_id = bit;
 	arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
 
-	if (ar->p2p)
-		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
-
 	switch (vif->type) {
+	case NL80211_IFTYPE_P2P_DEVICE:
+		arvif->vdev_type = WMI_VDEV_TYPE_STA;
+		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NL80211_IFTYPE_STATION:
 		arvif->vdev_type = WMI_VDEV_TYPE_STA;
@@ -3026,22 +3104,16 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 			goto err_peer_delete;
 		}
 
-		param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
-		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
-		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
-						  param, value);
+		ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
 		if (ret) {
-			ath10k_warn(ar, "failed to set vdev %i TX wake thresh: %d\n",
+			ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
 				    arvif->vdev_id, ret);
 			goto err_peer_delete;
 		}
 
-		param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
-		value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
-		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
-						  param, value);
+		ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
 		if (ret) {
-			ath10k_warn(ar, "failed to set vdev %i PSPOLL count: %d\n",
+			ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
 				    arvif->vdev_id, ret);
 			goto err_peer_delete;
 		}
@@ -3314,6 +3386,13 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 			ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
 	}
 
+	if (changed & BSS_CHANGED_PS) {
+		ret = ath10k_mac_vif_setup_ps(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
@@ -3583,8 +3662,9 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
 				    sta->addr, smps, err);
 	}
 
-	if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates\n",
+	if (changed & IEEE80211_RC_SUPP_RATES_CHANGED ||
+	    changed & IEEE80211_RC_NSS_CHANGED) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates/nss\n",
 			   sta->addr);
 
 		err = ath10k_station_assoc(ar, arvif->vif, sta, true);
@@ -3808,6 +3888,20 @@ static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
 	if (ret)
 		ath10k_warn(ar, "failed to set rx wake param: %d\n", ret);
 
+	ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
 exit:
 	return ret;
 }
@@ -3989,29 +4083,6 @@ static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 	return ret;
 }
 
-static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
-{
-	struct ath10k *ar = hw->priv;
-	struct ath10k_vif *arvif;
-	int ret = 0;
-
-	mutex_lock(&ar->conf_mutex);
-	list_for_each_entry(arvif, &ar->arvifs, list) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d fragmentation threshold %d\n",
-			   arvif->vdev_id, value);
-
-		ret = ath10k_mac_set_frag(arvif, value);
-		if (ret) {
-			ath10k_warn(ar, "failed to set fragmentation threshold for vdev %d: %d\n",
-				    arvif->vdev_id, ret);
-			break;
-		}
-	}
-	mutex_unlock(&ar->conf_mutex);
-
-	return ret;
-}
-
 static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			 u32 queues, bool drop)
 {
@@ -4655,7 +4726,6 @@ static const struct ieee80211_ops ath10k_ops = {
 	.remain_on_channel		= ath10k_remain_on_channel,
 	.cancel_remain_on_channel	= ath10k_cancel_remain_on_channel,
 	.set_rts_threshold		= ath10k_set_rts_threshold,
-	.set_frag_threshold		= ath10k_set_frag_threshold,
 	.flush				= ath10k_flush,
 	.tx_last_beacon			= ath10k_tx_last_beacon,
 	.set_antenna			= ath10k_set_antenna,
@@ -4746,6 +4816,9 @@ static const struct ieee80211_channel ath10k_5ghz_channels[] = {
 	CHAN5G(165, 5825, 0),
 };
 
+/* Note: Be careful if you re-order these. There is code which depends on this
+ * ordering.
+ */
 static struct ieee80211_rate ath10k_rates[] = {
 	/* CCK */
 	RATETAB_ENT(10,  0x82, 0),
@@ -4799,6 +4872,10 @@ static const struct ieee80211_iface_limit ath10k_if_limits[] = {
 	.types	= BIT(NL80211_IFTYPE_P2P_GO)
 	},
 	{
+	.max	= 1,
+	.types	= BIT(NL80211_IFTYPE_P2P_DEVICE)
+	},
+	{
 	.max	= 7,
 	.types	= BIT(NL80211_IFTYPE_AP)
 	},
@@ -5018,6 +5095,7 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
 		ar->hw->wiphy->interface_modes |=
+			BIT(NL80211_IFTYPE_P2P_DEVICE) |
 			BIT(NL80211_IFTYPE_P2P_CLIENT) |
 			BIT(NL80211_IFTYPE_P2P_GO);
 
@@ -5062,16 +5140,26 @@ int ath10k_mac_register(struct ath10k *ar)
 	 */
 	ar->hw->queues = 4;
 
-	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
-		ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
-		ar->hw->wiphy->n_iface_combinations =
-			ARRAY_SIZE(ath10k_10x_if_comb);
-	} else {
+	switch (ar->wmi.op_version) {
+	case ATH10K_FW_WMI_OP_VERSION_MAIN:
+	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
 		ar->hw->wiphy->n_iface_combinations =
 			ARRAY_SIZE(ath10k_if_comb);
-
 		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_10_1:
+	case ATH10K_FW_WMI_OP_VERSION_10_2:
+	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
+		ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
+		ar->hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(ath10k_10x_if_comb);
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_UNSET:
+	case ATH10K_FW_WMI_OP_VERSION_MAX:
+		WARN_ON(1);
+		ret = -EINVAL;
+		goto err_free;
 	}
 
 	ar->hw->netdev_features = NETIF_F_HW_CSUM;

drivers/net/wireless/ath/ath10k/pci.c

@@ -64,6 +64,14 @@ static const struct pci_device_id ath10k_pci_id_table[] = {
 	{0}
 };
 
+static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
+	/* QCA988X pre 2.0 chips are not supported because they need some nasty
+	 * hacks. ath10k doesn't have them and these devices crash horribly
+	 * because of that.
+	 */
+	{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
+};
+
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
 static int ath10k_pci_cold_reset(struct ath10k *ar);
 static int ath10k_pci_warm_reset(struct ath10k *ar);
@@ -2476,6 +2484,23 @@ static void ath10k_pci_release(struct ath10k *ar)
 	pci_disable_device(pdev);
 }
 
+static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
+{
+	const struct ath10k_pci_supp_chip *supp_chip;
+	int i;
+	u32 rev_id = MS(chip_id, SOC_CHIP_ID_REV);
+
+	for (i = 0; i < ARRAY_SIZE(ath10k_pci_supp_chips); i++) {
+		supp_chip = &ath10k_pci_supp_chips[i];
+
+		if (supp_chip->dev_id == dev_id &&
+		    supp_chip->rev_id == rev_id)
+			return true;
+	}
+
+	return false;
+}
+
 static int ath10k_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *pci_dev)
 {
@@ -2521,6 +2546,12 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_sleep;
 	}
 
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
+		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+			   pdev->device, chip_id);
+		goto err_sleep;
+	}
+
 	ret = ath10k_pci_alloc_pipes(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",

drivers/net/wireless/ath/ath10k/pci.h

@@ -152,6 +152,11 @@ struct ath10k_pci_pipe {
 	struct tasklet_struct intr;
 };
 
+struct ath10k_pci_supp_chip {
+	u32 dev_id;
+	u32 rev_id;
+};
+
 struct ath10k_pci {
 	struct pci_dev *pdev;
 	struct device *dev;

drivers/net/wireless/ath/ath10k/spectral.c

@@ -17,6 +17,7 @@
 #include <linux/relay.h>
 #include "core.h"
 #include "debug.h"
+#include "wmi-ops.h"
 
 static void send_fft_sample(struct ath10k *ar,
 			    const struct fft_sample_tlv *fft_sample_tlv)

drivers/net/wireless/ath/ath10k/testmode.c

@@ -187,13 +187,14 @@ static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
 
 	memcpy(ar->testmode.orig_fw_features, ar->fw_features,
 	       sizeof(ar->fw_features));
+	ar->testmode.orig_wmi_op_version = ar->wmi.op_version;
 
 	/* utf.bin firmware image does not advertise firmware features. Do
 	 * an ugly hack where we force the firmware features so that wmi.c
 	 * will use the correct WMI interface.
 	 */
 	memset(ar->fw_features, 0, sizeof(ar->fw_features));
-	__set_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features);
+	ar->wmi.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
 
 	ret = ath10k_hif_power_up(ar);
 	if (ret) {
@@ -224,6 +225,7 @@ static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
 	/* return the original firmware features */
 	memcpy(ar->fw_features, ar->testmode.orig_fw_features,
 	       sizeof(ar->fw_features));
+	ar->wmi.op_version = ar->testmode.orig_wmi_op_version;
 
 	release_firmware(ar->testmode.utf);
 	ar->testmode.utf = NULL;
@@ -250,6 +252,7 @@ static void __ath10k_tm_cmd_utf_stop(struct ath10k *ar)
 	/* return the original firmware features */
 	memcpy(ar->fw_features, ar->testmode.orig_fw_features,
 	       sizeof(ar->fw_features));
+	ar->wmi.op_version = ar->testmode.orig_wmi_op_version;
 
 	release_firmware(ar->testmode.utf);
 	ar->testmode.utf = NULL;

drivers/net/wireless/ath/ath10k/thermal.c

+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include "core.h"
+#include "debug.h"
+#include "wmi-ops.h"
+
+static int ath10k_thermal_get_active_vifs(struct ath10k *ar,
+					  enum wmi_vdev_type type)
+{
+	struct ath10k_vif *arvif;
+	int count = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		if (!arvif->is_started)
+			continue;
+
+		if (!arvif->is_up)
+			continue;
+
+		if (arvif->vdev_type != type)
+			continue;
+
+		count++;
+	}
+	return count;
+}
+
+static int ath10k_thermal_get_max_dutycycle(struct thermal_cooling_device *cdev,
+					    unsigned long *state)
+{
+	*state = ATH10K_QUIET_DUTY_CYCLE_MAX;
+
+	return 0;
+}
+
+static int ath10k_thermal_get_cur_dutycycle(struct thermal_cooling_device *cdev,
+					    unsigned long *state)
+{
+	struct ath10k *ar = cdev->devdata;
+
+	mutex_lock(&ar->conf_mutex);
+	*state = ar->thermal.duty_cycle;
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
+					    unsigned long duty_cycle)
+{
+	struct ath10k *ar = cdev->devdata;
+	u32 period, duration, enabled;
+	int num_bss, ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+	if (ar->state != ATH10K_STATE_ON) {
+		ret = -ENETDOWN;
+		goto out;
+	}
+
+	if (duty_cycle > ATH10K_QUIET_DUTY_CYCLE_MAX) {
+		ath10k_warn(ar, "duty cycle %ld is exceeding the limit %d\n",
+			    duty_cycle, ATH10K_QUIET_DUTY_CYCLE_MAX);
+		ret = -EINVAL;
+		goto out;
+	}
+	/* TODO: Right now, thermal mitigation is handled only for single/multi
+	 * vif AP mode. Since quiet param is not validated in STA mode, it needs
+	 * to be investigated further to handle multi STA and multi-vif (AP+STA)
+	 * mode properly.
+	 */
+	num_bss = ath10k_thermal_get_active_vifs(ar, WMI_VDEV_TYPE_AP);
+	if (!num_bss) {
+		ath10k_warn(ar, "no active AP interfaces\n");
+		ret = -ENETDOWN;
+		goto out;
+	}
+	period = max(ATH10K_QUIET_PERIOD_MIN,
+		     (ATH10K_QUIET_PERIOD_DEFAULT / num_bss));
+	duration = period * (duty_cycle / 100);
+	enabled = duration ? 1 : 0;
+
+	ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
+					     ATH10K_QUIET_START_OFFSET,
+					     enabled);
+	if (ret) {
+		ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n",
+			    period, duration, enabled, ret);
+		goto out;
+	}
+	ar->thermal.duty_cycle = duty_cycle;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static struct thermal_cooling_device_ops ath10k_thermal_ops = {
+	.get_max_state = ath10k_thermal_get_max_dutycycle,
+	.get_cur_state = ath10k_thermal_get_cur_dutycycle,
+	.set_cur_state = ath10k_thermal_set_cur_dutycycle,
+};
+
+static ssize_t ath10k_thermal_show_temp(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct ath10k *ar = dev_get_drvdata(dev);
+	int ret, temperature;
+
+	mutex_lock(&ar->conf_mutex);
+
+	/* Can't get temperature when the card is off */
+	if (ar->state != ATH10K_STATE_ON) {
+		ret = -ENETDOWN;
+		goto out;
+	}
+
+	reinit_completion(&ar->thermal.wmi_sync);
+	ret = ath10k_wmi_pdev_get_temperature(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to read temperature %d\n", ret);
+		goto out;
+	}
+
+	if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) {
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	ret = wait_for_completion_timeout(&ar->thermal.wmi_sync,
+					  ATH10K_THERMAL_SYNC_TIMEOUT_HZ);
+	if (ret == 0) {
+		ath10k_warn(ar, "failed to synchronize thermal read\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	temperature = ar->thermal.temperature;
+	spin_unlock_bh(&ar->data_lock);
+
+	ret = snprintf(buf, PAGE_SIZE, "%d", temperature);
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature)
+{
+	spin_lock_bh(&ar->data_lock);
+	ar->thermal.temperature = temperature;
+	spin_unlock_bh(&ar->data_lock);
+	complete(&ar->thermal.wmi_sync);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ath10k_thermal_show_temp,
+			  NULL, 0);
+
+static struct attribute *ath10k_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ath10k_hwmon);
+
+int ath10k_thermal_register(struct ath10k *ar)
+{
+	struct thermal_cooling_device *cdev;
+	struct device *hwmon_dev;
+	int ret;
+
+	cdev = thermal_cooling_device_register("ath10k_thermal", ar,
+					       &ath10k_thermal_ops);
+
+	if (IS_ERR(cdev)) {
+		ath10k_err(ar, "failed to setup thermal device result: %ld\n",
+			   PTR_ERR(cdev));
+		return -EINVAL;
+	}
+
+	ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj,
+				"cooling_device");
+	if (ret) {
+		ath10k_err(ar, "failed to create thermal symlink\n");
+		goto err_cooling_destroy;
+	}
+
+	ar->thermal.cdev = cdev;
+
+	/* Do not register hwmon device when temperature reading is not
+	 * supported by firmware
+	 */
+	if (ar->wmi.op_version != ATH10K_FW_WMI_OP_VERSION_10_2_4)
+		return 0;
+
+	/* Avoid linking error on devm_hwmon_device_register_with_groups, I
+	 * guess linux/hwmon.h is missing proper stubs. */
+	if (!config_enabled(HWMON))
+		return 0;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
+							   "ath10k_hwmon", ar,
+							   ath10k_hwmon_groups);
+	if (IS_ERR(hwmon_dev)) {
+		ath10k_err(ar, "failed to register hwmon device: %ld\n",
+			   PTR_ERR(hwmon_dev));
+		ret = -EINVAL;
+		goto err_remove_link;
+	}
+	return 0;
+
+err_remove_link:
+	sysfs_remove_link(&ar->dev->kobj, "thermal_sensor");
+err_cooling_destroy:
+	thermal_cooling_device_unregister(cdev);
+	return ret;
+}
+
+void ath10k_thermal_unregister(struct ath10k *ar)
+{
+	thermal_cooling_device_unregister(ar->thermal.cdev);
+	sysfs_remove_link(&ar->dev->kobj, "cooling_device");
+}

drivers/net/wireless/ath/ath10k/thermal.h

+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _THERMAL_
+#define _THERMAL_
+
+#define ATH10K_QUIET_PERIOD_DEFAULT     100
+#define ATH10K_QUIET_PERIOD_MIN         25
+#define ATH10K_QUIET_START_OFFSET       10
+#define ATH10K_QUIET_DUTY_CYCLE_MAX     70
+#define ATH10K_HWMON_NAME_LEN           15
+#define ATH10K_THERMAL_SYNC_TIMEOUT_HZ (5*HZ)
+
+struct ath10k_thermal {
+	struct thermal_cooling_device *cdev;
+	struct completion wmi_sync;
+
+	/* protected by conf_mutex */
+	u32 duty_cycle;
+	/* temperature value in Celcius degree
+	 * protected by data_lock
+	 */
+	int temperature;
+};
+
+#ifdef CONFIG_THERMAL
+int ath10k_thermal_register(struct ath10k *ar);
+void ath10k_thermal_unregister(struct ath10k *ar);
+void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature);
+#else
+static inline int ath10k_thermal_register(struct ath10k *ar)
+{
+	return 0;
+}
+
+static inline void ath10k_thermal_unregister(struct ath10k *ar)
+{
+}
+
+static inline void ath10k_thermal_event_temperature(struct ath10k *ar,
+						    int temperature)
+{
+}
+
+#endif
+#endif /* _THERMAL_ */

drivers/net/wireless/ath/ath10k/wmi.h

@@ -109,6 +109,45 @@ enum wmi_service {
 	WMI_SERVICE_BURST,
 	WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 	WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
+	WMI_SERVICE_ROAM_SCAN_OFFLOAD,
+	WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
+	WMI_SERVICE_EARLY_RX,
+	WMI_SERVICE_STA_SMPS,
+	WMI_SERVICE_FWTEST,
+	WMI_SERVICE_STA_WMMAC,
+	WMI_SERVICE_TDLS,
+	WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
+	WMI_SERVICE_ADAPTIVE_OCS,
+	WMI_SERVICE_BA_SSN_SUPPORT,
+	WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
+	WMI_SERVICE_WLAN_HB,
+	WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
+	WMI_SERVICE_BATCH_SCAN,
+	WMI_SERVICE_QPOWER,
+	WMI_SERVICE_PLMREQ,
+	WMI_SERVICE_THERMAL_MGMT,
+	WMI_SERVICE_RMC,
+	WMI_SERVICE_MHF_OFFLOAD,
+	WMI_SERVICE_COEX_SAR,
+	WMI_SERVICE_BCN_TXRATE_OVERRIDE,
+	WMI_SERVICE_NAN,
+	WMI_SERVICE_L1SS_STAT,
+	WMI_SERVICE_ESTIMATE_LINKSPEED,
+	WMI_SERVICE_OBSS_SCAN,
+	WMI_SERVICE_TDLS_OFFCHAN,
+	WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
+	WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
+	WMI_SERVICE_IBSS_PWRSAVE,
+	WMI_SERVICE_LPASS,
+	WMI_SERVICE_EXTSCAN,
+	WMI_SERVICE_D0WOW,
+	WMI_SERVICE_HSOFFLOAD,
+	WMI_SERVICE_ROAM_HO_OFFLOAD,
+	WMI_SERVICE_RX_FULL_REORDER,
+	WMI_SERVICE_DHCP_OFFLOAD,
+	WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
+	WMI_SERVICE_MDNS_OFFLOAD,
+	WMI_SERVICE_SAP_AUTH_OFFLOAD,
 
 	/* keep last */
 	WMI_SERVICE_MAX,
@@ -215,6 +254,45 @@ static inline char *wmi_service_name(int service_id)
 	SVCSTR(WMI_SERVICE_BURST);
 	SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
 	SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
+	SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
+	SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
+	SVCSTR(WMI_SERVICE_EARLY_RX);
+	SVCSTR(WMI_SERVICE_STA_SMPS);
+	SVCSTR(WMI_SERVICE_FWTEST);
+	SVCSTR(WMI_SERVICE_STA_WMMAC);
+	SVCSTR(WMI_SERVICE_TDLS);
+	SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
+	SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
+	SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
+	SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
+	SVCSTR(WMI_SERVICE_WLAN_HB);
+	SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
+	SVCSTR(WMI_SERVICE_BATCH_SCAN);
+	SVCSTR(WMI_SERVICE_QPOWER);
+	SVCSTR(WMI_SERVICE_PLMREQ);
+	SVCSTR(WMI_SERVICE_THERMAL_MGMT);
+	SVCSTR(WMI_SERVICE_RMC);
+	SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
+	SVCSTR(WMI_SERVICE_COEX_SAR);
+	SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
+	SVCSTR(WMI_SERVICE_NAN);
+	SVCSTR(WMI_SERVICE_L1SS_STAT);
+	SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
+	SVCSTR(WMI_SERVICE_OBSS_SCAN);
+	SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
+	SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
+	SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
+	SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
+	SVCSTR(WMI_SERVICE_LPASS);
+	SVCSTR(WMI_SERVICE_EXTSCAN);
+	SVCSTR(WMI_SERVICE_D0WOW);
+	SVCSTR(WMI_SERVICE_HSOFFLOAD);
+	SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
+	SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
+	SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
+	SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
+	SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
+	SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
 	default:
 		return NULL;
 	}
@@ -472,6 +550,7 @@ struct wmi_cmd_map {
 	u32 force_fw_hang_cmdid;
 	u32 gpio_config_cmdid;
 	u32 gpio_output_cmdid;
+	u32 pdev_get_temperature_cmdid;
 };
 
 /*
@@ -1076,6 +1155,11 @@ enum wmi_10_2_cmd_id {
 	WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
 	WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
 	WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
+	WMI_10_2_PDEV_GET_INFO,
+	WMI_10_2_VDEV_GET_INFO,
+	WMI_10_2_VDEV_ATF_REQUEST_CMDID,
+	WMI_10_2_PEER_ATF_REQUEST_CMDID,
+	WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
 	WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
 };
 
@@ -1117,6 +1201,8 @@ enum wmi_10_2_event_id {
 	WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
 	WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
 	WMI_10_2_WDS_PEER_EVENTID,
+	WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
+	WMI_10_2_PDEV_TEMPERATURE_EVENTID,
 	WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
 };
 
@@ -1862,6 +1948,11 @@ struct wmi_resource_config_10x {
 	__le32 max_frag_entries;
 } __packed;
 
+enum wmi_10_2_feature_mask {
+	WMI_10_2_RX_BATCH_MODE = BIT(0),
+	WMI_10_2_ATF_CONFIG    = BIT(1),
+};
+
 struct wmi_resource_config_10_2 {
 	struct wmi_resource_config_10x common;
 	__le32 max_peer_ext_stats;
@@ -1870,7 +1961,7 @@ struct wmi_resource_config_10_2 {
 	__le32 be_min_free;
 	__le32 vi_min_free;
 	__le32 vo_min_free;
-	__le32 rx_batchmode; /* 0-disable, 1-enable */
+	__le32 feature_mask;
 } __packed;
 
 #define NUM_UNITS_IS_NUM_VDEVS   0x1
@@ -2505,6 +2596,7 @@ struct wmi_pdev_param_map {
 	u32 fast_channel_reset;
 	u32 burst_dur;
 	u32 burst_enable;
+	u32 cal_period;
 };
 
 #define WMI_PDEV_PARAM_UNSUPPORTED 0
@@ -2715,6 +2807,9 @@ enum wmi_10x_pdev_param {
 	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
 	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
 	WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
+	WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
+	WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
+	WMI_10X_PDEV_PARAM_CAL_PERIOD
 };
 
 struct wmi_pdev_set_param_cmd {
@@ -2722,6 +2817,9 @@ struct wmi_pdev_set_param_cmd {
 	__le32 param_value;
 } __packed;
 
+/* valid period is 1 ~ 60000ms, unit in millisecond */
+#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
+
 struct wmi_pdev_get_tpc_config_cmd {
 	/* parameter   */
 	__le32 param;
@@ -3930,6 +4028,13 @@ enum wmi_sta_ps_param_pspoll_count {
 	 * Values greater than 0 indicate the maximum numer of PS-Poll frames
 	 * FW will send before waking up.
 	 */
+
+	/* When u-APSD is enabled the firmware will be very reluctant to exit
+	 * STA PS. This could result in very poor Rx performance with STA doing
+	 * PS-Poll for each and every buffered frame. This value is a bit
+	 * arbitrary.
+	 */
+	WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
 };
 
 /*
@@ -4120,7 +4225,7 @@ struct wmi_bcn_info {
 
 struct wmi_host_swba_event {
 	__le32 vdev_map;
-	struct wmi_bcn_info bcn_info[1];
+	struct wmi_bcn_info bcn_info[0];
 } __packed;
 
 #define WMI_MAX_AP_VDEV 16
@@ -4567,6 +4672,58 @@ struct wmi_dbglog_cfg_cmd {
 
 #define WMI_MAX_MEM_REQS 16
 
+struct wmi_scan_ev_arg {
+	__le32 event_type; /* %WMI_SCAN_EVENT_ */
+	__le32 reason; /* %WMI_SCAN_REASON_ */
+	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
+	__le32 scan_req_id;
+	__le32 scan_id;
+	__le32 vdev_id;
+};
+
+struct wmi_mgmt_rx_ev_arg {
+	__le32 channel;
+	__le32 snr;
+	__le32 rate;
+	__le32 phy_mode;
+	__le32 buf_len;
+	__le32 status; /* %WMI_RX_STATUS_ */
+};
+
+struct wmi_ch_info_ev_arg {
+	__le32 err_code;
+	__le32 freq;
+	__le32 cmd_flags;
+	__le32 noise_floor;
+	__le32 rx_clear_count;
+	__le32 cycle_count;
+};
+
+struct wmi_vdev_start_ev_arg {
+	__le32 vdev_id;
+	__le32 req_id;
+	__le32 resp_type; /* %WMI_VDEV_RESP_ */
+	__le32 status;
+};
+
+struct wmi_peer_kick_ev_arg {
+	const u8 *mac_addr;
+};
+
+struct wmi_swba_ev_arg {
+	__le32 vdev_map;
+	const struct wmi_tim_info *tim_info[WMI_MAX_AP_VDEV];
+	const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
+};
+
+struct wmi_phyerr_ev_arg {
+	__le32 num_phyerrs;
+	__le32 tsf_l32;
+	__le32 tsf_u32;
+	__le32 buf_len;
+	const struct wmi_phyerr *phyerrs;
+};
+
 struct wmi_svc_rdy_ev_arg {
 	__le32 min_tx_power;
 	__le32 max_tx_power;
@@ -4574,6 +4731,7 @@ struct wmi_svc_rdy_ev_arg {
 	__le32 vht_cap;
 	__le32 sw_ver0;
 	__le32 sw_ver1;
+	__le32 fw_build;
 	__le32 phy_capab;
 	__le32 num_rf_chains;
 	__le32 eeprom_rd;
@@ -4583,83 +4741,93 @@ struct wmi_svc_rdy_ev_arg {
 	const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
 };
 
+struct wmi_rdy_ev_arg {
+	__le32 sw_version;
+	__le32 abi_version;
+	__le32 status;
+	const u8 *mac_addr;
+};
+
+struct wmi_pdev_temperature_event {
+	/* temperature value in Celcius degree */
+	__le32 temperature;
+} __packed;
+
 struct ath10k;
 struct ath10k_vif;
-struct ath10k_fw_stats;
+struct ath10k_fw_stats_pdev;
+struct ath10k_fw_stats_peer;
 
 int ath10k_wmi_attach(struct ath10k *ar);
 void ath10k_wmi_detach(struct ath10k *ar);
 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
 
+struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
 int ath10k_wmi_connect(struct ath10k *ar);
 
 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
-
-int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt);
-int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
-int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
-				  u16 rd5g, u16 ctl2g, u16 ctl5g,
-				  enum wmi_dfs_region dfs_reg);
-int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value);
-int ath10k_wmi_cmd_init(struct ath10k *ar);
-int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *);
+int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
+			       u32 cmd_id);
 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
-int ath10k_wmi_stop_scan(struct ath10k *ar,
-			 const struct wmi_stop_scan_arg *arg);
-int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id,
-			   enum wmi_vdev_type type,
-			   enum wmi_vdev_subtype subtype,
-			   const u8 macaddr[ETH_ALEN]);
-int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id);
-int ath10k_wmi_vdev_start(struct ath10k *ar,
-			  const struct wmi_vdev_start_request_arg *);
-int ath10k_wmi_vdev_restart(struct ath10k *ar,
-			    const struct wmi_vdev_start_request_arg *);
-int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id);
-int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid,
-		       const u8 *bssid);
-int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id);
-int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
-			      u32 param_id, u32 param_value);
-int ath10k_wmi_vdev_install_key(struct ath10k *ar,
-				const struct wmi_vdev_install_key_arg *arg);
-int ath10k_wmi_vdev_spectral_conf(struct ath10k *ar,
-				  const struct wmi_vdev_spectral_conf_arg *arg);
-int ath10k_wmi_vdev_spectral_enable(struct ath10k *ar, u32 vdev_id, u32 trigger,
-				    u32 enable);
-int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
-			   const u8 peer_addr[ETH_ALEN]);
-int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id,
-			   const u8 peer_addr[ETH_ALEN]);
-int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id,
-			  const u8 peer_addr[ETH_ALEN], u32 tid_bitmap);
-int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id,
-			      const u8 *peer_addr,
-			      enum wmi_peer_param param_id, u32 param_value);
-int ath10k_wmi_peer_assoc(struct ath10k *ar,
-			  const struct wmi_peer_assoc_complete_arg *arg);
-int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id,
-			  enum wmi_sta_ps_mode psmode);
-int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id,
-				enum wmi_sta_powersave_param param_id,
-				u32 value);
-int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac,
-			       enum wmi_ap_ps_peer_param param_id, u32 value);
-int ath10k_wmi_scan_chan_list(struct ath10k *ar,
-			      const struct wmi_scan_chan_list_arg *arg);
-int ath10k_wmi_beacon_send_ref_nowait(struct ath10k_vif *arvif);
-int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
-				   const struct wmi_pdev_set_wmm_params_arg *arg);
-int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
-int ath10k_wmi_force_fw_hang(struct ath10k *ar,
-			     enum wmi_force_fw_hang_type type, u32 delay_ms);
-int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb);
-int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable);
-int ath10k_wmi_pull_fw_stats(struct ath10k *ar, struct sk_buff *skb,
-			     struct ath10k_fw_stats *stats);
-int ath10k_wmi_pdev_pktlog_enable(struct ath10k *ar, u32 ev_list);
-int ath10k_wmi_pdev_pktlog_disable(struct ath10k *ar);
+
+void ath10k_wmi_pull_pdev_stats(const struct wmi_pdev_stats *src,
+				struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
+				struct ath10k_fw_stats_peer *dst);
+void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
+				    struct wmi_host_mem_chunks *chunks);
+void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
+				      const struct wmi_start_scan_arg *arg);
+void ath10k_wmi_pdev_set_wmm_param(struct wmi_wmm_params *params,
+				   const struct wmi_wmm_params_arg *arg);
+void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
+				const struct wmi_channel_arg *arg);
+int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
+
+int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_dfs(struct ath10k *ar,
+			  const struct wmi_phyerr *phyerr, u64 tsf);
+void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
+				    const struct wmi_phyerr *phyerr,
+				    u64 tsf);
+void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
+					     struct sk_buff *skb);
+void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
+					     struct sk_buff *skb);
+void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
+					 struct sk_buff *skb);
+void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
+						struct sk_buff *skb);
+void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
 
 #endif /* _WMI_H_ */